Siemens 8WH20000AG00feed-through terminals with spring terminal, cross section: 0.5 ... 4 mm2, width: 6.2 mm, colour: gray Connection technology with combinable terminals for various industrial applications and modern installation technique by Siemens. You can decide whether to use the screw, spring, push-in or quick connection techniques: all connection techniques can be freely combined with each other. The registration and test accessories are standardized and usable across the board. With the combinable terminals of Siemens many applications can be realized in industrial, functional and residential buildings. The right connection technology for every need is thus available! The combinable terminals Siemens are characterized above all by the following features: 1. Safe and durable contact. 2. Easy to untie electrical connections such as cables and conductors. 3. Creation of a variety of applications. 4. Convenient and simple mounting technique and connection technique. 5. Wide range of standardized accessories. 6. Reliable safety during installation thanks to touch protection as standard. 7. Optimal technique for your safety - only from Siemens. &DPMD_ACC602_001_000_1001316&

Read more less

Siemens 3RV20111HA10 circuit breaker size S00 for motor protection, CLASS 10 release A 5.5...8 A release N 104 A screw terminal standard switching power SIRIUS 3RV2 circuit breaker For motor protection for safe disconnection in the event of a short circuit and for overload protection of consumers and the system as well as for the safe separation of the system from the mains.\nThe compact and tropicalized circuit breakers are optimized, thanks to their low thermal dispersion, for use in feeders, naturally also for motors IE3/IE4 and equally for DC switching. International approvals (e.g. IEC and UL/CSA) and versions for applications in potentially explosive areas (ATEX or IEC Ex) are obviously available.\nDevice variants for motor protection are available (also with overload relay function ), system protection, short-circuit protection of combined starters, transformer protection. as a main and EMERGENCY STOP switch and for use in IT networks. They are available with screw or spring-loaded terminals for quick, maintenance-free and vibration-resistant connection as well as optionally with a built-in auxiliary switch block.\nAll accessories such as e.g. auxiliary contact blocks, auxiliary releases, signaling contact blocks etc. they are uniformly suitable for all construction sizes. The various power supply options, such as the SIRIUS 3RV29 power supply system, significantly reduce the wiring of the main circuit.\nThe 3RV2 circuit breakers replace the proven 3RV1 series.\nSimple, efficient, always up-to-date - the SIRIUS modular system.

Read more less

Siemens 6ED10522MD080BA1LOGO! 12/24RCEO, logic module, PS/I/O: 12/DC 24 V/relay, 8 DI (4 AI)/4 DO, without display, 400 block memory, Ethernet modularity and expandability, integrated Web Server, data log , customized web pages, standard microSD card for LOGO! SOFT Comfort from V8.3, previous projects executable, cloud connection in all LOGO! basic devices 8.3 The LOGO! basic devices 8 with 8 digital inputs and 4 digital outputs and their reduced installation width of only 72 mm, have many well-known functions (current impulse relay, staircase light automation, auxiliary contactor, time relay, etc.) already integrated and freely combinable with each other. The control programs are easily created and simulated on a PC. The respective integrated Ethernet interface allows communication with up to nine LOGO! modules. 8 or SIMATIC S7 systems. With the Web Server, also integrated, the connected users can be monitored and controlled via WLAN or Internet. The user himself can configure web pages, even if he has no knowledge of HTML. Using additional modules, GSM or GPS communication can be implemented as well as integration into a building control system. The LOGO! basic modules 8 are available with and without display for different input voltages as well as with transistor or relay outputs (up to 10 A nominal). Expandable with additional modules up to 24 DI / 20 DQ (8 AI / 8 AQ). Integrated cloud communication. LOGO! 8 can also be expanded with an external Text Display for significant messages in plain text. The backlight color is selectable for optical highlights. Different LOGOs are also available! Power Module for power supply.

