FINDER MODULAR CONTACTOR 25 WITH 4 CONTACTS 223402304340 Type 22.34 is a modular contactor, 25 A, 4 contacts, with screw terminals, for mounting on 35mm rail (EN 60715). Features: Width 35 mm NO contact opening ≥ 3 mm, double break Coil and contacts for continuous duty Silent AC/DC coil (with protection varistor) Protective separation between coil and contacts (reinforced insulation) Standard version with mechanical indicator and LED Version with Auto-On-Off selector Versions available with AgNi and AgSnO2 contact material Complies with EN 61095: 2009 Module with auxiliary contacts with “QuickMounting” coupling to the contactor(versions with 1NO + 1NC and 2NO) For railway applications; plastic materials compliant with fire and smoke regulations (EN 45545-2:2013) Available in the versions:-22.34.0.xxx.1xx0 (AgNi contact material, suitable for resistive, slightly inductive loads and motor loads)-22.34.0.xxx.4xx0 (AgSnO2 contact material, specific for lamp loads and loads with high peak currents) Applications Hotel: room energy enablingGarden: Night lightingPublic lighting: streets and car parksBathroom light controlOffice light controlPump control panels
FINDER MODULAR CONTACTOR 25 WITH 2 CONTACTS 223202304340 Modular contactor Type 22.32, 25 A, 2 contacts, with screw terminals, for mounting on 35mm rail (EN 60715). Features: Width 17.5 mm NO contact opening ≥ 3 mm, double break Coil and contacts for continuous duty Silent AC/DC coil (with protection varistor) Protective separation between coil and contacts (reinforced insulation) Standard version with mechanical indicator and LED Version with Auto-On-Off selector Versions available with AgNi and AgSnO2 contact material Complies with EN 61095: 2009 Module with auxiliary contacts with “QuickMounting” coupling to the contactor (versions with 1NO + 1NC and 2NO) Suitable for railway applications; plastic materials compliant with fire and smoke regulations (EN 45545-2:2013) Available in the versions:-22.32.0.xxx.1xx0 (AgNi contact material, suitable for resistive, weakly inductive loads and motor loads)-22.32.0.xxx.4xx0 (AgSnO2 contact material, specific for lamp loads and loads with high peak currents) Applications Hotel: room energy enablingGarden: Night lightingPublic lighting: streets and car parksBathroom light controlOffice light controlPump control panels
FINDER MODULAR PULSE RELAY 2 NO 16A 202282300000 Type 20.22 modular pulse relay with bipolar switch, for direct mounting on 35 mm rail (EN 60715). Features: One module width 17.4 mm Test button and mechanical indicator 7 sequences available AC or DC coil Identification card Possibility of connection with illuminated buttons using the adapter 026.00 Cadmium-free contacts Applications Shutter controlBedroom light controlLiving room light controlCorridor: light control (hotel, hospital, etc.)
Finder Digital wall thermostat 1T3190030000 Type 1T.31 is a digital wall thermostat and is available in the versions:– 1T.31.9.003.0000 white color– 1T.31.9.003.2000 black color Features: 2 operating modes: Day/Night Adjustable temperature (+5…+37)°C Battery power: 3 V DC (2 x 1.5 V DC AAA batteries) Device lock Functions: Antifreeze/Off/Summer/Winter Adjustable antifreeze (+2…+8)°C 1 output contact 5 A 250 V AC Selectable thermal differential (0.2 – 0.5)°C Applications Air conditioning / Heating Building automation
Finder Yesly roller shutter control actuator 13S28230B000 Type 13.S2 electronic multifunction relay with Bluetooth, 2 contacts, for YESLY system.Suitable for controlling electric shutters and curtains. Equipped with Bluetooth 4.2 Low Energy transmission protocol and 128-bit encrypted connection.Device programmable via App Finder TOOLBOX compatible with iOS and Android operating systems. It can be connected to wired buttons or BEYON and 013B9 type wireless buttons. Features: Flush mounting (e.g. round box 0 60 mm) For electric shutters and curtains 2 independent and programmable NO contacts 6 A – 230 V AC 2 inputs for wired buttons Transmission range: approximately 10 meters in a free field without obstacles the creation of customized scenarios; recalling a command through your favorite voice assistant. ApplicationsBathroom call with resetBathroom light controlBedroom light controlLiving room light controlOffice light control
