Siemens 3RT10566AF363PA0power contactor, AC-3 185 A, 90 kW / 400 V AC (50...60 Hz) / DC control UC 110 ... 127 V auxiliary contacts 2 NO + 2 NC lateral, non-removable 3-pole, size S6 busbar connections drive: conventional SIRIUS 3RT1 power contactor for controlling motors.\nThe 3RT1 contactors are an integral part of the SIRIUS modular system with its perfectly matched products among them. They convince with great power in a compact design and high contact reliability. They can be combined in various ways with other components in the starter. The contactors offer the optimal connection to the controller for each application (direct or via PLC input). Integrated auxiliary switch blocks reduce mounting complexity. The 3RT1 contactors are tropicalised, with international approvals (e.g. IEC and UL/CSA) and IE3/IE4ready.\nThese relays are available in different sizes and with a wide power range. They can be controlled in AC or DC, some variants are equipped with a wide voltage range and an input for PLC control. In the main circuit it is possible to connect the devices with busbars or combinable terminals. For the auxiliary and control circuit they are also available with spring-loaded terminals for quick, maintenance-free and vibration-resistant connection.\nNumerous accessories are available for these contactors, such as e.g. wiring kits, which significantly reduce the wiring effort, auxiliary switch blocks or terminal covers.\nSimple, efficient, always up-to-date - the SIRIUS modular system.

Read more less

Schneider Electric LC1D256BLLow consumption contactor for controlling motors and electrical loads, built-in NC and NO contacts and possibility of additional contacts to be positioned frontally or laterally.

Read more less

Siemens 3RT25182AF00contactor, 2 NO+2 NC, AC-3, 7.5 kW, AC 110 V, 50/60 Hz, 4-pole, 2 NO+2 NC, size design S00, spring terminals SIRIUS 3RT25 contactor for pole switching with lifting motors or for controlling two separate loads.\nThe 3RT25 contactors are an integral part of the SIRIUS modular system with its products perfectly coordinated with each other. They convince with great power in a compact design and high contact reliability. It is possible to combine them in many ways with other components in the startup. Many of the device combinations are already tested at the factory. The contactors offer the optimal connection to the controller for every application (parallel, via AS-i or IO-Link). Integrated auxiliary switch blocks reduce mounting complexity. Front connections simplify wiring. The 3RT25 contactors are tropicalised and have international approvals (e.g. IEC and UL/CSA).\nThey are available in various sizes and in a wide power range for AC and DC control. The devices are available not only with screw terminals but also with spring-loaded terminals for quick, maintenance-free and vibration-resistant connection.\nThe wide range of accessories such as e.g. the auxiliary contact blocks, the auxiliary releases etc. is uniformly suitable for all construction sizes.\nSimple, efficient, always up-to-date - the SIRIUS modular system.

Read more less

Schneider Electric LC1DT40U7LC1DT40U7 is a 4-pole TeSys D contactor from Schneider Electric for AC-1 load applications up to 40A/690V. It provides a 240V 50/ AC coil 60 Hz, integrated auxiliary contacts 1NO+1NC (NC mirror contact), power and control connections via screw terminals. Compact (45 mm wide), DIN rail mounting, for high operating speeds of up to 3,600 cycles/hour, guarantees high reliability and resistance. Available worldwide, it is certified to multiple standards (IEC, UL, CSA, CCC, EAC, for use in marine environments) and is Green Premium compliant (RoHS/REACH).

Read more less

Schneider Electric LC1D80SDTeSys LC1D contactor, 3 poles, AC3 440V 80A, 72 V DC. range: TeSys - product name: TeSys D - type of product or component: contactor - abbreviated name: LC1D - contactor application: resistive load, motor control - utilization category: AC-1, AC-3, AC-4 - number of poles: 3P - pole contact composition: 3 NO - Rated operational voltage [Ue]:

Read more less

Schneider Electric LC1D65AEDLC1D65AED is a 3-pole TeSys D contactor from Schneider Electric for motor applications up to 30 kW at 400 V. It includes a 48 V DC coil and integrated 1NO+ auxiliary contacts 1NC, can be used in all control systems and safety applications thanks to the certified NC mirror contact. Compact, with DIN rail mounting, it guarantees high reliability and durability. Available worldwide, it is certified to multiple standards (IEC, UL, CSA, CCC, EAC, for use in marine environments) and is Green Premium compliant (RoHS/REACH).

