Siemens 3RH29111DA20auxiliary switch block, lateral, 2 NO, left: 43/44, 53/54, right: 23/24, 33/34, power path: 1 NO, 1 NO, screw terminals, for 3RT2 contactors.1 SIRIUS 3RH29 auxiliary contact for expanding the auxiliary contacts in the control circuit. The 3RH29 side-mountable auxiliary switch blocks can be mounted on the 3RT2 contactors without tools regardless of the frame size .The 3RH19/3RH29 auxiliary switch blocks are available as variants for front or side mounting, with up to four NO contacts with instantaneous switching or up to two leading NO and NC contacts. The auxiliary switch blocks can be designed with force-guided contact elements in 3RH auxiliary contactors or also as mirror contacts in 3RT power contactors. They are always available with screw terminals and spring terminals. Simple, efficient, always up-to-date - the SIRIUS modular system.

Read more less

Siemens 6ES75211BH100AA0SIMATIC S7-1500, digital input module, DI 16xDC 24V BA, 16 channels in groups of 16, input delay typ. 3.2 ms, input type 3 (IEC 61131) scope of delivery incl. push-in front connector SIMATIC ET 200MP is a modular, scalable I/O system for universal use in IP20 and offers the same system advantages as the S7-1500. It enables minimum bus cycle times and very fast response times even for large quantity structures. The distributed I/O system is particularly easy to install, wire and commission. Thanks to the scalable structure, the peripheral station can be customized exactly to the needs on site. The wide range of input/output modules ensures the scalable configuration of an ET 200MP station. Numerous digital and analog input and output modules are available. This ensures the possibility of universal use of the system.

Read more less

Siemens 3RU21161GB0overload relay 4.5...6.3 A thermal for motor protection frame size S00, CLASS 10 mounting on contactor main circuit: screw terminals auxiliary circuit: screw terminals manual-automatic reset screw SIRIUS 3RU2 thermal overload relay for current-dependent protection of loads with normal starting against excessive overheating caused by overload or phase failure.\nThis construction series is particularly flexible and economical. International approvals (e.g. IEC and UL/CSA) and versions for applications in areas at risk of explosion (ATEX or IEC Ex) are obviously available.\nSupplied with different adjustment ranges of the overload release. They are available with screw or spring-loaded terminals for quick, maintenance-free and vibration-resistant connection as well as for separate mounting.\nThe accessories are uniformly suitable for all frame sizes from S00 to S3.\nSimple, efficient, always up-to-date - the SIRIUS. modular system

Read more less

Siemens 3RH29111XA220MA0auxiliary switch block on the front side, 2 NO + 2 NC power path 1 NO, 1 NC, 1 NC, 1 NO for 3RH2 and 3RT2 screw terminal 53/54 , 61/62, 71/72, 83/84 SIRIUS 3RH29 auxiliary contact for expanding the auxiliary contacts in the control circuit.\nThe 3RH29 front auxiliary switch blocks can be mounted without tools on the 3RT2 contactors and 3RH2 auxiliary contactors.\nThe 3RH19/3RH29 auxiliary contact blocks are available as variants for front or side mounting, with up to four NO contacts with instantaneous switching or up to two leading NO and NC contacts. The auxiliary switch blocks can be designed with force-guided contact elements in 3RH auxiliary contactors or also as mirror contacts in 3RT power contactors. They are always available with screw terminals and spring terminals.\nSimple, efficient, always up-to-date - the SIRIUS modular system.

Read more less

Siemens 3RA29232AA1wiring kit for electrical and mechanical screw connection incl. mechanical interlock for reversing starter size S0 Simple, efficient, always up-to-date - the SIRIUS modular system.

Read more less

Siemens 3RT29261BB00surge arrester, varistor, AC 24 ... 48 V, DC 24 ... 70 V, for motor contactors frame size S0 The surge arrester can be inserted widely easily into the special compartment in the contactor and without affecting the external dimensions.\nSimple, efficient, always up-to-date - the SIRIUS modular system.

