SIEMENS SIMATIC S7-1500 6ES75050KA000AB0 SIMATIC S7-1500, system power source PS 25W DC 24V, supplies the backplane bus of the S7-1500 with the operating voltage.  General information: Product type designation PS 25W 24VDCHardware version FS02Firmware version V1.0.0 Engineering with● STEP 7 TIA Portal configurable/integrated fromversionV12 / V12● STEP 7 configurable/integrated from version from V5.5 SP3 Supply voltageRated value (DC) 24 VPermissible range, lower limit (DC) 19.2 V; static 19.2 V, dynamic 18.5 VAllowable range, upper limit (DC) 28.8 V; static 28.8 V, dynamic 30.2 VReverse polarity protection YesShort circuit protection Yes Mains and voltage interruption buffering● Mains/voltage interruption buffering time 20 ms Input currentRated value at 24 V DC 1.3 A Output currentShort circuit protection Yes PowerSupply power in the backplane bus 25 W Power dissipatedPower dissipated at nominal conditions 6.2 W Alarms/diagnostics/status informationStatus display Yes Potential separationprimary/secondary Yes InsulationInsulation tested with DC 707 V (Type Test)EMC Immunity to impulse voltage disturbances (surge)● Immunity to disturbances on power supply conductorsaccording to IEC 61000-4-5Yes; ±1 kV (according to IEC 61000-4-5; 1995; Surge symm.), ±2 kV (according to IEC61000-4-5; 1995; Surge asymm.), does not require an external protection circuit Degree of protection and safety classIP protection degree IP20. Protection class of operational equipment III, with protective conductor Environmental conditions Altitude during operation, with reference to sea level.      

Read more less

SIEMENS COMMUNICATION PROCESSOR CP 1542SP-1 6GK75426UX000XE0 CP 1542SP-1 communications processor for connecting a SIMATIC S7-ET 200SP module to Industrial Ethernet; open IE communication (TCP/IP, ISO on TCP, UDP), PG/OP, S7 routing, IP broadcast/multicast, SNMPV1, DHCP, e-mail, IPV4/IPV6, time synchronization via NTP, access to the company's web server CPU, BusAdapter required. General information: Baud rateBaud rate● on interface 1 10 ... 100 Mbit/sinterfacesnumber of interfaces / according to Industrial Ethernet 1number of electrical connections● on interface 1 / second Industrial Ethernet 2establishment of electrical connection● on interface 1 / second Industrial Ethernet via ET 200SP BusAdapter (RJ45, FC, LC, SCRJ), integrated switch Supply voltage current absorbed, power dissipatedtype of voltage / of the supply voltage DCsupply voltage 24 Vsupply voltage 19.2 . .. 28.8 Vpower dissipated [W] 6 Wambient conditionsambient temperature● for vertical installation / during operation -30 ... +50 °C● with horizontal installation / during operation -30 ... +60 °C● during storage -40 ... +70 °C● during transport -40 ... +70 °C Relative humidity● at 25 °C / non-condensing / during operation / max. 95 %IP protection degree IP20 Constructive form, dimensions and weightswidth 60 mmheight 117 mmdepth 74 mmnet weight 0.18 kgtype of fastening● mounting on 35 mm DIN rail Yesproduct features, product functions, product components / genericnumber of units● per CPU / max. 2● note 2 CPs can be inserted for each CPU, simultaneous operation possiblewith BA Send and CM DPpower data / open communicationnumber of connections possible / for open communication● via T blocks / max. 32 volumes of data.