Read more less

Siemens 3NW7131SENTRON, fuse holder for cylindrical cartridges, 14x51 mm, 3-pole, In: 50 A, Un AC: 690 V &DPMD_ACC602_001_000_1004330&

Read more less

Siemens Simatic ET 200SP HA, Analogue input module 6DL11346JH000PH1 SIMATIC ET 200SP HA, Analog input module, AI 16XTC/8XRTD 2-/3-/4-Wire HA, suitable for Terminal Block H1, M1, Color code CC00, channel diagnostics, 16bit , +/-0.05%, 2-/3-/4-Wire Technical data General informationProduct type designation AI 16 x TC/8xRTD 2-/3-/4-wire HAFirmware version V1.1● Possible FW update YesTerminal block usable terminal block type H1, M1, P0 and N0Color code for module-specificcolor coding plateCC00 Product function● I&M data Yes; I&M0 ... I&M3 Engineering with● STEP 7 TIA Portal configurable/integrated from version V16● STEP 7 configurable/integrated from version V5.6● PCS 7 configurable/integrated by version V9.0● PCS neo configurable/integrated from version V3.0● PROFINET from version GSD/GSD revision GSDML V2.3 Redundancy● Redundancy capabilities Yes; with type TB M1 CiR - Configuration in RUNReparameterization in RUN possible Yes Supply voltageRated value (DC) 24 VAllowable range, lower limit (DC) 19.2 VAllowable range, upper limit (DC ) 28.8 VReverse polarity protection Yes Input currentCurrent consumption (nominal value) 75 mACurrent consumption, max. 100 mA Power dissipationPower dissipation, typ. 1.8 W Address spaceAddress space per module● Address space per module, max. 64 bytes; + 2 bytes for IQ information Analog inputsNumber of analog inputs● for voltage measurement 16● for measurement with resistance/thermoresistance 8● for measurement with thermocouple 16Allowed input voltage per input in voltage (destructive limit), max.5 VConstant measuring current for resistive transducers, typ. 2 mA

Read more less

SIEMENS LOGO! 12/24RCE 6ED10521MD080BA1 LOGO! 12/24RCE, logic module, display PS/I/O: 12/DC 24 V/relay, 8DI (4AI)/4DO, 400 block memory, Ethernet modularity and expandability, integrated Web Server, data log, customized web pages, standard microSD card for LOGO! Soft Comfort as of V8.3, previous projects executable, cloud connection in all LOGO! basic devices 8.3. DisplayWith display YesMounting typeMounting on 35 mm standard rail, width of 4 units dimensionSupply voltageRated value (DC)● 12 V DC Yes● 24 V DC YesPermitted range, lower limit (DC) 10.8 VAllowable range, upper limit (DC) 28.8 V TimeClock switches● Number 400; Max. 400, depending on function● Power reserve 480 hDigital inputsNumber of inputs 8; of which 4 can be used as analogue (0 ... 10 V)Digital outputsNumber of outputs 4; RelayShort circuit protection No; requires external protectionOutput current● for signal "1" permitted range for 0 ... 55 °C, max. 10 ARelay outputsContact breaking capacity— with inductive load, max. 3 A— with ohmic load, max. 10 AEMCRadio interference emission according to EN 55 011● Limit value class B, for use in residentialareasYes; Radio interference suppression according to EN 55011, limit value class BStandards, approvals, certificatesCE marking YesCSA approval YesUL approval YesApproval FM Yesdeveloped according to IEC 61131 Yesaccording to VDE 0631 YesMarine approval Yes

Read more less

Siemens 6DL11316DF000PK0 SIMATIC ET 200SP HA, Digital input module, DI 8X24 ... 125VDC HA suitable for Terminal Block K0, color code CC42, channel diagnostics