FINDER ADJUSTABLE MOVEMENT DETECTOR FOR INDOORS 180182300000 Type 18.01 infrared motion detector for indoor installation – wall mounting. 1 NO 10 A. Features: Mains potential output contact Reduced size Equipped with twilight sensor and delay time Switch-off delay adjustment Can be used in any position for motion detection Wide detection angle Applications Hotel: enable room energyControl lights in offices, bathrooms, classroomsCorridor: control lights (hotels, hospitals, etc.)Control stair lights
FINDER DIMMER LIGHT (DIMMER) 100 W MOUNTING ON DAMAGE POLE 159182300000 The 15.91 type electronic dimmer allows installation as a false pole in a built-in box for domesticseries. It is characterized by the Leading edge regulation method, linear regulation and automatic recognition of the frequencyof the supply voltage. Other features: Maximum switchable power 100 W Two types of programming: with or without memory 230 V AC 50/60 Hz power supply with automatic frequency recognition Suitable for incandescent and halogen lamps Can be used in both 3 and 4 wire systems Soft switching on and off Two types of programming: with or without memory of the light intensity Thermal fuse protection Applications Kitchen light controlBedroom light controlLiving room light controlCorridor: light control (hotels, hospitals, etc.)
FINDER ELECTRONIC AND MODULAR MONOSTABLE PULSE RELAY 139182300000 The Type 13.91 electronic impulse relay is a device with long mechanical and electrical life, quieter than electromechanical relays, compatible with the most widespread civil systems. Features: Timing function: fixed time (10 minutes) Suitable for 3 and 4 wire systems, with automatic recognition Command pulse: continuous “Zero crossing” load switching Mounting as a false pole, compatible with the most widespread civil systems - e.g. BTicino: Axolute, Matix, Living and Magic, Gewiss: GW24, Vimar: Plana and Idea Cadmium-free contacts Applications Bathroom call with resetBathroom light controlBedroom light controlOffice light controlLiving room light control
Finder radio frequency actuator for Bliss 13218230S000 Type 13.21.8.230.S000 is a radio frequency remote actuator for the BLISS2 smart thermostat. This device can be integrated into the Bliss2 system and allows radio frequency management of contact switching, humidity control and the simplified creation of multi-zone systems without building work, thus guaranteeing considerable versatility of use. Product technical characteristics: Long range radio frequency transmission 868 MHz Multi-zone heating/cooling function Hygrostat function combined with the Bliss2 Thermostat Compatible with the BLISS2 smart thermostat. Applications Thermoregulation remote control
FINDER DAILY EMR TIME SWITCH 1NO 16 A 121182300000 The Type 12.11 time switch is a daily electromechanical switch, with 1 NO 16 A contact for mounting on a 35 mm rail (EN 60715). Features: Minimum programming interval: 15 min Width 17.66 mm Applications Air conditioning / HeatingStore windows, illuminated signsLighting for parksPublic lighting: streets and car parksLesson times bell control
FINDER DAILY EMR TIME SWITCH 1 EXCHANGE 16 A 120182300000 Electromechanical time switch Type 12.01, daily, with 1 NO contact 16 A, width 35.8 mm. Mounting on 35 mm rail (EN 60715). Same program for every day Features: Minimum programming interval: 30 min Applications Air conditioning / HeatingStore windows, illuminated signsLighting for parksPublic lighting: streets and car parksLesson times bell control
FINDER TWILIGHT RELAY DIN 17.5MM 1NO 16A 100LUX 113182300000 Type 11.31 twilight relay for turning on lamps based on the ambient brightness level, supplied with separate photosensitive element. Equipped with 1 NO 16 A contact, sensitivity adjustment from 1 to 100 lux, one module, width 17.5 mm. Low stand-by consumption, 24 V DC/AC power version available. Features: First 3 operating cycles of the relay without delay when switching on and off, in order to facilitate adjustment operations by the installer LED indicators SELV separation between power supply circuit and contacts Double insulation between power supply and photosensor Mounting on 35 mm rail (EN 60715) Cadmium-free contacts Cadmium-free photosensor element (IC photo diode) Applications Garden: Night lightingShop windows, illuminated signsLighting for parksPublic lighting: roads and car parks
