Siemens 6ES79230BC500CB0unshielded connection cable for SIMATIC S7-300/1500 between connector module and connection module 16x0.14 mm2 with IDC connectors, length = 2.5 m The cable 16-pole round (unshielded) with a length of 2.5 m is the connecting element between the front connector module and the connection module. This pre-assembled cable enables a noise-free and safe signal flow. This makes even complex installations transparent and can be checked in a very short time, which makes maintenance and expansions particularly easy. This pre-assembled connection cable is an integral part of the fully modular connection of SIMATIC TOP connect for faster and safer system cabling. In addition to a reduced cabling effort, a significant reduction in error sources is possible. The sensors and actuators of the I/O are fed to the connection modules of SIMATIC TOP connect and from these, via connection cable and front connector module, connected to the SIMATIC S7-1500.

Read more less

Siemens 6ES79601AA045AA0SIMATIC S7-400H, FO patch cable 1m for synchronization module Accessories for SIMATIC S7-400H

Read more less

Siemens 6GK15710BA000AA0USB PC adapter A2 USB adapter (USB V2.0) for connecting a PG/PC or notebook to SIMATIC S7 via PROFIBUS or MPI including 5m USB cable, cable MPI 0.3m usable in Windows XP/Vista/Windows 7 32/64 bit and higher

Read more less

Schneider Electric VW3M8D1AR50LXM28 5m encoder cable. accessories category: connection accessory - type of accessories: encoder cable - product compatibility: servo motor BCH2 40 mm, servo motor BCH2 60 mm, servo motor BCH2 80 mm - accessories / destination of elements: from servomotor to servodriver - cable composition: 5 x (2 x 0.13 mm²) - cable length: 5 m. Benefits: .. Applications: ..

Read more less

Schneider Electric SR2USB01The Schneider Electric Zelio Logic SR2 USB PC connection cable allows the connection of a Zelio Logic relay to the PC's USB port. It has a length of 3 meters. This USB PC connection cable is ideal for modern computers equipped with a USB port. It integrates with the use of the Zelio Soft 2 programming software.

Read more less

Rockwell Automation 1756-TBCHAccessories and spare parts for Rockwell Automation PLC series/model CONTROLLOGIX 36 PIN SCREW TERMINAL BLOCK

Read more less

Phoenix Contact 1088136Accessories and spare parts for PLC Phoenix Contact Type/model: PHC1088136 - AXL F BP SE6 MODULE HOLDER

Read more less

Rockwell Automation 1769-ECRCOMPACT I/O - RIGHT TERMINATOR

Read more less

Rockwell Automation 2085-ECRExpansion module and end cap for Micro800 series.

Read more less

Siemens 6ES73901AB600AA0SIMATIC S7-300, profile rail, length: 160 mm Profile rails SIMATIC are available in different lengths for direct installation in the control cabinet or for cutting to the desired length. For correct earthing connection, appropriate earthing terminals must be used.

Read more less

Siemens 6ES79711AA000AA0SIMATIC S7, buffer battery (LI) 3.6V/min. 0.85AH, for for CPU S7-300 and S5-90U Accessories for SIMATIC S7-300

Read more less

Schneider Electric LV434210Accessory for Micrologic control unit for Compact NSX and PowerPact multistandard devices. This is a 24 VDC power connector for Micrologic 5 and 6. Allows you to connect an external 24 VDC power supply to Compact NSX and PowerPact devices.

Read more less

Schneider Electric BMXFTB2000Terminal block w/ clamp terminals and 20-way removable cage, 1x0.34..1mm2. product range: Modicon M340 programmable controllers - accessories / element destination: for module with 20-way extractable terminals. Benefits: .. Applications: ..

Read more less

Siemens 6ES73921BM010AA0SIMATIC S7-300, front connector for input/output modules with spring contacts, 40-pin SIMATIC ET 200M is a modular I/O system that can be used universally for the control cabinet in IP20, which can be used as a central I/O on the S7-300 as well as in a distributed structure with a PROFINET or PROFIBUS ET 200M interface module. Up to 12 IO modules can be inserted in each station. The standardized structure of all modules significantly simplifies logistics and spare parts management. Accessories for SIMATIC S7-300

Read more less

Siemens 6ES73921AJ000AA0SIMATIC S7-300, front connector for input/output modules with screw contacts, 20-pin SIMATIC ET 200M is a modular I/O system that can be used universally for the control cabinet in IP20, which can be used as a central I/O on the S7-300 as well as in a distributed structure with a PROFINET or PROFIBUS ET 200M interface module. Up to 12 IO modules can be inserted in each station. The standardized structure of all modules significantly simplifies logistics and spare parts management. Accessories for SIMATIC S7-300

Read more less

Schneider Electric STBXMP1100Modicon STB, Bus termination. product range: Modicon STB distributed I/O solution - accessories category: connection accessories - type of accessories: bus terminator - accessories description: bus terminator - accessories / element destination: bus. Benefits: The open I/O system for device integration. Advantys distributed I/O solutions are simple, open and flexible, to address any type of need at all stages of a product's life cycle. They save time and money by simplifying maintenance and diagnostic tasks.... Applications: Normal conditions for:, Packaging, Bottling, Assembly, Distribution, Textile, Printing, Semiconductor machines..

Read more less

Pilz Italy 793540Accessories and spare parts for PLC Pilz, type/model PIZ793540 - TI CLAMP SET FOR MML2P - SCREW

Read more less

Siemens 6ES73921AM000AA0SIMATIC S7-300, front connector with screw contacts, 40-pole SIMATIC ET 200M is a modular I/O system that can be used universally for control cabinets in IP20, which can be used as central I/O on S7-300 as well as in a distributed structure with a PROFINET or PROFIBUS ET 200M interface module. Up to 12 IO modules can be inserted in each station. The standardized structure of all modules significantly simplifies logistics and spare parts management. Accessories for SIMATIC S7-300

Read more less

Phoenix Contact 1167159

Read more less

Siemens 6ES79720BA420XA0SIMATIC DP, connector for PROFIBUS up to 12 Mbit/s with oblique cable outlet, 15.8x 54x 39.5mm (WxHxD), with terminating resistor with disconnecting function , without socket PG Zubehör für SIMATIC DP

Read more less

Siemens 6ES75921AM000XB0SIMATIC S7-1500, front connector screw terminals, 40-pin of modules with 35 mm width incl. 4 potential jumpers, and cable ties Accessories for S7-1500 modules

Read more less

Siemens 6ES75901AB600AA0SIMATIC S7-1500, profile rail 160 mm (approx. 6.3 inches), incl. Grounding screw, integrated profile rail for mounting small parts e.g. terminals, circuit breaker and relay Profile rails SIMATIC are available in different lengths for direct installation in the control cabinet or for cutting to the desired length. For correct earthing connection, appropriate earthing terminals must be used.

Read more less

Schneider Electric XPSMCMCN0000SGThe XPSMCM backplane expansion connector Schneider Electric is used to connect various expansion modules to the safety controller CPU. This backplane connector provides safe communication between the safe expansion components and the safety controller CPU.

Read more less

Siemens 6ES75921BM000XA0SIMATIC S7-1500, front connector with push-in technology, 40-pin of the 25 mm wide modules and compact CPUs of the S7-1500, incl. cable tie Accessories for S7-1500 modules

Read more less