Read more less

6DL11936TP000DK0 Siemens SIMATIC ET 200SP HA, terminal block, type K0 16 push-in terminals, load group Technical dataGeneral informationProduct type designation    Type K0Product function● I&M data    Yes; Asset dataSupply voltageRated value (DC)    24 VExternal protection of power cables    Yes; DC 24 V / 10 A (thermal circuit breaker with type B or C tripping characteristic, fast-acting equipment protection fuse with sufficient breaking capacity, electronic fuse with characteristic corresponding to type B or C)Current carrying capacityup at 70 °C, max.    10 A; Permissible load current dependent on the number of terminal blocksfor process terminals, max.    5 AHardware configurationFormation of potential groups● support of potential groups    Yes● New potential group potential    Yes● Potential group continued from left    NoSlot● Number of slots    1Potential isolationbetween backplane bus and supply voltage    Yes; DC 4 200 V/1 min, Type Testbetween potential groups (Powerbus)    Yes; DC 1 500 V/1 min, Type Test (SELV / PELV for functional earth FE)between process terminals and supply voltage    Yes; DC 4 200 V/1 min, Type TestAmbient conditionsAmbient temperature in operation● Horizontal mounting position, min.    -40 °C● Horizontal mounting position, max.    70 °C● Vertical mounting position, min.    -40 °C● Vertical mounting position, max.    60 °CDimensionsWidth    22.5 mmHeight    175 mmDepth    77 mmWeightsWeight, approx.    78 g  

Read more less

Siemens 3RK12073BQ400AA3 Compact AS-i module K60 analog 2AI, IP67 2 x inputs, resistor PT100, Ni100, 0..600 ohm for 4-wire sensors 2 x M12 sockets mounting plate 3RK1901-0CA00 to be ordered separately.

Read more less

Siemens 6ES73613CA010AA0 SIMATIC S7-300, IM 361 interface in expansion rack for connection to the central rack (IM360), 24V DC supply voltage, with K-bus

Read more less

Siemens 6GK75436WX000XE0 CP 1543SP-1 communications processor for connecting a unitSIMATIC S7-ET 200SP si Industrial Ethernet; Security (firewall and VPN) open IE communication (TCP/IP, ISO on TCP, UDP) PG/OP, S7 routing, IP broadcast/multicast, SNMPV1/V3, DHCP, secure e-mail, IPV4/IPV6, support of SINEMA Remote Connect with autoconfiguration, time synchronization via NTP, access to the CPU web server, BusAdapter required. Technical data transmission speed transmission speed ● on interface 1 10 ... 100 Mbit/s interfaces number of interfaces / according to Industrial Ethernet 1 number of electrical connections ● on interface 1 / according to Industrial Ethernet 2 making the electrical connection ● on interface 1 / second Industrial Ethernet via BusAdapter ET 200SP (RJ45, FC, LC, SCRJ), integrated switch supply voltage, current consumption, power dissipation voltage type / DC supply voltage supply voltage 24 V supply voltage 19.2 ... 28.8 V Power dissipation [W] 6 W environmental conditions room temperature ● for vertical installation / during operation -30 ... +50 °C ● with horizontal installation / during operation -30 ... +60 °C ● during storage -40 ... +70 °C ● during transport -40 ... +70 °C relative humidity ● at 25 °C / non-condensing / during operation / max. 95 % IP protection degree IP20

Read more less

Siemens 6SL32240BE411UA0 SINAMICS G120 Power Module PM240 without filter with integrated braking chopper 3AC 380-480V +10/-10% 47-63 Hz high overload power: 110 KW at 160 % 3 s, 136 % 57 s, 100 % 240 s temp. ambient 0 ... +50 °C low overload power: 132 kW at 150 % 3 s, 110 % 57 s, 100 % 240 s temp. ambient 0 ... +40 °C 634 x 350 x 316 (HXBXT), FSF degree of protection IP20 without Control Unit and BOP

