Siemens 6SL32101PE233AL0SINAMICS Power Module PM240-2 with filter Class A with integrated brake chopper 3AC 380 ... 480 V +10/-10 % 47 ... 63 Hz high overload power: 11kW at 200% 3s, 150% 57S, 100% 240S ambient temperature -10 ... +50 °C reduced overload power: 15kW at 150% 3 s, 110% 57 s, 100% 240 s ambient temperature -10 .. . +40 °C 355x 140x 165 (HxWxD), FSC protection class IP20 without Control Unit and control panel released by CU, firmware version V4.6 SINAMICS Power Module PM240-2 - The ideal Power Module for standard applications in Machine building for the SINAMICS G120 modular frequency converter. As part of the SINAMICS G120 frequency converter (consisting of power section, control unit, operator panel), the PM240-2 Power Modules (degree of protection IP20) have a braking chopper (four-quadrant applications) and are particularly suitable for numerous applications in general machine building.\nThe PM240-2 power unit can be easily combined with different Control Units depending on the type of application and safety requirements (e.g. STO, SS1, SBC , SLS, SDI, SSM). Together with the CU230-2, CU240x-2 and CU250S-2 Control Units, this results in a fully operational SINAMICS G120 frequency converter. The PM240-2 with IP20 protection rating is a built-in device for electrical cabinets with powers from 0.55 kW to 250 kW and three voltage variants 200 V, 400 V and 690 V. The Power Modules are available without filter or with integrated Class A mains filter and in seven frame sizes, from FSA to FSG. To evacuate the dissipated heat from the control panel, the power section is also available as a Push-Through variant. The frame sizes also offer Safety Integrated functionality. Thanks to the robust design, cable lengths of up to 450 m can be achieved (frame size FSF/FSG). For EMC-compliant wiring, shield plates and connection kits can be used. SINAMICS - the drive for me.

Read more less

Siemens 6SL32101PE118AL1SINAMICS Power Module PM240-2 with filter Class A with integrated brake chopper 3AC 380 ... 480 V +10/-10 % 47 ... 63 Hz high overload power: 0.37kW at 200% 3s, 150% 57S, 100% 240S ambient temperature -10 ... +50 °C low overload power: 0.55kW at 150% 3 s, 110% 57 s, 100% 240 s ambient temperature -10 ... +40 °C 196x 73x 165 (HxWxD), FSA Degree of protection IP20 without Control Unit and control panel approved by CU Firmware version V4.6 Power Module SINAMICS Power Module PM240-2- The ideal Power Module for standard applications in machine building for the SINAMICS G120 modular frequency converter. As part of the SINAMICS G120 frequency converter (consisting of power section, control unit, operator panel), the PM240-2 Power Modules (degree of protection IP20) have a braking chopper (four-quadrant applications) and are particularly suitable for numerous applications in general machine building.\nThe PM240-2 power unit can be easily combined with different control units (Control Units) depending on the type of application and safety requirements (e.g. STO, SS1, SBC, SLS, SDI, SSM). Together with the CU230-2, CU240x-2 and CU250S-2 Control Units, this results in a fully operational SINAMICS G120 frequency converter. The PM240-2 with IP20 protection rating is a built-in device for electrical cabinets with powers from 0.55 kW to 250 kW and three voltage variants 200 V, 400 V and 690 V. The Power Modules are available without filter or with integrated Class A mains filter and in seven frame sizes, from FSA to FSG. To evacuate the dissipated heat from the control panel, the power section is also available as a Push-Through variant. The frame sizes also offer Safety Integrated functionality. Thanks to the robust design, cable lengths of up to 450 m can be achieved (frame size FSF/FSG). For EMC-compliant wiring, shield plates and connection kits can be used. SINAMICS - the drive for me.