Read more less

SIEMENS COMMUNICATION MODULE CM 1542-1 6GK75421AX000XE0 CM 1542-1 communication module for connecting S7-1500 to PROFINET as IO controller or IO device: TCP/IP, ISO on TCP, UDP, S7 communication, IP broadcast multicast, SNMPV1, synchronization hourly via NTP, 2xRJ45 (10/100 Mbit). General information: Baud rateBaud rate● on interface 1 10 ... 100 Mbit/s Interfacesnumber of interfaces / according to Industrial Ethernet 1number of electrical connections● on interface 1 / according to Industrial Ethernet 2connection execution electrical● on interface 1 / according to Industrial Ethernet RJ45 port Supply voltage                                                        current absorbed, power dissipatedtype of voltage / of the supply voltage DCsupply voltage / 1 / from backplane bus 15 Vtolerance relative symmetrical / with DC● with 15 V 3 % Current consumption● from backplane bus / with DC / with 15 V / typ. 0.22 Apower loss [W] 3.3 Wambient conditionsambient temperature● for vertical installation / during operation 0 ... 40 °C● with horizontal installation / during operation 0 ... 60 °C● during storage -40 ... +70 °C● during transport -40 ... +70 °C Relative humidity● at 25 °C / non-condensing / during operation / max. 95 %IP protection class IP20design, dimensions and weightsmodule format Single-width S7-1500 compact modulewidth 35 mmheight 142 mmdepth 129 mmnet weight 0.4 kg Type of fastening● mounting on S7-1500 standard rail Yesproduct features, product functions, product components / genericnumber of units ● per CPU / max. 8● note dependent on CPU type  

Read more less

SIEMENS S7-1500, DI 32X24VDC HF 6ES75211BL000AB0 SIMATIC S7-1500, DI 32xDC 24V HF digital input module, 32 channels in groups of 16; of which 2 inputs can be used for counting; input delay 0.05..20ms input type 3 (IEC 61131); diagnostics; Process interrupt: front connector (screw terminals or push-in) to be ordered separately.  General informationProduct type designation DI 32x24VDC HFHardware version from FS04Firmware version V2.2.1● FW update possible Yes Product function● I&M data Yes; I&M0 ... I&M3● Isochronous operation Yes● Prioritized start Yes Engineering with● STEP 7 TIA Portal configurable/integrated from versionV13 SP1 / -● STEP 7 configurable/integrated from version V5.5 SP3 / -● PROFIBUS from GSD version/GSD revision V1.0 / V5.1● PROFINET from GSD version/GSD revision V2.3 / - Operating mode● DI Yes● Counter Yes● Oversampling No● MSI Yes Supply voltageRated value (DC) 24 VAllowable range, lower limit (DC) 19.2 VAllowable range, upper limit (DC) ) 28.8 VReverse polarity protection Yes Input currentCurrent consumption, max. 40mA; 20 mA each group with DC 24 V supply voltage PowerPower draw from backplane bus 1.1 WPower lossPower loss, typ. 4.2 WDigital inputs Number of inputs 32parameterizable digital inputs YesRead on m/p Read on PInput characteristic according to IEC 61131, Type 3 Yes Digital input functions, parameterizable● Gate start/stop Yes● Digital input freely usable Yes  

Read more less

SIEMENS SIMATIC S7- 1200F 6ES72141AF400XB0 SIMATIC S7-1200F, CPU 1214 FC, compact CPU, DC/DC/DC, onboard I/O: 14 DI DC 24 V; 10 DO DC 24V; 2 AI 0...10V DC, power supply: DC DC 20.4...28.8V, program memory / data memory 200 KB General information Product type designation CPU 1214FC DC/DC/DCFirmware version V4.6Engineering with● Programming package from STEP 7 V18 Supply voltageRated value (DC)● DC 24 V YesPermissible range, lower limit (DC) 20.4 VRange permitted, upper limit (DC) 28.8 VReverse polarity protection Yes Load voltage L+● Rated value (DC) 24 V● Permissible range, lower limit (DC) 20.4 V● Allowable range, upper limit (DC) 28.8 VInput currentCurrent consumption (nominal value) 500 mA; CPU onlyCurrent consumption, max. 1 500 mA; CPU with all expansion modulesInrush current, max. 12A; at 28.8 VI²t 0.5 A²·sOutput currentfor backplane bus (DC 5 V), max. 1 600 mA; max. 5 V DC for SM and CMTransducer supply24 V transducer supply● 24 V L+ minus 4 V DC min. Power dissipationPower dissipation, typ. 12 W MemoryWork memory● integrated 200 KBLoad memory● integrated 4 MB● insertable (SIMATIC Memory Card ), max. with SIMATIC Memory Card.