Read more less

Siemens 6GK73431EX300XE0 CP 343-1 communications processor for connecting SIMATIC S7-300 to Industrial Ethernet via ISO and TCP/IP, PROFINET IO Controller or PROFINET IO Device, integrated 2-port switch ERTEC 200, communication S7, Fetch/Write, Send/Receive RFC1006, Multicast, DHCP, NTC-CPU Sync, with and without diagnostics, initialization via LAN, 2x RJ45 connections for LAN with 10/100 Mbit/s. Technical databaud ratebaud rate● on interface 1 10 ... 100 Mbit/sinterfacesnumber of interfaces / according to Industrial Ethernet 2number of electrical connections● on interface 1 / according to Industrial Ethernet 2● for power supply 1execution of the electrical connection● of the Industrial Ethernet interface Port RJ45● on interface 1 / according to Industrial Ethernet RJ45 portelectrical connection execution● for voltage supply 2-pole plug-in strip terminal blocksupply voltage, current consumption, power loss voltage type / of the supply voltage DCsupply voltage / 1 / from backplane bus 5 Vsupply voltage 24 Vsupply voltage / external 24 Vsupply voltage / external / with DC / nominal value 24 Vrelative positive tolerance / with DC / with 24 V 20 %relative negative tolerance / with DC / with 24 V 15 %current consumption● from backplane bus / with DC / with 5 V / typ. 0.2 A● from external supply voltage / at DC / at 24 V/ typ.0.16 A● from external supply voltage / at DC / at 24 V/ max.0.2 Apower dissipated [W] 5.8 W

Read more less

Siemens 3VA12254EF320AA0 automatic circuit breaker 3VA1 IEC frame 250 breaking capacity class S Icu=36kA with 415V 3 poles, system protection TM240, ATAM, In=250A overload protection Ir=175A...250A short circuit protection Ii =5...10 x In flat screw connections Technical datainsulation voltage / rated value 800 Voperational voltage / with DC / rated value 500 Voperational voltage / with AC / rated value 690 V power dissipated [W] / max. 57 Wpower dissipation [W] / at nominal current value / with AC/ in hot operating state / per pole19 Wmechanical service life (operating cycles) / typ. 20 000electrical lifespan (switching cycles) / with AC-1 / with380/415 V8 000electrical lifespan (switching cycles) / with AC-1 / at 690 V 5 400product characteristic / for neutral conductor /upgradable/upgradeable / protection against short circuit andoverloadNocarrying out earth fault monitoring Withoutproduct function● communication function No● other measurement function NoNet weight per UQ 1.597 kg

Read more less

Siemens 6ES74162XN050AB0 ********** spare part********* SIMATIC S7-400, CPU 416-2 central unit with: main memory 5.6 MB , (2.8 MB code, 2.8 MB data), 1st interface MPI/DP 12 Mbit/s, 2nd interface PROFIBUS DP Technical dataSupply voltageRated value (DC) voltage supply via the system power supplyInput currentfrom the backplane bus DC 5 V, typ. 0.9 Afrom backplane bus DC 5 V, max. 1.1 Afrom backplane bus 24 V DC, max. 300mA; 150 mA per DPinterface from DC 5 V interface, max. 90mA; for each DP interfacePower lossPower loss, typ. 4.5 WMemoryMemory type RAMWork memory● integrated 5.6 MB● integrated (for program) 2.8 MB● integrated (for data) 2.8 MB● expandable NoLoad memory● expandable FEPROM Yes; with Memory Card (FLASH)● Expandable FEPROM, max. 64 MB● Integrated RAM, max. 1 MB● Expandable RAM Yes; with Memory Card (RAM)● Expandable RAM, max. 64 MbyteBackup● present Yes● with battery Yes; all data● without battery No    

Read more less

Siemens 6AV21070EB000BB0 SIMATIC WinCC Server for Runtime Professional option for WinCC (TIA Portal) runtime software, single license without SW, without documentation license key on USB stick, class A - - contents: 1x USB