Read more less

Siemens 3RA29122Hlateral interlock mechanical connecting element for contactor 3RT2.1 consists of 2 contactors and 1 anchor for 1 combination Simple, efficient, always up-to-date - the SIRIUS modular system.

Read more less

Siemens 6SL32101KE238AF1SINAMICS G120C rated power: 18.5kW with 150% overload for 3 sec. 3AC380-480V+10/-20% 47-63Hz integrated class A filter I/O interface: 6DI, 2DO, 1AI, 1AO Integrated Safe-Torque-Off integrated fieldbus: PROFINET PN protection degree IP20/UL Open type size : FSC 295x 140x 225.4 (HxWxD) 24V external SINAMICS G120C frequency converter. Versatile. User-friendly. Compact. For the most diverse applications, such as conveyor belts, mixers, pumps, fans and compressors. With the integrated safety function Safe Torque Off (STO), STO via terminals/PROFIsafe you can do without other external components. Commissioning and operation is done quickly and easily with the PC via USB or via a Basic Operator Panel or an Intelligent Operator Panel or wirelessly via the SINAMICS G120 Smart Access Module. The network connection of the drives takes place via standard fieldbus systems (PROFINET, PROFIBUS) and to make commissioning easier and more intuitive there is a slot for memory cards as standard. To increase energy efficiency, the converter is equipped with precise, energy-optimised SLVC vector control and also features automatic flux reduction. The SINAMICS G120C covers the three-phase 3AC voltage range 380 V ... 480 V and is available in seven frame sizes in capacities from 0.55 kW to 132 kW. The SINAMICS G120C frequency converter adapts itself to specific user requirements with various options. These options include local or mobile operator panels, connecting cables, mains filters, braking resistors, mains reactors and other accessories. Variable speed devices are an integral part of the Totally Integrated Automation (TIA) concept and interface optimally with e.g. with controllers SIMATIC. The SINAMICS G120C universal converter is the successor to the MICROMASTER 420 frequency converter. SINAMICS - the drive for me.

Read more less

Siemens 6ES75231BL000AA0SIMATIC S7-1500 digital input and output module, DI16x 24VDC BA, 16 channels in groups of 16, input delay typ. 3.2 ms input type 3 (IEC 61131), DQ16XDC 24V/0.5A BA 16 channels in groups of 8 4A per group the unit supports the safe disconnection of load groups up to SILCL1 according to EN 62061:2005 + A2:2015, and category 2 / PL c according to EN ISO 13849-1:2015. supply incl. push-in front connector SIMATIC ET 200MP is a modular, scalable I/O system for universal use in IP20 and offers the same system advantages as the S7-1500. It enables minimum bus cycle times and very fast response times even for large quantity structures. The distributed I/O system is particularly easy to install, wire and commission. Thanks to the scalable structure, the peripheral station can be customized exactly to the needs on site. The wide range of input/output modules ensures the scalable configuration of an ET 200MP station. Numerous digital and analog input and output modules are available. This ensures the possibility of universal use of the system.

Read more less

Siemens 6ES79720AA020XA0SIMATIC DP, Repeater RS-485 for connecting PROFIBUS/MPI bus systems with max. 31 knots max. transmission speed 12 Mbit/s, protection class IP20 improved user handling Accessories for SIMATIC DP

Read more less

Siemens 6ES72324HB320XB0SIMATIC S7-1200, analog output module, SM 1232, 2 AO, +/-10 V, 14 bit resolution, or 0-20mA/4-20mA, 13 bit resolution SIMATIC S7-1200 Basic Controller - Flexibility guaranteed by various communication options. With the input/output modules you can customize the configuration of your SIMATIC S7-1200 (except CPU 1211C) according to your specific needs. Furthermore, a series of digital or analog input and output modules and mixed modules are available, also in fail-safe variants. With these comprehensive construction options, you can save space in the control cabinet and optimize hardware costs.