Read more less

SIEMENS SINAMICS G120 (DC 24 V-2A)   6SL32460BA221FA0 Control Unit CU250S-2 PN integrated PROFINET supports vector control simple positioner EPos with Extended Functions license 4 configurable DI/DO 6 DI (3 F-DI), 5 DI 3 DO (1 F-DO) 2 AI , 2 AO Safety Integrated STO, SBC, SS1 additional safety functions via "EXTENDED SAFETY" license SS encoder: D-CLiQ+HTL/TTL/SSI Resolver/HTL via terminal IP20 protection rating USB and SD/MMC interface. Electrical data Operating voltage via the Power Module  DC 24 VExternal power supply DC 20 ... 29 VCurrent consumption, max. 2.00 APower dissipated 12.00 W Communication PROFINET, EtherNet/IP communication Inputs / outputs Standard digital inputs Number 15Switching level: 0→1 11 VSwitching level: 1→0  5 VFail-safe digital inputs Number  (Using 2 × standard DI) Digital outputs As relay changeover contact Number  2Output (ohmic load) DC 30 V, 0.5 AAs normally open relay contact Output (ohmic load)  DC 30 V, 0.5 A Analog / digital inputs Number 2 (Differential input)Analog outputs Number 2 (Non-isolated output)  

Read more less

SIEMENS SITOP PSU8200 6EP13363BA10 SITOP PSU8200 20 A stabilized power supply input: AC 120 ... 230 V DC 110 ... 220 V output: DC 24 V/20 A *Ex approval no longer available* SITOP modular single-phase power supplies are technological power supplies for sophisticated solutions that offer maximum functionality for use in complex systems and machines. The wide-range input allows connection to every network in the world and guarantees great safety even in the presence of strong voltage fluctuations. The Power-Boost provides up to three times the rated current for a short time. And in the event of an overload you can choose between constant current and latching shutdown. The very high efficiency reduces energy consumption and heat generation in the control cabinet and the compact metal housing saves space. To further increase the availability of 24 V, SITOP modular power supplies can be combined with buffer, DC-USV, redundancy and selective modules. Entrance Form of the electrical network: Single-phase and two-phase AC or DC Supply voltage at AC min. rated value: 120 V Supply voltage at AC max. rated value: 230 V Supply voltage at AC initial value: 85 V Supply voltage supply with AC final value: 275 VSupply voltage with DC: 110 ... 220 VInput voltage with DC: 88 ... 350 V Input version wide-range input: YesOperating condition of backup in case of mains voltage failure: With Ue = 230 V Backup time at nominal value of the output current in case of mains voltage failure min. : 20 msOperating condition of backup for lack of mains voltage: With Ue = 230 VMains frequency 1 nominal value: 50 Hz Mains frequency 2 nominal value: 60 Hz Mains frequency: 47 ... 63 HzInput current at rated value of 120 V input voltage: 4.6 A Input current at rated value of 230 V input voltage: 2 .5 A Current limitation of the inrush current at 25 °C max.: 20 AI2t value max.: 5 A²·sProtection design: Yesdel mains cable: Magnetothermal switch recommended for single-phase operation: 10 Acharacteristic C; required for two-phase operation: circuit breaker with two-pole coupling or circuit breaker3RV2711-1HD10(UL 489) with 120 V or 3RV2711-1ED10 (UL 489) with 230 V