Read more less

Siemens 6ES71324BD020AA0 *** spare part *** SIMATIC DP, 5 electronics modules for ET 200S, 4 DO standard DC 24V/0.5A, width 15mm, 5 pieces per packaging unit Technical dataSupply voltageReturn voltage resistance Yes; when using the same load voltage as the Power moduleLoad voltage L+● Rated value (DC) 24 V; from Power module● Reverse polarity protection Yes; a polarity reversal can cause the digital outputsInput currentto switch from the load voltage L+ (without load), max. 10mA; per channelfrom backplane bus 3.3 V DC, max. 10 mAPower dissipationPower dissipation, typ. 0.8 WAddress spaceAddress space per module● Address space per module, max. 1 byte● with 4 bit compactionDigital outputsType of digital output Source Output (PNP, switching to P)Number of outputs 4Short circuit protection Yes● Threshold of intervention, typ. 1 ... 1.5 ALimitation of the inductive opening voltage on L+ (-55 ... -60 V)Control of a digital input YesSwitching capacity of the outputs ● with lamp load, max. 5 WLoad resistance range● Lower limit 48 Ω● Upper limit 3 400 ΩOutput voltage● for signal "1", min. L+ (-1 V)Output current● for signal "1" nominal value 0.5 A● for signal "1" permissible range, min. 7 mA● for signal "1" permitted range, max. 600 mA● for signal "0" residual current, max. 0.3 mA

Read more less

Siemens 6ES72221BF220XA0 ***spare part*** SIMATIC S7-200, digital output module EM 222, only for CPU S7-22X, 8DA, DC 24V Technical dataSupply voltageLoad voltage L+● Rated value (DC) 24 V● Permissible range, lower limit (DC) 20.4 V● Permissible range, upper limit (DC) 28.8 VInput currentfrom backplane bus DC 5 V, max. 50 mAPower dissipationPower dissipation, typ. 2 WDigital outputsNumber of outputs 8Short-circuit protection NoLimitation of the inductive opening voltage on L+ (-48 V)Output voltage● for signal "1", min. 20 VOutput current● for signal "1" rated value 0.75 A● for signal "1" permissible range for 0 ... 55 °C, max. 750 mA● for signal "0" residual current, max. 10 µAParallel connection of two outputs● for power increase YesTotal current of outputs (per group)all installation positions— up to 40 °C, max. 3 A— Maximum for each conductor/group, max. 3 AHorizontal mounting position— up to 55 °C, max. 3 ARelay outputsContact breaking capacity— with inductive load, max. 0.75 A— with lamp load, max. 5 W—with ohmic load, max. 0.75 A  

Read more less

Siemens 6ES71971LB000XA0 SIMATIC S7, Y-Coupler for the creation of a Y-Link for redundant controllers Technical data Supply voltageDesign of supply voltage    via bus modulePermitted range, lower limit (DC)    20.4 VPermitted range , upper limit (DC)    28.8 VInput currentCurrent consumption, max.    300 mAPower dissipationPower dissipation, typ.    1 WInterfacesPROFIBUS DPCharacteristics of the lower-level DP master system— Transmission rate, max.    12 Mbit/s; 45.45 kbit/s ... 12 Mbit/s— Termination of the subordinate DP master system    active bus terminating resistor (Bus Terminator)— Use of OLM/OBT    Yes— Use of Repeater RS ​​485, max.    9— Number of DP slaves, max.    31; 64 when using RS 485 Repeater or OLM / OBTRequirements for the DP master system— Length of the parameterization telegram    244 bytesProtocolsPROFIBUS DP    YesAS-Interface    NoAlarms/diagnostics/status informationStatus display    NoAlarms    NoDiagnostic function    Yes

Read more less

Siemens 3UG4501-1AW30 Analog control relay level monitoring resistance monitoring from 2 to 200 kOhm overshoot and undershoot AC/DC 24...240V, DC and AC 50 up to 60 Hz 2-point or 1-point adjustment point release delay 0.5 ... 10 s 1 CO contact screw terminal Successor product for 3UG3501 Technical dataproduct function Level control relaydesign of LED display Yesapparent power consumption● at DC— at 24 V max . 2 VA—with 240 V max. 4 VA● with AC— with 24 V max. 2 VA—with 240 V max. 4 VAinsulation voltage● for overvoltage category III according to IEC60664 with pollution degree 3 nominal value300 Vpollution degree 3voltage type● of the control supply voltage AC/DCimpulse withstand voltage nominal value 4 kVIP protection degree IP20shock resistance according to IEC 60068-2-27 half sine wave 15g/11 msvibration resistance according to IEC 60068-2-6 1 ... 6 Hz: 15 mm, 6 ... 500 Hz: 2gmechanical service life (operating cycles) typ. 10 000 000electrical life (switching cycles) with AC-15 with 230V typ.100 000reference code according to IEC 81346-2:2009 Kaccuracy of relative repeatability 1 %RoHS directive (date) 05/01/2012SVHC substance name Lead - 7439-92-1Lead monoxide (lead oxide) - 1317-36-8Weight 0.144 kg