Read more less

Siemens 3RT10646AV36power contactor, AC-3 225 A, 110 kW / 400 V AC (50 ... 60 Hz) / DC control UC 380 ... 420 V auxiliary contacts 2 NO + 2 NC 3-pole, Size S10 busbar connections Drive: conventional screw terminal SIRIUS 3RT1 power contactor for controlling motors.\nThe 3RT1 contactors are an integral part of the SIRIUS modular system with its products perfectly coordinated between of them. They convince with great power in a compact design and high contact reliability. They can be combined in various ways with other components in the starter. The contactors offer the optimal connection to the controller for each application (direct or via PLC input). Integrated auxiliary switch blocks reduce mounting complexity. The 3RT1 contactors are tropicalised, with international approvals (e.g. IEC and UL/CSA) and IE3/IE4ready.\nThese relays are available in different sizes and with a wide power range. They can be controlled in AC or DC, some variants are equipped with a wide voltage range and an input for PLC control. In the main circuit it is possible to connect the devices with busbars or combinable terminals. For the auxiliary and control circuit they are also available with spring-loaded terminals for quick, maintenance-free and vibration-resistant connection.\nNumerous accessories are available for these contactors, such as e.g. wiring kits, which significantly reduce the effort required for wiring, auxiliary switch blocks or terminal covers.\nSimple, efficient, always up-to-date - the SIRIUS modular system.

Read more less

Schneider Electric LC1D258EDContactor for controlling motors and electrical loads, built-in NC and NO contacts and possibility of additional contacts to be positioned frontally or laterally.

Read more less

Schneider Electric LC1DT32E7LC1DT32E7 is a 4-pole TeSys D contactor from Schneider Electric for AC-1 load applications up to 32A/690V. It provides a 48V 50/ AC coil 60 Hz, integrated auxiliary contacts 1NO+1NC (NC mirror contact), power and control connections via screw terminals. Compact (45 mm wide), DIN rail mounting, for high operating speeds of up to 3,600 cycles/hour, guarantees high reliability and resistance. Available worldwide, it is certified to multiple standards (IEC, UL, CSA, CCC, EAC, for use in marine environments) and is Green Premium compliant (RoHS/REACH).

Read more less

Siemens 3RT20461NB30Power contactor, AC-3 95 A, 45 kW / 400 V 1 NO + 1 NC, AC/DC 20 ... 33 V 3-pole, 3 NO, size S3 screw terminal integrated varistor SIRIUS 3RT2 power contactor for controlling motors.\nThe 3RT2 contactors are an integral part of the SIRIUS modular system with its products perfectly coordinated with each other. They convince with great power in a compact design and high contact reliability. They can be combined in various ways with other components in the starter. Many of the device combinations are already tested at the factory. The contactors offer the optimal connection to the controller for every application (parallel, via AS-i or IO-Link). Integrated auxiliary switch blocks reduce mounting complexity. Front connections simplify simple wiring. The 3RT2 contactors are tropicalized, approved worldwide (e.g. IEC and UL/CSA) and IE3/IE4ready.\nThey are available in various sizes and in a wide power range for AC and DC control. The devices are available not only with screw terminals but also with spring-loaded terminals for quick, maintenance-free and vibration-resistant connection.\nAll accessories such as e.g. the auxiliary contact blocks, the auxiliary releases etc. they are uniformly suitable for all construction sizes. The available connection modules, function modules and the SIRIUS 3RV29 power supply system significantly reduce the wiring effort.\nThe 3RT2 power contactors replace the proven 3RT1 series (up to 55 kW).\nSimple, efficient, always up-to-date - the SIRIUS modular system.

Read more less

Schneider Electric LC1D38P7Contactor for controlling motors and electrical loads, built-in NC and NO contacts and possibility of additional contacts to be positioned frontally or laterally.

