Siemens 3NW7013SENTRON, fuse holder for cylindrical cartridges, 10x38 mm, 1 pole, In: 32 A, Un AC: 690 V &DPMD_ACC602_001_000_1004330&

Read more less

Abb M200913The compact fuse holders of the E 90h series are available in the 1P+N in one module and 3P+N in three modules versions and are designed for use with cylindrical gG and aM fuses. The body is made of self-extinguishing thermoplastic materials resistant to high temperatures and the contact pliers are made of silver-plated copper. The E 90h fuse holders can be sealed and padlocked for the safety of operators during maintenance. For simple and quick installation, the E 90h range is compatible with the connection bars, caps and connection terminals of the SN201 series circuit breakers.

Read more less

Lovato FB01D1PRated voltage 1000VDC / 690VAC, rated current 32A, use category DC-20B 1000VDC, AC-21B 690V, suitable for 10x38 gPV fuses, maximum section 16mm2 flexible cables, connectable 25mm2 rigid cables .IEC/EN 60947-1, IEC/EN 60947-3 Compliance RoHS Directive Compliance.

Read more less

Italweber 2303137The body of the fuse holder has a modern design and is made of self-extinguishing thermoplastic materials resistant to high temperatures (all materials are UL listed) while the relative contacts are in silver-plated copper. All sectionable fuse holders can be sealed for the safety of operators during maintenance. Fuses must be ordered separately. BCH 38 - Sectionable fuse holders for cylindrical fuses

Read more less

Eaton CH142DUfuse accessories, Fuse holder, Low voltage, 50 A, AC 690 V, 14 x 51 mm, 2P, IEC, replaced by CH142B, C14G Fuses, C14M Fuses, IEC 60269-1

Read more less

Lovato FB03A3NCURUS APPROVED FUSE HOLDER BASE, FOR 22X58MM FUSES. RATED CURRENT 125A (690VAC), 3P+N. WITHOUT INDICATOR LIGHT. 4 MODULES

Read more less

Abb M204733The E 930 fuse disconnectors are specific for the protection of large industrial circuits. The E 930 range can be padlocked in the open position to ensure the safety of operators during maintenance operations, it also supports the installation of MCR microswitches through which it is possible to obtain complete remote monitoring of the device status. the microswitch in fact allows you to signal the intervention of the fuse, the opening of the drawer and the absence of the fuse in the case of a closed drawer. For 10.3 x 38 mm fuses.

Read more less

Eaton CHM3DUFuse Accessories, Fuse Holder, Low Voltage, 32 A, AC 690 V, 10 x 38 mm, 3P, UL, IEC, DIN Rail Mount, Modular, Color Coding. Suitable for use with 75°C or 90°C cable, flexible cable, paddle clamps and combination busbars. Use other cables rated for higher temperatures with appropriate power derating. For cylindrical fuse cartridge, IEC, cULus, CCC, CSA, UR For fuse size: 10×38mm With neutral: FALSE Number of poles: 3

Read more less

Eaton CHPV2UFuse holder for 10x38 cylindrical fuses, for photovoltaic use. 2P 1000VDC.

Read more less

Lovato FB01D2PRated voltage 1000VDC / 690VAC, rated current 32A, use category DC-20B 1000VDC, AC-21B 690V, suitable for 10x38 gPV fuses, maximum section 16mm2 flexible cables, connectable 25mm2 rigid cables .IEC/EN 60947-1, IEC/EN 60947-3 Compliance RoHS Directive Compliance.

Read more less

Siemens 3NW7231SENTRON, fuse holder for cylindrical cartridges, 22x58 mm, 3-pole, In: 100 A, Un AC: 690 V &DPMD_ACC602_001_000_1004330&

Read more less

Italweber 2301137The body of the fuse holder has a modern design and is made of self-extinguishing thermoplastic materials resistant to high temperatures (all materials are UL listed) while the relative contacts are in silver-plated copper. All sectionable fuse holders can be sealed for the safety of operators during maintenance. Fuses must be ordered separately. BCH 38 - Sectionable fuse holders (AC-22B) for cylindrical fuses 10.3X38

Read more less

Abb M204743The compact fuse holders of the E 90h series are available in 1P+N in one module and 3P+N in three modules versions and are designed for use with cylindrical gG and aM fuses. The body is made of self-extinguishing thermoplastic materials resistant to high temperatures and the contact pliers are made of silver-plated copper. The E 90h fuse holders can be sealed and padlocked for the safety of operators during maintenance. For simple and quick installation, the E 90h range is compatible with the connection bars, caps and connection terminals of the SN201 series circuit breakers.

Read more less

Siemens 3NW7023SENTRON, fuse holder for cylindrical cartridges, 10x38 mm, 2-pole, In: 32 A, Un AC: 690 V &DPMD_ACC602_001_000_1004330&

Read more less

Siemens 3NW7063SENTRON, fuse holder for cylindrical cartridges, 10x38 mm, 3P+N, In: 32 A, Un AC: 690 V &DPMD_ACC602_001_000_1004330&

Read more less

Schneider Electric A9N15656These fuse holder bases can accept gG or aM type fuses, with or without indicator • fuse holder drawer: – captive, – isolation by rotation of the drawer, – one housing additional element allows you to position a spare fuse, • provision for fuse intervention signaling by means of a neon lamp (supplied as an accessory), • connection: cage terminals for cables up to 10 mm2, • phase and neutral sectioning in the footprint of only 1 module (18 mm), • displayed isolation: the opening of the phase necessarily involves the opening of the neutral, • the phase, at the moment of isolation, opens before the neutral, while it closes after the neutral when proceeds to re-close the circuit, • compliance with standards: CEI EN 60947-3, • colour: RAL7035).

Read more less

Italweber 2303038The body of the fuse holder has a modern design and is made of self-extinguishing thermoplastic materials resistant to high temperatures (all materials are UL listed) while the relative contacts are in silver-plated copper. All sectionable fuse holders can be sealed for the safety of operators during maintenance. Fuses must be ordered separately. BCH 38 - Sectionable fuse holders for cylindrical fuses

Read more less

Siemens 3NW7053SENTRON, fuse holder for cylindrical cartridges, 10x38 mm, 1P+N, In: 32 A, Un AC: 690 V &DPMD_ACC602_001_000_1004330&

Read more less

Italweber 2342038DDC fuse holder series DCH10 2x38 2P

Read more less

Schneider Electric DF101They are particularly suitable for string protection in photovoltaic systems up to 1000 Vdc and provide a simple, reliable and compact solution thanks to the 10x38 fuses.

Read more less

Eaton C10G2Cylindrical IEC fuse CH10 - 10x38 type gG

Read more less

Abb M204753E 90 fuse switch disconnectors for 10.3 x 38 mm fuses (AC-22B)

Read more less

Italweber 2302038The body of the fuse holder has a modern design and is made of self-extinguishing thermoplastic materials resistant to high temperatures (all materials are UL listed) while the relative contacts are in silver-plated copper. All sectionable fuse holders can be sealed for the safety of operators during maintenance. Fuses must be ordered separately. BCH 38 - Sectionable fuse holders (AC-22B) for cylindrical fuses 10.3X38

Read more less

Italweber 0100500Glass fuses of the 5x20F series, made in a glass tube with nickel-plated brass contacts. They have a rapid tripping curve (F = Fast), and are therefore suitable for the protection of conductors or equipment with small insertion currents. The nameplate data is marked on the metal contacts of the fuse: manufacturer's logo, nominal current and voltage values, acronym indicating the interrupting capacity and any product approvals.

Read more less