Read more less

Siemens 6SL32105FE135UF0SINAMICS V90, with PROFINET input voltage: 380-480 V 3 A - 15 %/+ 10 % 13.8 A 45-66 Hz output voltage: - 0 input 11.0 A 0-330 Hz motor: 3.5 kW degree of protection: IP20 size C: 140x260x240 (WxHxD) SINAMICSV90 servo drive - the servo drive system with optimum performance and user-friendly use for a variety of motion control tasks, in particularly in relation to dynamic movement and processing. The SINAMICS V90 servo converter is designed for connecting the SIMOTICS S-1FL6 servo motor, with which it forms a drive system with an excellent price/performance ratio. This system is characterized by reliable operation, optimal performance and maximum ease of use. With the SIMATIC controller you get an efficient team in the TIA Portal. Depending on the version, you can download the free SINAMICS V-ASSISTANT commissioning tool for quick and easy commissioning. The SINAMICS V90 servo converter is suitable for operation on three-phase networks and covers, with four frame sizes, a power range of 0.4 kW ... 7.0 kW and a voltage range of 380 V ... 480 V. The system can be easily integrated via PTI, PROFINET, USS and Modbus RTU. The SINAMICS V90 servo converter adapts with different options, e.g. connection cables, mains filters, connectors and other accessories, to the specific needs of the user. SINAMICS - the drive for me.

Read more less

Schneider Electric ATV320U75N4CThe Altivar Machine ATV320 range offers variable speed drives designed for machinery and equipment manufacturers (OEMs). The compact form factor allows for vertical stacking of the units within machine frames, the unit operates with a power rating of up to 7.5 kW / 10 hp and a voltage rating of 380V to 500V AC. Its rugged design with PCBs coated to IEC 60721-3-3 class 3C3 allows you to extend the machine's availability in harsh environmental conditions without the need for additional cooling. It integrates functions suitable for the most common applications, Examples: torque and speed precision at very low speed, highly dynamic performance with sensorless flux vector control and wide frequency range for high-speed motors. It also includes parallel connection of motors and special drives using voltage/frequency ratio, static speed accuracy and energy saving for open loop synchronous motors. Weighs 2.2kg, dimensions: 150mm wide, 232mm high, 172mm deep. The Altivar Machine ATV320 meets simple and advanced application requirements for packaging, material handling, textile, materials processing, mechanical actuators and lifting. It complies with IEC, UL, TUV, KC and other international standards. Mounting accessories and external options are also available with Altivar Machine ATV320 drives, such as braking resistors, line chokes, motor chokes, additional EMC filters. The type of accessories and external options depends on the range of the drive. The product is delivered in two packs. It is designed to be mounted on a panel in a vertical position via 4 fixing holes. It is fully integrated into Schneider Electric's EcoStruxure Machine via DTM. You can configure, control and diagnose ATV320 drives directly in SoMachine and SoMove software using the same software brick (DTM). It is environmentally friendly and complies with directives such as RoHS, WEEE, etc. relating to environmental protection.

