SIEMENS COMMUNICATION MODULES FOR PLC

Siemens 6GK73431CX100XE0CP 343-1 Lean communications processor for connecting SIMATIC S7-300 to Industrial Ethernet via TCP/IP and UDP, Multicast, Send/Receive with and without RFC1006 , Fetch/Write, S7 communication (server), integrated 2-port PROFINET IO device switch ERTEC 200, module replacement without PG, SNMP diagnostics, initialization via LAN, 2x RJ45 connections for LAN at 10/100 Mbit/s

Read more less

Siemens 6ES73411CH020AE0SIMATIC S7-300, CP 341 communications processor with RS-422/485-Schnittstelle incl. design package on CD

Read more less

Siemens 6ES72411CH320XB0SIMATIC S7-1200, communication module CM 1241, RS422/485, 9-pin Sub-D (socket) supports Freeport SIMATIC S7-1200 Basic Controller - Flexibility guaranteed by various communication options. To ensure data transfer to the most diverse systems, a range of communication modules is available for the SIMATIC S7-1200, from the RS 232 interface to the AS-i interface, up to the PROFIBUS connection in master or slave mode. This guarantees a wide range of application possibilities for the SIMATIC S7-1200.

Read more less

Siemens 6GK72431BX300XE0CP 1243-1 communications processor for connecting SIMATIC S7-1200 as an additional Ethernet interface and for connecting to the Control Center via telecontrol protocols (DNP3, IEC 60870 , TeleControl Basic), Security (Firewall, VPN)

Read more less

Siemens 6ES72411CH301XB0SIMATIC S7-1200, Communication Board CB 1241, RS-485, terminal block, supports Freeport SIMATIC S7-1200 Basic Controller - Flexibility provided by various communication options . If you need to expand your SIMATIC S7-1200 CPU with only a few inputs or outputs, Signal Boards are a valid alternative to input and output modules. The Signal Boards are inserted directly on the front of the controller (also possible with CPU 1211C) and are available as analogue or digital inputs and outputs and mixed modules. A Communication Board with RS 485 interface is also available. The Signal Boards also allow subsequent expansion of the configuration without requiring additional space in the control cabinet.

Read more less

Siemens 6GK72435DX300XE0CM 1243-5 communication module for connecting SIMATIC S7-1200 to PROFIBUS as DP Master unit PG/OP communication S7 communication

Read more less

Siemens 6GK72425DX300XE0Communication module (CM 1242-5 for connecting SIMATIC S7-1200 on PROFIBUS as DP slave unit

Read more less

SIEMENS COMMUNICATION PROCESSOR CP 1543-1 6GK75431AX000XE0 CP 1543-1 communications processor for connecting SIMATIC S7-1500 to Industrial Ethernet; TCP/IP, ISO, UDP, S7 communication, IP broadcast/multicast, security (VPN, firewall) diagnostics SNMPv1/v3, DHCP, FTP client/server, e-mail, IPv4/IPv6, IEEE 802.1X (radius), time synchronization via NTP, 1x RJ45 (10/100/1000 Mbit). General information: Transmission rate● on interface 1 10 ... 1000 Mbit/s Interfacesnumber of interfaces / according to Industrial Ethernet 1number of electrical connections● on interface 1 / according to Industrial Ethernet 1 carrying out the electrical connection● on interface 1 / according to Industrial Ethernet RJ45 port Supply voltage, absorbed current, dissipated powertype of voltage / of the DC supply voltagesupply voltage / 1 / from backplane bus 15 Vrelative symmetrical tolerance / with DC● with 15 V 3 % current consumption● from backplane bus / with DC / with 15 V / typ. 0.35 A power dissipation [W] 5.3 W Environmental conditions ambient temperature● for vertical installation / during operation 0 ... 40 °C● with horizontal installation / during operation 0 .. .60 °C● during storage -40 ... +70 °C● during transport -40 ... +70 °C Relative humidity● at 25 °C / non-condensing / during operation / max. 95 %IP protection degree IP20 Design, dimensions and weightsmodule format Single-width compact S7-1500 modulewidth 35 mmheight 142 mmdepth 129 mmnet weight 0.35 kgfastening type● mounting on S7-1500 profile rail Yes Product features, product functions, product components / genericnumber of units● per CPU / max. 8● note dependent on CPU type