Read more less

SIEMENS SIMATIC NET SCALANCE XB208 (DC 24 V) 6GK52080BA002AB2 SCALANCE XB208 manageable Layer 2 IE Switch 8x 10/100 Mbit/s RJ45 ports 1x console port; Diagnostics LED IEC 62443-4-2 certified redundant voltage supply; temp. range 0°C ... +60°C; mounting on profile rail; Default PROFINET. General information product type designation SCALANCE XB208transmission rate 10 Mbit/s, 100 Mbit/snumber of ports / max. 8 interfaces / for communication / configuration max. with modular devicesnumber of electrical doors / max. 8interfaces / for communication / integr. number of electrical connections● for network components or terminal equipment 8; RJ45 Interfaces / others number of electrical connections● for control console 1● for management purposes 1● for power supply 1 execution of the electrical connection● for console control RJ11● for management purposes RJ45 Supply voltage, absorbed current, dissipated power  integral part of the product / connection for redundant voltage supply Yesvoltage type / 1 / of the supply voltage DC● supply voltage / 1 / nominal value 24 V● supply voltage / 1 / nominal value 19.2 ... 28.8 V● current consumption / 1 / max. 0.17 A● execution of the electrical connection / 1 / forvoltage supply6-pole terminal block● integral part of the product / 1 / protection on the power input Yes Standards, specifications, approvals standard● for FM FM3611: Class 1, Division 2, Group A, B, C, D / T4, CL.1, Zone 2, GP. IIC, T4,FM19US0167X● for interference emission EN 61000-6-4 (Class A)● for interference immunity EN 61000-6-2IT safety for industrial automation systems / according to IEC 62443-4-2:2019 YesMTBF 84 a reference code● according to IEC 81346-2:2009 KF● according to IEC 81346-2:2019 KFE Standards, specifications, approvals / CE certificate of suitability / CE marking Yes certificate of suitability / RoHS compliance Yes; Directive 2011/65/EU

Read more less

SIEMENS SIRIUS 3RV2 Circuit breaker 3RV20111DA10 Automatic circuit breaker size S00 for motor protection, CLASS 10 release A 2,2...3,2 A release N 42 A screw terminal standard operating power. General information product brand SIRIUSproduct designation Circuit breakerproduct design For motor protectionproduct type designation 3RV2   General technical data frame size of circuit breaker S00frame size of company-specific combinable contactor S00, S0product expansion auxiliary switch block Yes power loss [W] at rated current value● with AC in hot operating state 7.25 W● with AC in hot operating state per pole 2.4 Wvoltage insulation with pollution degree 3 with AC rated value 690 Vimpulse withstand voltage rated value 6 kVshock resistance according to IEC 60068-2-27 25g / 11 ms mechanical lifespan (operating cycles)● of the main contacts typ. 100 000● of auxiliary contacts typ. 100 000electrical lifespan (switching cycles) typ. 100 000type of explosion protection according to the ATEX Product Directive 2014/34/EU Ex II(2) GDcertificate of suitability according to the ATEX Product Directive 2014/34/EU DMT 02 ATEX F 001reference code according to IEC 81346-2:2009 QRoHS Directive (date) 10/01/2009    

Read more less

SIEMENS SIMATIC HMI 6AV21232DB030AX0 SIPLUS HMI KTP400 Basic Color PN -20...+60°C with Conformal Coating based on 6AV2123-2DB03-0AX0 . "4" TFT display, 65536 colours" PROFINET interface SIMATIC HMI Basic Panel 2nd Generation - the beauty of simplicity! The Basic Panels are designed for the economical implementation of simple visualization tasks in the vicinity of the machines. Their basic equipment and functionality, as well as a particularly attractive price, make them the perfect entry-level equipment for small machines and systems. Thus they are perfectly coordinated with the S7-1200 Basic Controllers SIMATIC. You can choose between widescreen displays with a diagonal of 4", 7", 9" or 12" available with combined key or touch operation and which already support gesture control. The innovative high-resolution luminaires with 64,000 colors can also be installed vertically and are particularly flexible with brightness dimmable up to 100%. A multiplicity of possibilities is offered by the innovative user interface with improved usability thanks to new graphics and new controls. The new USB interface allows the connection of a keyboard, mouse or barcode reader and supports simple archiving as well as saving and restoring all data directly from the panel to/from a USB stick. For particularly complex tasks in harsh environmental conditions, SIPLUS extreme equipment is the optimal solution. The Conformal Coating protects the inside of the Panel even with 100% relative humidity, condensation, active substances and harmful gases. General Information Product type designation: KTP400 Basic Display Display design: Widescreen TFT display, LED backlightScreen diagonal: 4.3 inDisplay width: 95 mmDisplay height: 53.9 mmNumber of colors : 65 536 Horizontal image resolution 480 pixelsVertical image resolution 272 pixelsMTBF of backlight (at 25 °C) 20 000 hBacklight dimmable Yes Control elements Number of function keys: 4Number of function keys with LED: 0Keys with LED: NoSystem keys: NoNumeric keypad: Yes; Onscreen KeyboardAlphanumeric keyboard: Yes; Onscreen KeyboardRunning as touchscreen: Yes; analog-resistive Supply voltage Type of supply voltage: DCRated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28 ,8 V Input current Current consumption (nominal value): 125 mACurrent pulse on insertion: I²t 0.2 A²·s