Read more less

Lovato VLA122A240VLA1 is a compact size drive with high performance. It integrates different motor control modes, such as linear and quadratic V/f and sensorless vector control. It is versatile and can be used in multiple applications such as the management of automatic doors, assembly machines, packaging machines, packaging machines, conveyor belts and in particular for the management of pumps and fans thanks to specific functions such as PID control and on-the-fly speed search . Easy to install and program. The user interface, consisting of a keypad and display mounted on board, allows access to the configuration parameters in an intuitive way thanks to the use of extended texts to describe the functions. Furthermore, with the USB communication module, programming, monitoring and diagnostics can be done via PC with the VLBXSW software, downloadable from the www.LovatoElectric.com website. SPEED REFERENCE SIGNALS: The reference signals for speed regulation occur via: – external potentiometer 0..10kΩ, – analogue voltage signals 0..10VDC or current 0/4..20mA, – buttons on the front keyboard, – door mounting kit, – 15 speeds selectable with digital inputs, – motorized potentiometer. PROGRAMMABLE INPUTS AND OUTPUTS: – selectable pNp or nPn connection, – 5 digital inputs, – 1 digital output, 1 changeover relay output, – 2 analogue inputs: • 1 in voltage 0...10VDC • 1 configurable in voltage 0. ..10VDC or in current 0/4..20mA, – 1 analogue output configurable in voltage 0..10VDC or in current 0/4..20mA. PROTECTIONS: – overcurrent, – output and earth short circuit, – overvoltage, – undervoltage, – phase failure, – motor thermal overload (i2t), – overspeed, – speed reversal. FUNCTIONS: – speed control, – linear or quadratic V/f curves, – open loop vector control, – flying speed search, – DC braking and DC injection at start-up, – integrated PID with sleep and wake thresholds -up, – programmable frequency/time cycles, – different configurations of selectable parameters, – user menu (preferred parameters), – VLBXSW programming and monitoring software, downloadable from the www.LovatoElectric.com website. Operational characteristics: – input voltage: 200...240VAC single phase – rated operational current Ie: 1.7...9.6A – mains frequency: 45...65Hz – output frequency: 0... 599Hz – modulation frequency: 2...16kHz – current overload: 150% for 60s, 200% for 3s – protection degree: IP20 – environmental conditions: • operating temperature: -10...+55°C ( 45°C without derating) • maximum altitude: 4000m (1000m without derating) • relative humidity: 5...95% (without condensation) – side-by-side mounting – integrated EMC filters (EN61800-3), cat. C2 – efficiency class IE2 (EN50598-2). Approvals and compliance: Approvals: cULus, EAC, RCM. Complies with standards: EN61800-5-1, UL61800-5-1, CSA 22.2 No. 274.

Read more less

Rockwell Automation 25B-D4P0N114ROCKWELL AUTOMATION : POWERFLEX 525 1.5KW (2HP) AC DRIVE, Frequency converter

Read more less

Rockwell Automation 22F-D2P5N113PowerFlex 4M inverter • V/Hz control • Small size with pass-through wiring and integrated EMC filter • Integrated RS-485 communication: allows multi-drop configurations (up to 4 additional inverters PowerFlex 4 on a network node) • Integrated programming keypad and local LED status indication • Programmable via DriveExplorer or DriveExecutive (1203-USB required) • Side-by-side mounting Zero-stacking (no distance between drives)

Read more less

Omron Q2AA4103AAA400 V, ND: 103 A / 55 kW, HD: 91 A / 45 kW, IP20, max. output frequency 590 Hz

Read more less

Siemens 6SL32203YE340AF0 SINAMICS G120X rated power: 30 kW with 110 % 60 s, 100 % 240 s radio interference filter for category C2 3AC 380-480 V+10/-20% 47-63 Hz ambient temperature -20 ... +45 ° C size: FSD degree of protection IP20 / UL open Type 3C2 paint finish with Intelligent Operator Panel without expansion IO integrated fieldbus: PROFINET PN, Ethernet IP SINAMICS G120X frequency converters Dominates the elements for applications with pumps/fans, the water sector /wastewater and construction engineering/HVAC. SINAMICS G120X convinces with simple selection and ordering, easy handling, immediate availability out of the box and optimized integration into applications. Simple setup with SINAMICS G120 Smart Access Module or IOP-2 operator panel. SINAMICS G120X is stable in all network conditions, optionally satisfies EMC categories C2 and C1 and is particularly robust thanks to the ability to operate at temperatures between -20 °C and +60 °C. Sector-specific functions such as bypass or pipe filling make this converter particularly efficient. All devices in the construction series are homogeneous and compatible with all voltages and all types of networks, as well as being designed according to the same principles of cost optimization and resource saving. Their compact design saves space in the control cabinet. SINAMICS G120X is available in nine sizes in the power range from 0.75 kW to 630 kW. The SINAMICS G120X frequency converter can be easily commissioned in various ways, e.g. with an external Basic Operator Panel (BOP-2), a Smart Access Module (SAM) or the Intelligent Operator Panel (IOP-2). SINAMICS - the drive that's right for me.

