Siemens 3RT29161LM00surge arrester, interference suppression diode with LED, 24....70 V DC, for 3RT2.1 contactors and 3RH2 contactor relays Simple, efficient, always up-to-date - the modular system SIRIUS.

Read more less

Siemens 6GK15710BA000AA0USB PC adapter A2 USB adapter (USB V2.0) for connecting a PG/PC or notebook to SIMATIC S7 via PROFIBUS or MPI including 5m USB cable, cable MPI 0.3m usable in Windows XP/Vista/Windows 7 32/64 bit and higher

Read more less

Siemens 6ES75221BH010AB0SIMATIC S7-1500, digital output module DQ 16xDC 24V/0.5A HF 16 channels in groups of 8 4A for each group single channel diagnostics substitute value: counter of operating cycles for the connected actuators. The unit supports the safe disconnection of load groups up to SILCL2 according to EN 62061:2005 + A2:2015, and category 3 / PL d according to EN ISO 13849-1:2015. front connector (screw terminals or push-in) to be ordered separately SIMATIC ET 200MP is a modular, scalable I/O system for universal use in IP20 and offers the same system advantages as the S7-1500. It enables minimum bus cycle times and very fast response times even for large quantity structures. The distributed I/O system is particularly easy to install, wire and commission. Thanks to the scalable structure, the peripheral station can be customized exactly to the needs on site. The wide range of input/output modules ensures the scalable configuration of an ET 200MP station. Numerous digital and analog input and output modules are available. This ensures the possibility of universal use of the system.

Read more less

Siemens 3RA19211DA00electrical and mechanical connection module for 3RV2.1/3RV2.2 and 3RT2.1 AC and DC control (single package) Simple, efficient, always up-to-date - the modular system SIRIUS.

Read more less

Siemens 6ES75221BL100AA0SIMATIC S7-1500, digital output module, DQ32xDC 24V/0.5A BA, 32 channels in groups of 8, 4A per group the module supports shutdown in load group safety up to SILCL2 according to EN 62061:2005 + A2:2015, and category 3 / PL d according to EN ISO 13849-1:2015. supply incl. push-in front connector SIMATIC ET 200MP is a modular, scalable I/O system for universal use in IP20 and offers the same system advantages as the S7-1500. It enables minimum bus cycle times and very fast response times even for large quantity structures. The distributed I/O system is particularly easy to install, wire and commission. Thanks to the scalable structure, the peripheral station can be customized exactly to the needs on site. The wide range of input/output modules ensures the scalable configuration of an ET 200MP station. Numerous digital and analog input and output modules are available. This ensures the possibility of universal use of the system.

Read more less

Siemens 6ES79720BA120XA0SIMATIC DP, connector for PROFIBUS up to 12 Mbit/s 90° cable exit, 15.8x 64x 35.6mm (WxHxD), with terminating resistor with function sectioning, without PG socket Zubehör für SIMATIC DP

Read more less

Siemens 6ES79720BA520XA0SIMATIC DP, connector for PROFIBUS up to 12 Mbit/s 90° cable exit, Fast-Connect insulation displacement technology, without PG socket 15.8x 59x 35 ,6mm (WxHxD) Zubehör für SIMATIC DP

Read more less

Siemens 3RM10071AA04direct starter, 3RM1, 500 V, 0.55 ... 3 kW, 1.6 ... 7 A, 24 V DC, screw terminal SIRIUS 3RM1 direct starter for the functional control of three-phase motors.\nSmall design width, multifunctionality, with electronic overload protection, long service life and energy-efficient hybrid switching technology, small variety of devices thanks to large adjustment range, simple installation thanks to reduced wiring effort, quick diagnostics via LED indicators, innovative housing concept e.g. with labeled cover doors and removable connection terminals.\nCan be supplied as a direct or reversing starter, optionally with ATEX certification and safety switch-off, with different motor current ranges, types of supply voltage and connection techniques.\nNumerous accessories like for example equipment connectors, fuse module, power system or sealable covers complete the system.\nStarting in small spaces - SIRIUS 3RM1 motor starters.

Read more less

Siemens 6ES75901AE800AA0SIMATIC S7-1500, profile rail 482.6 mm (approx. 19 inches), incl. Grounding screw, integrated profile rail for mounting small parts e.g. terminals, circuit breaker and relay The profile rails SIMATIC are available in different lengths for direct installation in the control cabinet or for cutting to the desired length. For correct earthing connection, appropriate earthing terminals must be used.

Read more less

Siemens 6ES75901AC400AA0SIMATIC S7-1500, profile rail 245 mm (approx. 9.6 inches), incl. Grounding screw, integrated profile rail for mounting small parts e.g. terminals, circuit breaker and relay Profile rails SIMATIC are available in different lengths for direct installation in the control cabinet or for cutting to the desired length. For correct earthing connection, appropriate earthing terminals must be used.