Read more less

SIEMENS SIMATIC DP 6ES71366DC000CA0 SIMATIC DP, electronics module ET 200SP, F-DQ 8X24VDC/0.5A PP, width 15mm, up to PL E (ISO 13849) up to SIL 3 (IEC 61508) With the SIMATIC ET 200SP, Siemens offers a distributed, multifunctional I/O system that can be easily put into service thanks to its space-saving design. It is approved for IP20 protection and designed for installation in a compact distribution box. The system ensures maximum flexibility, allowing modules to be replaced quickly and easily at any time thanks to Multi Hot Swapping. Furthermore, the SIMATIC ET 200SP offers you a wide range of communication channels, both diverse and fast. Thanks to the integration of the IM155-6MF MultiFieldbus interface module, you can always react flexibly and use the optimal protocol for your application, as this function supports different Ethernet protocols. Assembly and service are simplified by a uniform identification system, based on reference identification plates and color-coded pin assignment. Siemens ensures you future-proof systems with the integration of innovative and at the same time long-lasting automation products, in fact as industry experts you are already investing today in the technologies of tomorrow and thus redefining market standards. The continuous availability of data, the flexibility of the application cases and the versatile integration options ensure the excellent performance of the ET 200 products. The scalable and cost-optimised configuration of an ET 200SP station is ensured by the wide range of I/O modules. In addition to digital and analog input and output modules, fail-safe variants are also available for applications up to SIL 3 / PLe. This also applies to integrated motor starters, which are suitable for motors up to 5.5 kW. Energy meters for measuring and analyzing energy consumption, IO-Link master (V1.1.) as well as many other communication and technology modules allow you to adapt the system to every automation task. The accessories available for ET 200SP range from colored and non-coloured reference identification plates to marking labels for individual modules and ensure maximum visibility in the electrical panel. General Information Product type designation: F-DQ 8x24 VDC/0.5 A PP HFFirmware update possible: YesUsable BaseUnits: BU type A0Color code for coding plate a module specification colors: CC02 Supply Voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YesVoltage supply required according to NEC class 2: No Input Current Current consumption (nominal value): 75 mA; without loadCurrent consumption, max.: 21 mA; from the backplane bus Output voltage / header Rated value (DC): 24 V PowerPower draw from backplane bus: 70 mW Power dissipationPower dissipation, typ. 3 W

Read more less

SIEMENS SIMATIC ET 200SP 6ES71376AA010BA0 CM PTP communication module for RS-422, RS-485 and RS-232 serial link, Freeport, 3964 (R), USS, MODBUS RTU master, slave, max. 250 kbit/s, suitable for BU type A0, pack quantity: 1 piece SIMATIC ET 200SP is a scalable and highly flexible distributed I/O system. Thanks to its small overall dimensions it is particularly suitable for installation in small distribution boxes at machine level. The modules can be plugged directly into an ET 200SP CPU or connected via PROFINET or PROFIBUS to a central controller. SIMATIC ET 200SP can be expanded with up to 64 I/O modules, which can be inserted in any combination. The system offers a very wide range of units. Many modules are also available with different performance levels, which greatly improves scalability regarding functionality and price. In addition to modules with standard functionality (ST), modules with an extended set of functions and diagnostics (HF High Feature / HS High Speed) are also available. For price-sensitive applications, basic functionality (BA) modules are available. The advantage of the ET 200SP system is its ease of use, e.g. thanks to the free choice of connection technology to PROFINET via the BusAdapter, tool-free cabling with push-in technology, improved accessibility of the cabling with the new arrangement of the spring openers next to the respective cable openings and the specific diagnostic functions of channel. The possibility of replacing modules and terminal boxes during operation, the so-called "Hot Swapping", ensures the availability and productivity of the machine. The communication modules expand the communication capabilities of the ET 200SP with additional functions or additional interfaces, e.g. PtP, IO-Link or AS-i. General Information Product type designation: CM PtPFirmware update possible: YesUsable BaseUnits: BU type A0 Supply Voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VProtection from polarity inversion: Yes Input Current Current consumption (nominal value): 31 mACurrent consumption, max.: 35 mA Dissipated Power Power dissipation, typ. 0.7 W  