Read more less

Siemens 6SL32203YE280AF0SINAMICS G120X rated power: 15 kW with 110 % 60 s, 100 % 240 s radio interference filter for category C2 3AC 380-480 V+10/-20% 47-63 Hz Ambient temperature -20 ... +45 °C Frame size: FSC Degree of protection IP20 / UL open Type Paint finish 3C2 with Intelligent Operator Panel without expansion Integrated IO fieldbus: PROFINET PN, Ethernet IP SINAMICS G120X frequency converters Dominate the elements for pump/fan applications, water/wastewater and building engineering/HVAC. SINAMICS G120X convinces with simple selection and ordering, easy handling, immediate availability out of the box and optimized integration into applications. Simple setup with SINAMICS G120 Smart Access Module or IOP-2 operator panel. SINAMICS G120X is stable in all network conditions, optionally satisfies EMC categories C2 and C1 and is particularly robust thanks to the ability to operate at temperatures between -20 °C and +60 °C. Sector-specific functions such as bypass or pipe filling make this converter particularly efficient. All devices in the construction series are homogeneous and compatible with all voltages and all types of networks, as well as being designed according to the same principles of cost optimization and resource saving. Their compact design saves space in the control cabinet. SINAMICS G120X is available in nine sizes in the power range from 0.75 kW to 630 kW. The SINAMICS G120X frequency converter can be easily commissioned in various ways, e.g. with an external Basic Operator Panel (BOP-2), a Smart Access Module (SAM) or the Intelligent Operator Panel (IOP-2). SINAMICS - the drive that's right for me.

Read more less

Abb ACS58001046A4JFrequency converter, brand ABB S.P.A. DIVISION DRIVES, model ABDACS58001046A4J - ACS580 TRI 400V 22KW C P IP21

Read more less

Abb ACS58001062A4JFrequency converter, brand ABB S.P.A. DIVISION DRIVES, model ABDACS58001062A4J - ACS580 TRI 400V 30KW C P IP21

Read more less

Omron 3G3M1A4022M1 frequency converter, 2.2/3.0 kW (HD/ND), 5.5/6.9 A (HD/ND), 400 V AC, 3~ input, sensorless vector, max. output frequency 590Hz

Read more less

Schneider Electric ATV630D11N4ATV630 variable speed drive, 11 kW, 380-480 V, IP21/UL type 1. product range: Altivar Process ATV600 - product or component type: variable speed drive - product for specific applications: process and utilities - abbreviated name: ATV630 - variant: standard version - product application: asynchronous motors, synchronous motors - mounting mode: wall mounting - EMC filter: integrated EN/IEC 61800-3 category C2 50 m, integrated EN/IEC 61800-3 category C3 150 m - IP protection degree: IP21 compliant with IEC 60529, IP21 compliant with IEC 61800-5-1 - type of cooling: forced convection - motor power in kW: 11 kW normal use, 7.5 kW heavy duty - motor power in hp: 10 hp heavy duty, 15 hp normal duty - line current: 12.5 A 480 V heavy duty, 14.1 A 380 V heavy duty, 17 A 480 V normal duty , 19.8 A 380 V normal use - Isc prospective line: 50 kA - apparent power: 10.4 kVA 480 V heavy use, 14.1 kVA 480 V normal use - continuous output current: 16.5 A 4 kHz use heavy duty, 23.5 A 4 kHz normal duty - maximum transient current: 24.8 A 60 s heavy duty, 25.9 A 60 s normal duty - asynchronous motor control profile: constant standard torque, variable standard torque, optimized torque mode - synchronous motor control profile: permanent magnet motor - output frequency: 0.0001...0.5 kHz - variable speed drive output frequency: 0.1...599 Hz - nominal switching frequency: 4 kHz - switching frequency: 2...12 kHz adjustable, 4...12 kHz with derating factor - digital input logic: 16 preselected speeds - compatibility: Ethernet, Modbus serial, Modbus TCP - options board: CANopen communication module screw terminals slot A, CANopen communication module SUB-D 9 slot A, communication module CANopen cascade connection RJ45 slot A, DeviceNet communication module slot A, Ethernet IP/Modbus TCP/MD-Link communication module slot A, Modbus TCP/EtherNet/ communication module IP slot A, Profibus DP V1 communication module slot A, Profinet communication module slot A, input/output extension card slot A / slot B, relay output extension card slot A / slot B. Benefits: .. Applications: .. Benefits: Services Oriented Drives. This new inverter concept meets the main needs of the industrial process and utility world in terms of plant efficiency and total cost of ownership, promoting intelligent energy management and improving life cycle management. of assets and also the overall performance of the process:, Sustainable savings thanks to integrated predictive maintenance algorithms, Reduction of plant downtime by up to 20%. Inverter in cabinet with a unique design. Schneider Electric, with its experience in inverter design and applications is able to provide specific solutions for the needs of your process and for the immediate integration of the inverter within the plant:, Minimization of design and delivery critical issues, Optimization of installation and commissioning time. Designed for the most severe conditions. Compact and modular, Altivar Process is a perfect inverter for both retrofits and new installations. It is designed to withstand the most severe conditions of use, from an environmental and electrical point of view. Applications: The Altivar Process ATV600 inverters have been specifically designed for industrial processes, below are some of the possible application areas... Treatment and management of water: pumping and boosting stations, well pumps, lifting, aeration and compression stations, sludge transport...Oil&Gas, Plant: submersible pumps (ESP), extraction pumps, exchange pumps, water injection pumps, regasification compressor…. Oil&Gas, Refinery: pumps, fans, compressors….. Mining and metallurgical industry.., Mining: flotation and thickening processes, drying and filtration, pumps for mine shafts….., Cement: pre-heater fan, gas fan furnace exhaust, vertical roller mill, water supply pump….., Metal: blast furnace blower, pumping system for water distribution, draft fan, extraction systems, coke furnace,…. Food industry: dairy products (management of pumping systems, milk powder drying, centrifugal pumps,…), sugar (pumps, drying fans,…)..