Read more less

Siemens 6SL32240BE355AA0 ***Spare part*** SINAMICS G120 Power Module PM240 with integrated class A filter with integrated brake chopper 3AC 380-480V +10/-10% 47-63 Hz High overload power: 55 kW with 200 % 3s, 150 % 57s, 100 % 240s Ambient temp. -10 ... +50 °C Low overload power: 75 KW with 150 % 3s, 110 % 57s, 100 % 240s Ambient temp. -10 ... +40 °C 934 X 350 X 316 (HXBXT), FSF Degree of protection IP20 without Control Unit and BOP

Read more less

Siemens 6SL32101PE161AL1SIMATIC S7-1200, CPU 1214C, compact CPU, DC/DC/DC, onboard I/O: 14 DI DC 24 V; 10 DO DC 24 V; 2 AI 0...10 V DC, power supply: DC DC 20.4...28.8 V, program memory / data memory 150 KB Technical data Mains voltage 380...480 V Number of input phases 3 Number of output phases 3 Maximum output frequency 550 Hz Maximum output voltage 400V Rated output current I2N 5.9 A Maximum output power with quadratic load at nominal output voltage 2.2 kW Maximum output power with linear load at nominal output voltage 1.5 kW Relative symmetrical tolerance of mains frequency 5% Relative symmetrical tolerance of the mains voltage -10% With control unit No Suitable for use in the industrial sector Yes

Read more less

Siemens 3RW3046 1BB14 SIRIUS S3 soft starter 80 A, 45 kW/400 V, 40 °C AC 200-480 V, AC/DC 110-230 V screw terminals Technical data Product brand SIRIUS Product name Softstarter Product scope of delivery ● Integrated bypass contact system Yes ● thyristors Yes Product function ● intrinsic protection of the appliance No ● Motor overload protection No ● thermistor motor protection analysis No ● external reset No ● Adjustable current limitation No ● circuit inside the motor triangle No integral part of the product output for engine brake No insulation voltage rated value V 600 Pollution degree 3, according to IEC 60947-4-2 Thyristor cut-off voltage max. V 1 600 reference code according to EN 61346-2 Q reference code according to DIN 40719 with extension according to IEC 204-2 according to IEC 750 G

Read more less

Siemens 6SL32430BB301FA0 SINAMICS G120 Control Unit CU230P-2 PN PROFINET integrated 6 DI, 3 DO, 4 AI, 2 AO 1 motor temperature sensor input sensor input 2 PSU outputs (DC 10V, DC 24V) 1 PSU-in (DC 24V) USB and MMC interface Degree of protection IP20 Technical data Number of input phases Others Number of analog outputs 2 Number of analog inputs 2 Number of digital outputs 3 Number of digital inputs 6 Suitable for use in the industrial sector No Suitable for use in the commercial/domestic sector No Supports TCP/IP protocol Yes Supports PROFIBUS protocol No Supports CAN protocol No Supports INTERBUS protocol No Supports ASI protocol No Supports EIB/KNX protocolno Supports MODBUS protocol No Supports Data-Highway protocol No Supports DeviceNet protocol No Supports SUCONET protocol No Supports LON protocol No Supports PROFINET IO protocol No Supports PROFINET CBA protocol No Supports SERCOS protocol No Supports Foundation Fieldbus protocol No Supports Ethernet/IP protocol Yes Supports AS-Interface Safety at work protocol No Supports DeviceNet Safety protocol No Supports INTERBUS-Safety protocol No Supports PROFIsafe protocol Yes Supports SafetyBUS p protocol No 

Read more less