Read more less

Siemens 3RU21364HB0overload relay 40... 50 A thermal for motor protection frame size S2, CLASS 10 mounting on contactor main circuit: screw terminals auxiliary circuit: screw terminals manual reset- SIRIUS 3RU2 automatic thermal overload relay for current-dependent protection of loads with normal starting against excessive overheating caused by overload or phase failure.\nThis design series is particularly flexible and economical. International approvals (e.g. IEC and UL/CSA) and versions for applications in areas at risk of explosion (ATEX or IEC Ex) are obviously available.\nSupplied with different adjustment ranges of the overload release. They are available with screw or spring-loaded terminals for quick, maintenance-free and vibration-resistant connection as well as for separate mounting.\nThe accessories are uniformly suitable for all frame sizes from S00 to S3.\nSimple, efficient, always up-to-date - the SIRIUS. modular system

Read more less

Siemens 6SL32105BE275CV0SINAMICS V20 3AC 380 ... 480 V - 15/+ 10 % 47-6 rated power 7.5 kW with 150 % overload for 60 sec. integrated filter C3 I/O interface: 4 DI, 2 DO, 2 AI, 1 AO field bus: USS/MODBUS RTU with built-in BOP protection degree IP20/UL open type dimensions: large. built D 240x207x173 (WxHxD)

Read more less

Siemens 6ES75325HD000AB0SIMATIC S7-1500, AQ 4xU/I ST analog output module, 16 bit resolution, accuracy 0.3%. 4 channels in groups of 4, substitute value diagnostics the unit supports the safe disconnection of load groups up to SILCL1 according to EN 62061:2005 + A2:2015, and category 2 / PL c according to EN ISO 13849-1:2015. delivery including a power supply element, shield bracket and shield clamp: front connector (screw terminals or push-in) to be ordered separately SIMATIC ET 200MP is a modular, scalable I/O system for universal use in IP20 and offers the same system advantages as the S7-1500. It enables minimum bus cycle times and very fast response times even for large quantity structures. The distributed I/O system is particularly easy to install, wire and commission. Thanks to the scalable structure, the peripheral station can be customized exactly to the needs on site. The wide range of input/output modules ensures the scalable configuration of an ET 200MP station. Numerous digital and analog input and output modules are available. This ensures the possibility of universal use of the system.

Read more less

Siemens 6ES75325NB000AB0SIMATIC S7-1500, analog output module AQ 2x U/I ST, resolution 16 bit, accuracy 0.3%. 2 channels in groups of 2 diagnostics substitute value the unit supports the safe disconnection of load groups up to SILCL1 according to EN 62061:2005 + A2:2015, and category 2 / PL c according to EN ISO 13849-1:2015. delivery including a push-in front connector, power supply element, shield bracket and shield clamp SIMATIC ET 200MP is a modular, scalable I/O system for universal use in IP20 and offers the same system advantages as the S7- 1500. It enables minimum bus cycle times and very fast response times even for large quantity structures. The distributed I/O system is particularly easy to install, wire and commission. Thanks to the scalable structure, the peripheral station can be customized exactly to the needs on site. The wide range of input/output modules ensures the scalable configuration of an ET 200MP station. Numerous digital and analog input and output modules are available. This ensures the possibility of universal use of the system.

Read more less

Siemens 6ED10551MM000BA2LOGO! AM2 AQ expansion module, SV: DC 24V, 2 AA, 0-10 V, 0/4-20mA for LOGO! 8 The LOGO! expansion modules allow you to create a LOGO! very personalized. A LOGO! basic device 8 can be expanded up to max. 24 digital inputs, 20 digital outputs, 8 analog inputs and 8 analog outputs. For this purpose, ten different expansion modules are available which allow the addition of digital or analog inputs and outputs with different input voltages.