Read more less

Siemens 6SL32101KE238AF1SINAMICS G120C rated power: 18.5kW with 150% overload for 3 sec. 3AC380-480V+10/-20% 47-63Hz integrated class A filter I/O interface: 6DI, 2DO, 1AI, 1AO Integrated Safe-Torque-Off integrated fieldbus: PROFINET PN protection degree IP20/UL Open type size : FSC 295x 140x 225.4 (HxWxD) 24V external SINAMICS G120C frequency converter. Versatile. User-friendly. Compact. For the most diverse applications, such as conveyor belts, mixers, pumps, fans and compressors. With the integrated safety function Safe Torque Off (STO), STO via terminals/PROFIsafe you can do without other external components. Commissioning and operation is done quickly and easily with the PC via USB or via a Basic Operator Panel or an Intelligent Operator Panel or wirelessly via the SINAMICS G120 Smart Access Module. The network connection of the drives takes place via standard fieldbus systems (PROFINET, PROFIBUS) and to make commissioning easier and more intuitive there is a slot for memory cards as standard. To increase energy efficiency, the converter is equipped with precise, energy-optimised SLVC vector control and also features automatic flux reduction. The SINAMICS G120C covers the three-phase 3AC voltage range 380 V ... 480 V and is available in seven frame sizes in capacities from 0.55 kW to 132 kW. The SINAMICS G120C frequency converter adapts itself to specific user requirements with various options. These options include local or mobile operator panels, connecting cables, mains filters, braking resistors, mains reactors and other accessories. Variable speed devices are an integral part of the Totally Integrated Automation (TIA) concept and interface optimally with e.g. with controllers SIMATIC. The SINAMICS G120C universal converter is the successor to the MICROMASTER 420 frequency converter. SINAMICS - the drive for me.