Read more less

SIEMENS SIMATIC ET 200SP 6ES71346GB000BA1 SIMATIC ET 200SP, Analog input module, AI 2xI 2-/4-Wire Standard, Quantity in packaging 1 piece suitable for BU type A0, A1, Color code CC05, Diagnostics module, 16 bit . General information Product type designation AI 2xI 2/4-wire STHardware version from FS04Firmware version● FW update possible YesUsable BaseUnits BU type A0 , A1Color code for module-specific color coding plate CC05 Supply voltage Rated value (DC) 24 VAllowable range, lower limit (DC) 19.2 VAllowable range, upper limit (DC) 28.8 VReverse polarity protection Yes Input current Current consumption, max. 45mA; without transducer power supply Power dissipated Power dissipation, typ. 1.1 W  

Read more less

SIEMENS SIMATIC S7-1200 6ES72231BH320XB0 SIMATIC S7-1200, digital I/O SM 1223, 8 DI/8 DO, 8 DI DC 24V, Sink/Source, 8 DO, Transistor 0.5A SIMATIC S7-1200 Basic Controller - Flexibility guaranteed by various communication options. With the input/output modules you can customize the configuration of your SIMATIC S7-1200 (except CPU 1211C) according to your specific needs. Furthermore, a series of digital or analogue input and output modules and mixed modules are available, also in fail-safe variants. With these comprehensive construction options, you can save space in the control cabinet and optimize hardware costs. General Information Product type designation: SM 1223, DI 8x24 VDC, DQ 8x24 VDC Supply Voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 20.4 VAllowable range, upper limit (DC): 28.8 V Input current from backplane bus DC 5 V, max. 145 mADigital inputs from load voltage L+ (without load), max. 4 mA; for channel Dissipated Power Power dissipation, typ. 2.5 W

Read more less

SIEMENS SIMATIC ET 200SP 6ES71936BP200DA0 SIMATIC ET 200SP, Basic unit BU15-P16+A10+2D, BU type A0, Push-in terminals, with 10 aux. terminals, new load group, WxH: 15 mmx141 mm. General information Product type designation BU type A0Hardware version From FS07 Supply voltage Rated value (DC) 24 VExternal protection of power cables Yes; DC 24 V / 10 A circuit breaker with tripping characteristic type B or C Current capacity for busbar P1 and busbar P2, max. 10 Afor AUX bus, max. 10 Afor process terminals, max. 2 A Hardware configuration Formation of potential groups● New potential group Yes● Potential group continued from the left No Slot● Number of slots 1; Type A0 Potential separation between potential groups Yes Isolation Insulation tested with DC 707 V (Type Test)  

Read more less

SIEMENS SIMATIC DP, CPU 1510SP-1 PN for ET 200SP  6ES75101DJ010AB0  SIMATIC DP, CPU 1510SP-1 PN for ET 200SP, central processing unit with working memory of 100 KB for the program and 750 KB for data, 1st interface: PROFINET IRTwith 3 Port Switch , Bit performance of 72 NS, SIMATIC Memory Card required,bus adapter required for port 1 and 2 General Information: Product type designation: CPU 1510SP-1 PN Supply Voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YesMains and voltage interruption bufferingMains/voltage interruption buffering time: 5 ms Input Current Current consumption (nominal value): 0.6 ACurrent consumption, max.: 0.9 AInrush current, max.: 4.7 A; Nominal valueI²t: 0.14 A²·s Power Supply power in the backplane bus: 8.75 W Dissipated Power Power dissipation, typ.: 5.6 W Memory Number of slots for SIMATIC Memory Card: 1SIMATIC Memory Card required: YesIntegrated work memory (for program): 100 kbyteIntegrated work memory (for data) : 750 KBInsertable load memory (SIMATIC Memory Card), max.: 32 GB Maintenance-free backup: Yes