Read more less

Siemens 3RH19211CA10front-side auxiliary switch block, 1 NO, screw terminals, for 3RT1 contactors SIRIUS 3RH19 auxiliary contact for expanding the auxiliary contacts in the control circuit.\nThis block The 3RH19 auxiliary contact block can be mounted without tools on 3RT1 contactors and 3RH1 auxiliary contactors of frame sizes S0 to S12. The 3RH19/3RH29 auxiliary switch blocks are available as variants for front or side mounting with up to four contacts NO with instantaneous switching or up to two early NO and NC contacts. The auxiliary switch blocks can be designed with force-guided contact elements in 3RH auxiliary contactors or also as mirror contacts in 3RT power contactors. They are always available with screw terminals and spring terminals.\nSimple, efficient, always up-to-date - the SIRIUS modular system.

Read more less

Siemens 6ES71936BP200BB1SIMATIC ET 200SP, Basic unit BU20-P12+A0+4B, BU type B1, Packaging unit: 1 piece Push-in terminals, without aux. terminals, bridged to the left, WxH: 20 mmx117 mm SIMATIC ET 200SP is a scalable and highly flexible distributed I/O system. Thanks to its small overall dimensions it is particularly suitable for installation in small distribution boxes at machine level. The modules can be plugged directly into an ET 200SP CPU or connected via PROFINET or PROFIBUS to a central controller. SIMATIC ET 200SP can be expanded with up to 64 I/O modules, which can be inserted in any combination. The system offers a very wide range of units. Many modules are also available with different performance levels, which greatly improves scalability regarding functionality and price. In addition to modules with standard functionality (ST), modules with an expanded function set and diagnostics (HF High Feature / HS High Speed) are also available. For price-sensitive applications, basic functionality (BA) modules are available. The advantage of the ET 200SP system is its ease of use, e.g. thanks to the free choice of connection technology to PROFINET via the BusAdapter, tool-free cabling with push-in technology, improved accessibility of the cabling with the new arrangement of the spring openers next to the respective cable openings and specific diagnostic functions of channel. The possibility of replacing modules and terminal boxes during operation, the so-called Hot Swapping, ensures the availability and productivity of the machine. The scalable and cost-optimised configuration of an ET 200SP station is ensured by the wide range of I/O modules. In addition to digital and analog input and output modules, fail-safe variants are also available for applications up to SIL 3 / PLe. This also applies to integrated motor starters, which are suitable for motors up to 5.5 kW. Energy meters for measuring and analyzing energy consumption, IO-Link master (V1.1.) as well as many other communication and technology modules enable the system to be adapted to every automation task.

Read more less

Siemens 6ES79548LL030AA0SIMATIC S7, Memory Card for S7-1x00 CPU, 3, 3V Flash, 256 MB SIMATIC S7-1200 Basic Controller - flexible thanks to multiple communication options and SIMATIC S7-1500 Advanced Controller - the fastest Siemens controller for automation. For the SIMATIC S7-1200/S7-1500 family, SIMATIC Memory Cards are offered as optional or necessary accessories in different sizes.

Read more less

Siemens 3RU21264BB0overload relay 14...20 A thermal for motor protection frame size S0, CLASS 10 mounting on contactor main circuit: screw terminals auxiliary circuit: screw terminals manual reset- automatic thermal overload relay SIRIUS3RU2 for current-dependent protection of loads with normal starting against excessive overheating caused by overload or phase failure.\nThis construction series is particularly flexible and economical. International approvals (e.g. IEC and UL/CSA) and versions for applications in areas at risk of explosion (ATEX or IEC Ex) are obviously available.\nSupplied with different adjustment ranges of the overload release. They are available with screw or spring-loaded terminals for quick, maintenance-free and vibration-resistant connection as well as for separate mounting.\nThe accessories are uniformly suitable for all frame sizes from S00 to S3.\nSimple, efficient, always up-to-date - the SIRIUS. modular system

Read more less

Siemens 6ES72221BD300XB0SIMATIC S7-1200, digital output module SB 1222, 4DQ, DC 24V 200kHz SIMATIC S7-1200 Basic Controller - Flexibility guaranteed by various communication options. If you need to expand your SIMATIC S7-1200 CPU with only a few inputs or outputs, Signal Boards are a valid alternative to input and output modules. The Signal Boards are inserted directly on the front of the controller (also possible with CPU 1211C) and are available as analogue or digital inputs and outputs and mixed modules. A Communication Board with RS 485 interface is also available. The Signal Boards also allow subsequent expansion of the configuration without requiring additional space in the control cabinet.