Read more less

Siemens 6SL32105BE275CV0SINAMICS V20 3AC 380 ... 480 V - 15/+ 10 % 47-6 rated power 7.5 kW with 150 % overload for 60 sec. integrated filter C3 I/O interface: 4 DI, 2 DO, 2 AI, 1 AO field bus: USS/MODBUS RTU with built-in BOP protection degree IP20/UL open type dimensions: large. built D 240x207x173 (WxHxD)

Read more less

Schneider Electric ATV12H055M2The Schneider Electric Altivar 12 variable speed drive is capable of powering single-phase asynchronous motors rated at up to 0.55 kilowatts/0.75 horsepower and rated voltage from 200 to 240 Vac. This variable speed/frequency drive (VSD / VFD) is designed for simple industrial and commercial machines and appliances, such as conveyor belts, pumps, extractors, access barriers and rolling mills. Its small footprint allows simple non-industrial equipment to be mounted in cabinets. It can be set up first while still inside its packaging without using the power supply, minimizing setup time. SoMove software compatibility saves and transfers configurations to the spare drive, reducing maintenance downtime.

Read more less

Siemens 6SL32105FE120UF0SINAMICS V90, with PROFINET input voltage: 380-480 V 3 A - 15 %/+ 10 % 9.8 A 45-66 Hz output voltage: - 0 input 7.8 A 0-330 Hz motor: 2.0/2.5 kW degree of protection: IP20 size B: 100x180x220 (WxHxD) SINAMICS V90 servo converter - the servo drive system with optimum performance and user-friendliness for a variety of control tasks motion control, particularly in relation to dynamic motion and machining. The SINAMICS V90 servo converter is designed for connecting the SIMOTICS S-1FL6 servo motor, with which it forms a drive system with an excellent price/performance ratio. This system is characterized by reliable operation, optimal performance and maximum ease of use. With the SIMATIC controller you get an efficient team in the TIA Portal. Depending on the version, you can download the free SINAMICS V-ASSISTANT commissioning tool for quick and easy commissioning. The SINAMICS V90 servo converter is suitable for operation on three-phase networks and covers, with four frame sizes, a power range of 0.4 kW ... 7.0 kW and a voltage range of 380 V ... 480 V. The system can be easily integrated via PTI, PROFINET, USS and Modbus RTU. The SINAMICS V90 servo converter adapts with different options, e.g. connection cables, mains filters, connectors and other accessories, to the specific needs of the user. SINAMICS - the drive for me.

Read more less

Siemens 6SL32440BB131FA0SINAMICS G120 Control Unit CU240E-2 PN-F E-Type Safety integrated STO F-Type SS1, SLS, SSM, SDI PROFINET interface 6DI, 3DO, 2AI, 2AO, max . 3F-DI PTC/KTY interface USB and SD/MMC interface Degree of protection IP20 Ambient temperature 0 ... +50°C without Power Module Control Unit SINAMICS Control Unit CU240E-2 PN-F for basic applications in general building construction machines for the SINAMICS G120 modular frequency converter. The CU240E-2 Control Unit is part of the SINAMICS G120 frequency converter (consisting of power section, control unit, operator panel). The control unit is designed for all common applications with U/f or vector regulation. These include, for example, basic applications without encoders in general machine construction. The CU240E-2 features the integrated Safe Torque Off (STO) safety function as standard. The control unit also integrates the safety functions SS1, SLS, SDI and SSM, for which it has greater application possibilities. The CU240E-2 Control Unit controls and monitors the power part (Power Module) and the motor connected to it with different selectable types of regulation. It allows you to communicate with a local or centralized controller, as well as with monitoring devices, and to connect all process-relevant auxiliary units and external components (sensors, valves, contactors, etc.). The I/O interface, fieldbus interfaces and additional software functions optimally support the application in the broader field of mechanical engineering. To make standard commissioning easier and more intuitive, there is a slot for memory cards with which to clone the parameter sets. By choosing the CU240E-2 the communication interface of the converter is defined. The following communication variants are available: CU240E-2 with USS, Modbus RTU, CU240E-2 DP PROFIBUS and CU240E-2 PN PROFINET, EtherNet/IP protocols. The Control Unit can operate with the following power units: PM240-2 (0.55 kW ... 132 kW) and PM240 (up to 250 kW). SINAMICS - the drive for me.