Read more less

SIEMENS SIMATIC ANALOG INPUT SM 1231, 4AIS7-1200 6ES72314HD320XB0 Analog input module, SM 1231, 4 AI, +/-10 V, +/-5 V, +/-2.5V, or 0-20mA/4-20mA, 12 bits + sign (13 Bit ADC) SIMATIC S7-1200 Basic Controller - Flexibility guaranteed by various communication options. With the input/output modules you can customize the configuration of your SIMATIC S7-1200 (except CPU 1211C) according to your specific needs. Furthermore, a series of digital or analog input and output modules and mixed modules are available, also in fail-safe variants. With these comprehensive construction options, you can save space in the control cabinet and optimize hardware costs. General Information Product type designation: SM 1231, AI 4x 13 bit Supply Voltage Rated value (DC): 24 V Input Current Current consumption, typ.: 45 mA from 5 V DC backplane bus, typ.: 80 mA Analog Inputs Number of analog inputs: 4; Current or voltage differential inputs Permitted input voltage for voltage input(destruction limit), max.: 35 VPermitted input current for current input (destruction limit), max.: 40 mA Cycle time (all channels), max.: 625 μs

Read more less

SIEMENS SIMATIC S7-300 6ES73221BL000AA0 Digital output module SM 322, electrically isolated, 32DA, DC 24V, 0.5A, 1 x 40-pole, total current 4A/group (16A/Baugruppe). Supply voltage Load voltage L+Rated value (DC): 24 VAllowable range, lower limit (DC): 20.4 VAllowable range, upper limit (DC): 28.8 V Input current from load voltage L+ (without load), max.: 160 mAfrom backplane bus DC 5 V, max.: 110 mA Power dissipated Power dissipation, typ.: 6.6 W Digital Outputs Number of outputs: 32Short circuit protection: Yes; electronicTripping threshold, typ.: 1 ALimitation of the inductive opening extra voltage on L+: (-53 V)Control of a digital input: Yes

Read more less

SIEMENS SIMATIC ET 200SP 6ES71316BH010BA0 Digital input module, DI 16x 24V DC Standard, Input type 3 (IEC 61131), Sink Input, (PNP, read on P). Packaging unit: 1 piece suitable for BU type A0, Color code CC00, Input delay 0.05..20ms; Diagnostics module for: wire break, supply voltage General Information: Product type designation: DI 16x24VDC STHardware version: From FS02Firmware version: V0.0Possible FW update: NoUsable BaseUnits: BU type A0Color code for module-specific color coding label: CC00 Supply Voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Input Current Current consumption, max:. 90 mA

Read more less

SIEMENS SENTRON PAC3220 LCD 96x96 mm Power Monitoring 7KM3220-0BA01-1DA0 Device built-in device in control panel for measuring electrical quantities protocol: Modbus TCP with graphic display Ue nom: 690/400 V 45 ... 65 Hz Ie nom: X/1A or X/5A AC auxiliary energy: AC/ DC 100 ... 250 V +-10 % connection with screw terminals Measures Measurement method for voltage measurement: TRMSMeasurement method for current measurement: TRMSType of measurement value acquisition: without spacesVoltage curve shape: sinusoidal or distortedMeasurable network frequencyInitial value: 45 HzFinal value: 65 HzOperating mode for measuring value detection automatic mains frequency detection: YesOperating mode for measuring value detection50Hz Fixing: No60Hz Fixing: No Supply voltage Power supply voltage execution: wide voltage power supplyPower supply voltage type: AC/DCSupply voltage with AC: 100 ... 250 VSupply voltage with DC: 100 ... 250 V Communication Min. transmission speed: 10 000 kbit/sMax. transmission speed: 100 000 kbit/sNumber of interfaces according to Fast Ethernet: 2Electrical connection of the Fast Ethernet interface: 2 x RJ45Protocol on Ethernet interface is supported: MODBUS TCP