Read more less

SIEMENS COMMUNICATION PROCESSOR CP 1542SP-16GK75426UX000XE0 CP 1542SP-1 communications processor for connecting a SIMATIC S7-ET 200SP module to Industrial Ethernet; open IE communication (TCP/IP, ISO on TCP, UDP), PG/OP, S7 routing, IP broadcast/multicast, SNMPV1, DHCP, e-mail, IPV4/IPV6, time synchronization via NTP, access to the company's web server CPU, BusAdapter required. General information: Baud rateBaud rate● on interface 1 10 ... 100 Mbit/sinterfacesnumber of interfaces / according to Industrial Ethernet 1number of electrical connections● on interface 1 / according to Industrial Ethernet 2execution of the electrical connection● on interface 1 / according to Industrial Ethernet via BusAdapter ET 200SP (RJ45, FC, LC, SCRJ), integrated switch Supply voltage                                                       current absorbed, power dissipatedtype of voltage / of the supply voltage DCsupply voltage 24 Vsupply voltage 19.2 ... 28.8 Vpower dissipation [W] 6 Wenvironmental conditionsambient temperature● for vertical installation / during during operation -30 ... +50 °C● with horizontal installation / during operation -30 ... +60 °C● during storage -40 ... +70 °C ● during transport -40 ... +70 °C Relative humidity● at 25 °C / non-condensing / during operation / max. 95 %IP protection degree IP20 Constructive form, dimensions and weightswidth 60 mmheight 117 mmdepth 74 mmnet weight 0.18 kgMounting type● ​​Mounting on 35 mm DIN rail YesProduct features, product functions, product components / genericNumber of units● per CPU / max. 2● note 2 CPs can be inserted for each CPU, simultaneous operation possiblewith BA Send and CM DPpower data / open communicationnumber of connections possible / for open communication ● via T blocks / max. 32 volumes of data.    

Read more less

SIEMENS COMMUNICATION MODULE CM 1542-1 6GK75421AX000XE0 CM 1542-1 communication module for connecting S7-1500 to PROFINET as IO controller or IO device: TCP/IP, ISO on TCP, UDP, S7 communication, IP broadcast multicast, SNMPV1, synchronization hourly via NTP, 2xRJ45 (10/100 Mbit). General information: Baud rateBaud rate● on interface 1 10 ... 100 Mbit/s Interfacesnumber of interfaces / according to Industrial Ethernet 1number of electrical connections● on interface 1 / according to Industrial Ethernet 2connection execution electrical● on interface 1 / according to Industrial Ethernet RJ45 port Supply voltage                                                        current absorbed, power dissipatedtype of voltage / of the supply voltage DCsupply voltage / 1 / from backplane bus 15 Vtolerance relative symmetrical / with DC● with 15 V 3 % Current consumption● from backplane bus / with DC / with 15 V / typ. 0.22 Apower loss [W] 3.3 Wambient conditionsambient temperature● for vertical installation / during operation 0 ... 40 °C● with horizontal installation / during operation 0 ... 60 °C● during storage -40 ... +70 °C● during transport -40 ... +70 °C Relative humidity● at 25 °C / non-condensing / during operation / max. 95 %IP protection class IP20design, dimensions and weightsmodule format Single-width S7-1500 compact modulewidth 35 mmheight 142 mmdepth 129 mmnet weight 0.4 kg Type of fastening● mounting on S7-1500 standard rail Yesproduct features, product functions, product components / genericnumber of units ● per CPU / max. 8● note dependent on CPU type  

Read more less

SIEMENS SIMATIC DP 6ES71513BA230AB0 IM 151-3 PN HF interface module for ET 200S Transmission speed 100 Mbit/s max. 63 peripheral modules Connectable width up to 2m; 2x bus connections via RJ45 incl. closing module. General informationProduct type designation: IM 151-3 PN HF Supply voltage Mains/voltage interruption buffering time: 20 msInput current from supply voltage 1L+, max.: 200 mA Power dissipated Power dissipation, typ.: 3.3 W

Read more less