Read more less

Siemens 6SL32105FE110UF0SINAMICS V90, with PROFINET input voltage: 380-480 V 3 A - 15 %/+ 10 % 3.8 A 45-66 Hz output voltage: - 0 input 3.0 A 0-330 Hz motor: 0.75/1.0 kW degree of protection: IP20 frame size A 80x180x200 (WxHxD) SINAMICS V90 servo drive - the servo drive system with optimal performance and user-friendliness for a variety of control tasks of motion, particularly in relation to dynamic motion and machining. The SINAMICS V90 servo converter is designed for connecting the SIMOTICS S-1FL6 servo motor, with which it forms a drive system with an excellent price/performance ratio. This system is characterized by reliable operation, optimal performance and maximum ease of use. With the SIMATIC controller you get an efficient team in the TIA Portal. Depending on the version, you can download the free SINAMICS V-ASSISTANT commissioning tool for quick and easy commissioning. The SINAMICS V90 servo converter is suitable for operation on three-phase networks and covers, with four frame sizes, a power range of 0.4 kW ... 7.0 kW and a voltage range of 380 V ... 480 V. The system can be easily integrated via PTI, PROFINET, USS and Modbus RTU. The SINAMICS V90 servo converter adapts with different options, e.g. connection cables, mains filters, connectors and other accessories, to the specific needs of the user. SINAMICS - the drive for me.

Read more less

Schneider Electric ATV320D11N4BThe Altivar 320Schneider Electric variable speed drive is capable of powering 3-phase synchronous and asynchronous power motors with a maximum rated power of 11kilowatts/15 horsepower and a rated voltage of 380a 500Vac. This variable speed drive/frequency drive (VSD / VFD) is designed for simple industrial and commercial machines, such as packaging, material handling machinery, mechanical actuators and lifting devices. Its Book form factor helps reduce machine footprint, especially when mounted in an electrical cabinet next to other control devices such as PLCs, I/O units. Advanced connectivity, including CANopen and Modbus, enables deep integration into automation architectures without the use of additional networking equipment.

Read more less

Schneider Electric ATV12H075F1The Schneider Electric Altivar 12 variable speed drive is capable of powering single-phase asynchronous motors with rated power up to 0.75 kilowatts/1 horsepower and rated voltage from 100 at 120 Vac. This variable speed/frequency drive (VSD / VFD) is designed for simple industrial and commercial machines and appliances, such as conveyor belts, pumps, extractors, access barriers and rolling mills. Its small footprint allows simple non-industrial equipment to be mounted in cabinets. It can be set up first while still inside its packaging without using the power supply, minimizing setup time. SoMove software compatibility saves and transfers configurations to the spare drive, reducing maintenance downtime.

Read more less

Schneider Electric ATV320U11M2CThe Altivar 320 variable speed drive Schneider Electric is capable of powering single-phase synchronous and asynchronous power motors rated up to 1.1 kilowatts/1.5 horsepower power and a nominal voltage of 200 to 240 Vac. This variable speed drive/frequency drive (VSD / VFD) is designed for simple industrial and commercial machines, such as packaging, material handling machinery, mechanical actuators and lifting devices. Its compact form factor allows you to reduce machine footprint by vertically stacking units in a machine frame. Advanced connectivity, including CANopen and Modbus, enables deep integration into automation architectures without the use of additional networking equipment.

Read more less

Schneider Electric ATV320U11N4CThe Schneider Electric Altistart 320 soft starter is capable of powering 3-phase asynchronous motors in the network connection with a rated current of 1 ampere, a rated power of 1 .1 to 5 kilowatts and a nominal voltage of 380 to 500 Vac. This variable speed/frequency drive (VSD / VFD) is designed for simple industrial and commercial machines, such as packaging, material handling machinery, mechanical actuators and lifting devices. Its compact form factor allows you to reduce machine footprint by vertically stacking units in a machine frame. Advanced connectivity, including CANopen and Modbus, enables deep integration into automation architectures without the use of additional networking equipment.

Read more less