Read more less

SIEMENS SIMATIC ET 200SP 6ES71346GF000AA1 Analog input module, AI 8XI 2-/4-Wire Basic, suitable for BU type A0, A1, Color code CC01, Diagnostic module, 16 bit. General information Product type designation AI 8xI 2-/4-wire BAHardware version from FS04Firmware version● FW update possible YesUsable BaseUnits BU type A0, A1Color code for module-specific color coding plate CC01 Supply voltage Rated value (DC) 24 VAllowable range, lower limit (DC) 19.2 VAllowable range, upper limit (DC) 28.8 VReverse polarity protection Yes Input current Current consumption, max. 25mA; without transducer power supply Power dissipated Power dissipation, typ. 0.7W; without transducer power supply voltage  

Read more less

SIEMENS SITOP PSU300S 40A  SIEMENS SITOP PSU300S STABILIZED POWER SUPPLY  6EP1437-2BA20 *Ex approval no longer available* The three-phase SITOP smart are the universal and high-performance standard power supplies for machine and plant construction. Despite their compact design, they have an excellent overload characteristic: Thanks to the 150% Extra Power, loads with high current consumption can be switched on without any problem and the continuous overload capability of 120% offers power reserves for possible expansions. The high efficiency guarantees low energy consumption and reduced heat generation in the electrical panel. To further increase the availability of 24 V, SITOP smart power supplies can be combined with buffer, DC-USV, redundancy and selective modules. Regardless of the industry and requirements, Siemens offers reliable and efficient power supplies for every installation. Type of supply voltage: ACOutput voltage 1: 24...24 VMax. Output current 1: 40 AAdjustable output voltage: yesOutput voltage rating 1: 24 VOutput current rating 1: 40 AShort-proof circuit: yesRated AC supply voltage 50 Hz: 400...400 VNominal AC supply voltage 60 Hz: 500...500 VStabilised output voltage: yesPower consumption: 89 VAOutput power: 960 WStabilised: yesType of electrical connection: Screw connectionPossibilities rail mounting: yesWall mountable: noSuitable for modular mounting: yesRecessing width: 145 mmRecessing height: 225 mmDirect mounting possible: noWidth: 145 mmHeight: 145 mmDepth: 150 mmProtection degree (IP): IP20

Read more less

SIEMENS SIMATIC DP (DC 24 V - 21 MA) 6ES71366BA000CA0 Electronics module for ET 200SP, F-DI 8x 24VDC HF, 15mm width, up to PL E (ISO 13849-1)/ SIL3 (IEC 61508). General information Product type designation F-DI 8x24VDC HFUsable BaseUnits BU type A0 Product function● I&M data Yes; I&M0 ... I&M3 Supply voltage Rated value (DC) 24 VAllowable range, lower limit (DC) 20.4 VAllowable range, upper limit (DC) 28.8 VReverse polarity protection YesVoltage supply required according to NEC class 2 No Input current Current consumption (nominal value) 75 mA; without loadCurrent consumption, max. 21 mA; from the backplane bus Power Power draw from backplane bus 70 mW Power dissipated Power dissipation, typ. 4 W  

Read more less

SIEMENS SIMATIC ET 200SP, TM count 1x 24V counting unit, 1 channel for 24 V incremental transducer or pulse generator, 3 DI, 2 DQ, suitable for BU type A0 6ES7138-6AA01-0BA0 General information Product type designation: TM Count 1x24VFirmware version V2.0FW update possible: YesUsable BaseUnits: BU type A0Color code for coding plate a color specification ofmodule: CC00 Supply voltage Rated value (DC): 24 VLoad voltage L+Rated value (DC): 24 VPermitted range, lower limit (DC): 19.2 VPermitted range , upper limit (DC): 28.8 VReverse polarity protection: Yes Power dissipated Power dissipation, typ. 1 W

Read more less