Read more less

Siemens 6AV21232GA030AX0SIMATIC HMI, KTP700 Basic DP, Basic Panel, key/touch operation, 7-colour TFT display, 65536 colours, PROFIBUS interface, configurable from WinCC Basic V13/STEP 7 Basic V13, includes the Open Source software, which is provided free of charge, see the attached CD. The Basic Panels are designed for the economical implementation of simple visualization tasks on machines. Their basic equipment and functionality, as well as the particularly attractive price, make them the perfect entry-level equipment.

Read more less

Siemens 3RU21364FB0overload relay 28...40 A thermal for motor protection frame size S2, CLASS 10 mounting on contactor main circuit: screw terminals auxiliary circuit: screw terminals manual reset- automatic thermal overload relay SIRIUS3RU2 for current-dependent protection of loads with normal starting against excessive overheating caused by overload or phase failure.\nThis construction series is particularly flexible and economical. International approvals (e.g. IEC and UL/CSA) and versions for applications in areas at risk of explosion (ATEX or IEC Ex) are obviously available.\nSupplied with different adjustment ranges of the overload release. They are available with screw or spring-loaded terminals for quick, maintenance-free and vibration-resistant connection as well as for separate mounting.\nThe accessories are uniformly suitable for all frame sizes from S00 to S3.\nSimple, efficient, always up-to-date - the SIRIUS. modular system

Read more less

Siemens 6ES75211BL100AA0SIMATIC S7-1500, digital input module, DI 32xDC 24V BA, 32 channels in groups of 16, input delay typ. 3.2 ms, input type 3 (IEC 61131) scope of delivery incl. push-in front connector SIMATIC ET 200MP is a modular, scalable I/O system for universal use in IP20 and offers the same system advantages as the S7-1500. It enables minimum bus cycle times and very fast response times even for large quantity structures. The distributed I/O system is particularly easy to install, wire and commission. Thanks to the scalable structure, the peripheral station can be customized exactly to the needs on site. The wide range of input/output modules ensures the scalable configuration of an ET 200MP station. Numerous digital and analog input and output modules are available. This ensures the possibility of universal use of the system.

Read more less

Siemens 6SL32560AP000JA0door mounting set SINAMICS G120 IP55/ UL type 12 intelligent Operator Panel IOP (IP54), IOP-2 (IP55) and Basic Operator Panel BOP-2 (IP55) includes material seal fastening and connecting cable (5m) SINAMICS door mounting kit Door mounting kit for Intelligent Operator Panel (IOP-2) and Basic Operator Panel (BOP-2) for the SINAMICS G120 modular frequency converter and the SINAMICS G120C compact converter. With an optional door mounting kit, an operator panel can be installed on an electrical panel door quickly and easily. When mounted in a door, the Intelligent Operator Panel (IOP-2) achieves the degree of protection IP55/UL Type 12 and the Basic Operator Panel (BOP-2) achieves the degree of protection IP55. The following are included in the scope of delivery: the gasket, the fixing material and a 5 m long connection cable. SINAMICS - the homogeneous drive family for every field of application.

Read more less

Siemens 6GK72435DX300XE0CM 1243-5 communication module for connecting SIMATIC S7-1200 to PROFIBUS as DP Master unit PG/OP communication S7 communication

Read more less

Siemens 6GK72425DX300XE0Communication module (CM 1242-5 for connecting SIMATIC S7-1200 on PROFIBUS as DP slave unit

Read more less

Siemens 6ES79720BB520XA0SIMATIC DP, connector for PROFIBUS up to 12 Mbit/s 90° cable exit, Fast-Connect insulation piercing technology, with PG socket 15.8x 59x 35 ,6mm (WxHxD) Zubehör für SIMATIC DP

Read more less

Siemens 6ES71316BF010AA0SIMATIC ET 200SP, Digital input module, DI 8x 24VDC Basic, input type 2 (IEC 61131), Sink Input, (PNP, read on P), Unit packaging: 1 piece suitable for BU type A0, Color code CC01, Input delay 0.05..20ms Diagnostic module for: supply voltage SIMATIC ET 200SP is a scalable and highly flexible decentralized peripheral system. Thanks to its small overall dimensions it is particularly suitable for installation in small distribution boxes at machine level. The modules can be plugged directly into an ET 200SP CPU or connected via PROFINET or PROFIBUS to a central controller. SIMATIC ET 200SP can be expanded with up to 64 I/O modules, which can be inserted in any combination. The system offers a very wide range of units. Many modules are also available with different performance levels, which greatly improves scalability regarding functionality and price. In addition to modules with standard functionality (ST), modules with an expanded function set and diagnostics (HF High Feature / HS High Speed) are also available. For price-sensitive applications, basic functionality (BA) modules are available. The advantage of the ET 200SP system is its ease of use, e.g. thanks to the free choice of connection technology to PROFINET via the BusAdapter, tool-free cabling with push-in technology, improved accessibility of the cabling with the new arrangement of the spring releases next to the respective openings for the conductors and the specific diagnostic functions of channel. The possibility of replacing modules and terminal boxes during operation, the so-called Hot Swapping, ensures the availability and productivity of the machine. The scalable and cost-optimised configuration of an ET 200SP station is ensured by the wide range of I/O modules. In addition to digital and analog input and output modules, fail-safe variants are also available for applications up to SIL 3 / PLe. This also applies to integrated motor starters, which are suitable for motors up to 5.5 kW. Energy meters for measuring and analyzing energy consumption, IO-Link master (V1.1.) as well as many other communication and technology modules allow you to adapt the system to every automation task. The accessories available for ET 200SP range from colored and non-coloured reference identification plates to marking labels for the individual modules and ensure maximum visibility in the electrical panel.