Read more less

Siemens 3RA29211BA00connection module for electrical and mechanical screw connection for 3RV2.1/3RV2.2-3RT2.2 DC control or 3RW3 soft starter or 3RF34 solid state contactor Simple, efficient, always up-to-date - the SIRIUS. modular system

Read more less

Siemens 6ES71356FB000BA1 SIMATIC ET 200SP, Analog output module, AQ 2xU Standard, Quantity in packaging 1 piece suitable for BU type A0, A1, Color code CC00, Diagnostics module, 16 bit SIMATIC ET 200SP is a highly scalable and highly distributed distributed I/O system flexible. Thanks to its small overall dimensions it is particularly suitable for installation in small distribution boxes at machine level. The modules can be plugged directly into an ET 200SP CPU or connected via PROFINET or PROFIBUS to a central controller. SIMATIC ET 200SP can be expanded with up to 64 I/O modules, which can be inserted in any combination. The system offers a very wide range of units. Many modules are also available with different performance levels, which greatly improves scalability regarding functionality and price. In addition to modules with standard functionality (ST), modules with an expanded function set and diagnostics (HF High Feature / HS High Speed) are also available. For price-sensitive applications, basic functionality (BA) modules are available. The advantage of the ET 200SP system is its ease of use, e.g. thanks to the free choice of connection technology to PROFINET via the BusAdapter, tool-free cabling with push-in technology, improved accessibility of the cabling with the new arrangement of the spring releases next to the respective openings for the conductors and specific diagnostic functions of channel. The possibility of replacing modules and terminal boxes during operation, the so-called Hot Swapping, ensures the availability and productivity of the machine. The scalable and cost-optimised configuration of an ET 200SP station is ensured by the wide range of I/O modules. In addition to digital and analog input and output modules, fail-safe variants are also available for applications up to SIL 3 / PLe. This also applies to integrated motor starters, which are suitable for motors up to 5.5 kW. Energy meters for measuring and analyzing energy consumption, IO-Link master (V1.1.) as well as many other communication and technology modules allow the system to be adapted to every automation task. The accessories available for ET 200SP range from colored and non-coloured reference identification plates to marking labels for the individual modules and ensure maximum visibility in the electrical panel.

Read more less

Siemens 6SL32105FE120UF0SINAMICS V90, with PROFINET input voltage: 380-480 V 3 A - 15 %/+ 10 % 9.8 A 45-66 Hz output voltage: - 0 input 7.8 A 0-330 Hz motor: 2.0/2.5 kW degree of protection: IP20 size B: 100x180x220 (WxHxD) SINAMICS V90 servo converter - the servo drive system with optimum performance and user-friendliness for a variety of control tasks motion control, particularly in relation to dynamic motion and machining. The SINAMICS V90 servo converter is designed for connecting the SIMOTICS S-1FL6 servo motor, with which it forms a drive system with an excellent price/performance ratio. This system is characterized by reliable operation, optimal performance and maximum ease of use. With the SIMATIC controller you get an efficient team in the TIA Portal. Depending on the version, you can download the free SINAMICS V-ASSISTANT commissioning tool for quick and easy commissioning. The SINAMICS V90 servo converter is suitable for operation on three-phase networks and covers, with four frame sizes, a power range of 0.4 kW ... 7.0 kW and a voltage range of 380 V ... 480 V. The system can be easily integrated via PTI, PROFINET, USS and Modbus RTU. The SINAMICS V90 servo converter adapts with different options, e.g. connection cables, mains filters, connectors and other accessories, to the specific needs of the user. SINAMICS - the drive for me.

Read more less