Read more less

Siemens 3RT14566AF36contactor, AC-1, 275 A/690 V/40 °C, S6, 3-pole, AC/DC 110 ... 127 V with varistor, 2NO+2NC , connection bar/screw terminals SIRIUS 3RT14 contactor for controlling ohmic loads.\nThe 3RT1 contactors are an integral part of the SIRIUS modular system with its products perfectly coordinated with each other. They convince with great power in a compact design and high contact reliability. It is possible to combine them in many ways with other components in the startup. The contactors offer the optimal connection to the controller for each application (direct or via PLC input). Pre-assembled auxiliary switch blocks reduce the complexity of their assembly. The 3RT1 contactors are tropicalized and have international approvals (e.g. IEC and UL/CSA).\nThese are available in various sizes and with a wide power range. They can be controlled in AC or DC, some variants are equipped with a wide voltage range and an input for PLC control. In the main circuit it is possible to connect the devices via busbars or cable clamps. For the auxiliary and control circuit, they can also be supplied with spring-loaded terminals for quick, maintenance-free and impact-resistant connection.\nNumerous accessories are available for these contactors, such as e.g. wiring kits, which significantly reduce the wiring effort, auxiliary switch blocks or terminal covers.\nSimple, efficient, always up-to-date - the SIRIUS modular system.

Read more less

Schneider Electric LC1G2654LSEASCHNEIDER CONTACT. TESYSG265 4P ADV 200-500V ACDC ALTERNATING CURRENT POWER

Read more less

Schneider Electric LC1G2254LSEASCHNEIDER Contact. TeSysG225 4P Adv 200-500V ACDC ALTERNATING CURRENT POWER

Read more less

Schneider Electric LC1DT60AB7LC1DT60AB7 is a 4-pole TeSys D contactor from Schneider Electric for AC-1 load applications up to 60A/690V. It provides a 24V 50/ AC coil 60 Hz, integrated auxiliary contacts 1NO+1NC (NC mirror contact), power connection via BTR EverLink screw connectors and control via screw terminals. Compact (70 mm wide), DIN rail mounting, for high operating speeds of up to 3,600 cycles/hour, guarantees high reliability and resistance. Available worldwide, it is certified to various standards (IEC, UL, CSA, CCC, EAC, for use in marine environments) and is Green Premium compliant (RoHS/REACH).

Read more less

Schneider Electric LC1D323M7Contactor for controlling motors and electrical loads, built-in NC and NO contacts and possibility of additional contacts to be positioned frontally or laterally.

Read more less

Schneider Electric LC1DT40V7TeSys LC1D contactor, 4 poles, AC1 440V 40A, 400V AC. range: TeSys - product name: TeSys D - type of product or component: contactor - abbreviated name: LC1D - contactor application: resistive load - category of use: AC-1 - number of dipoles: 4P - pole contact composition: 4 NO - Rated operational voltage [Ue]:

Read more less

Schneider Electric LC1DT20F7LC1DT20F7 is a 4-pole TeSys D contactor from Schneider Electric for AC-1 load applications up to 20A/690V. It provides a 110V 50/ AC coil 60 Hz, integrated auxiliary contacts 1NO+1NC (NC mirror contact), power and control connections via screw terminals. Compact (45 mm wide), DIN rail mounting, for high operating speeds of up to 3,600 cycles/hour, guarantees high reliability and resistance. Available worldwide, it is certified to multiple standards (IEC, UL, CSA, CCC, EAC, for use in marine environments) and is Green Premium compliant (RoHS/REACH).

Read more less

Siemens 3RT20161KB42power contactor, AC-3 9 A, 4 kW / 400 V 1 NC, DC 24 V, 0.7-1.25*US with integrated suppressor diode 3 poles, size S00, screw terminals suitable for PLC outputs not expandable with auxiliary switch block. SIRIUS 3RT2 interface contactor for the control of motors and auxiliary and control circuits, especially for direct connection to electronic control devices.\nThe 3RT2 contactors are an integral part of the SIRIUS modular system with its products perfectly coordinated with each other . They convince with great power in a compact design and high contact reliability. They can be combined in various ways with other components in the starter. Many of the device combinations are already tested at the factory. Integrated auxiliary switch blocks reduce mounting complexity. Front connections simplify simple wiring. The 3RT2 contactors are tropicalized, approved worldwide (e.g. IECe UL/CSA) and IE3/IE4ready.\nThe devices are available not only with screw terminals but also with spring-loaded terminals for quick, maintenance-free and vibration-resistant.\nSimple, efficient, always up-to-date - the SIRIUS modular system.