Read more less

Siemens 6ED10551CB100BA2LOGO! DM16 24 expansion module, SV/I/O: DC 24 V/DC 24 V/trans., 8 DI/8 DO, 4TE for LOGO! 8 The LOGO! expansion modules allow you to create a LOGO! very personalized. A LOGO! basic device 8 can be expanded up to max. 24 digital inputs, 20 digital outputs, 8 analog inputs and 8 analog outputs. For this purpose, ten different expansion modules are available which allow the addition of digital or analog inputs and outputs with different input voltages.

Read more less

Siemens 6ES75221BH100AA0SIMATIC S7-1500, digital output module, DQ16xDC 24V/0.5A BA, 16 channels in groups of 8, 4A per group, module supports shutdown in load group safety up to SILCL2 according to EN 62061:2005 + A2:2015, and category 3 / PL d according to EN ISO 13849-1:2015. supply incl. push-in front connector SIMATIC ET 200MP is a modular, scalable I/O system for universal use in IP20 and offers the same system advantages as the S7-1500. It enables minimum bus cycle times and very fast response times even for large quantity structures. The distributed I/O system is particularly easy to install, wire and commission. Thanks to the scalable structure, the peripheral station can be customized exactly to the needs on site. The wide range of input/output modules ensures the scalable configuration of an ET 200MP station. Numerous digital and analog input and output modules are available. This ensures the possibility of universal use of the system.

Read more less

Siemens 3RB30361UB0overload relay 12.5...50 A electronic for motor protection frame size S2, CLASS 10E mounting on contactor main circuit: screw auxiliary circuit: screw manual reset- automatic electronic overload relay SIRIUS 3RB3 for current-dependent protection of loads with normal and heavy starting against excessive overheating caused by overload, phase asymmetry or phase failure.\nThanks to the wide current setting ranges and the different characteristics of release, just a few types of devices can satisfy the needs of entire motor series. Their reduced power dissipation results in high energy efficiency and low heating in the electrical cabinet. International approvals (e.g. IEC and UL/CSA) and versions for applications in areas at risk of explosion (ATEX) are obviously available.\nSupplied with different adjustment ranges of the overload release and with different tripping classes. They are available with screw or spring-loaded terminals for quick, maintenance-free and vibration-resistant connection as well as for separate mounting.\nThe accessories are uniformly suitable for all frame sizes from S00 to S3.\nSimple, efficient, always up-to-date - the SIRIUS modular system.

Read more less

Siemens 6ES72315PF320XB0SIMATIC S7-1200, analog input module, SM 1231 RTD, 8x AI RTD modules SIMATIC S7-1200 Basic Controller - Flexibility guaranteed by various communication options. With the input/output modules you can customize the configuration of yourSIMATIC S7-1200 (except CPU 1211C) according to your specific needs. Furthermore, a series of digital or analog input and output modules and mixed modules are available, also in fail-safe variants. With these comprehensive construction options, you can save space in the control cabinet and optimize hardware costs.

Read more less

Siemens 6SL32105BE215CV0SINAMICS V20 3AC 380 ... 480 V - 15/+ 10 % 47-6 nominal power 1.5 kW with 150 % overload for 60 sec. integrated filter C3 I/O interface: 4 DI, 2 DO, 2 AI, 1 AO field bus: USS/MODBUS RTU with built-in BOP protection degree IP20/UL open type dimensions: large. built H 90x166x146 (WxH:

Read more less

Siemens 6ED10551MB000BA2LOGO! DM8 12/24R expansion module, SV/I/O: 12, 24V/12V/24V/relay, 2TE, 4 DE/4 DA for LOGO! 8 The LOGO! expansion modules allow you to create a LOGO! very personalized. A LOGO! basic device 8 can be expanded up to max. 24 digital inputs, 20 digital outputs, 8 analog inputs and 8 analog outputs. For this purpose, ten different expansion modules are available which allow the addition of digital or analog inputs and outputs with different input voltages.

Read more less