Read more less

Siemens 3RT20232AB00Power contactor, AC-3 9 A, 4 kW / 400 V 1 NO + 1 NC, AC 24 V, 50 Hz 3-pole, size S0 spring terminal SIRIUS 3RT2 power contactor for controlling motors.\nThe 3RT2 contactors are an integral part of the SIRIUS modular system with its products perfectly coordinated with each other. They convince with great power in a compact design and high contact reliability. They can be combined in various ways with other components in the starter. Many of the device combinations are already tested at the factory. The contactors offer the optimal connection to the controller for every application (parallel, via AS-i or IO-Link). Integrated auxiliary switch blocks reduce mounting complexity. Front connections simplify simple wiring. The 3RT2 contactors are tropicalized, approved worldwide (e.g. IEC and UL/CSA) and IE3/IE4ready.\nThey are available in various sizes and in a wide power range for AC and DC control. The devices are available not only with screw terminals but also with spring-loaded terminals for quick, maintenance-free and vibration-resistant connection.\nAll accessories such as e.g. the auxiliary contact blocks, the auxiliary releases etc. they are uniformly suitable for all construction sizes. The available connection modules, function modules and the SIRIUS 3RV29 power supply system significantly reduce the wiring effort.\nThe 3RT2 power contactors replace the proven 3RT1 series (up to 55 kW).\nSimple, efficient, always up-to-date - the SIRIUS. modular system

Read more less

Siemens 3RT20271BB400UA0Contactor, 10 HP, 460 / 575 V, 1 NO + 1 NC, 24 V DC, 3-pole, size S0 screw terminal SIRIUS 3RT2 power contactor for the motor control.\nThe 3RT2 contactors are an integral part of the SIRIUS modular system with its products perfectly coordinated with each other. They convince with great power in a compact design and high contact reliability. They can be combined in various ways with other components in the starter. Many of the device combinations are already tested at the factory. The contactors offer the optimal connection to the controller for every application (parallel, via AS-i or IO-Link). Integrated auxiliary switch blocks reduce mounting complexity. Front connections simplify simple wiring. The 3RT2 contactors are tropicalised, approved worldwide (e.g. IEC and UL/CSA) and IE3/IE4ready.\nThey are available in various sizes and in a wide power range for AC and DC control. The devices are available not only with screw terminals but also with spring-loaded terminals for quick, maintenance-free and vibration-resistant connection.\nAll accessories such as e.g. the auxiliary contact blocks, the auxiliary releases etc. they are uniformly suitable for all construction sizes. The available connection modules, function modules and the SIRIUS 3RV29 power supply system significantly reduce the wiring effort.\nThe 3RT2 power contactors replace the proven 3RT1 series (up to 55 kW).\nSimple, efficient, always up-to-date - the SIRIUS. modular system

Read more less

Schneider Electric LC1K09103B7TeSys K contactor, 3 poles (3NO), for motor control applications up to 9 A/690V AC-3 (4 kW at 400 V) and for motor control applications non-inductive load up to 10 A/ 690V AC-1. It has a 24V AC coil at 50/60 Hz, integrated 1NO auxiliary contacts, connection via spring terminals. For operating speeds up to 600 cycles/hour and environments up to 50°C, it features reliability and resistance to standard applications. Compact (45 mm wide), DIN rail mounting or screw fixing. Certification according to various standards (IEC, UL, CSA, CCC, EAC), Green Premium compliance (RoHS/REACh).

Read more less

Schneider Electric LC1D25KUEThe LC1D25KUE is a 3-pole TeSys D contactor from Schneider Electric for motor applications up to 11 kW at 400 V. It includes a 100-watt AC/DC low-power electronic coil. 250 V and integrated auxiliary contacts 1NO+1NC, can be used in safety applications thanks to the certified NC mirror contact. Compact, with DIN rail mounting, it guarantees high reliability and durability. Available worldwide, it is certified to multiple standards (IEC, UL, CSA, CCC, EAC, for use in marine environments) and is Green Premium compliant (RoHS/REACH).

Read more less

Siemens 3RT20271BB400CC0power contactor, AC-3e/AC-3, 32 A, 15 kW / 400 V, 3-pole, 24 V DC, auxiliary contacts: 1 NO + 1 NC , screw terminals, with communication capability SIRIUS 3RT2 power contactor for controlling motors.\nThe 3RT2 contactors are an integral part of the SIRIUS modular system with its products perfectly coordinated with each other. They convince with great power in a compact design and high contact reliability. They can be combined in various ways with other components in the starter. Many of the device combinations are already tested at the factory. The contactors offer the optimal connection to the controller for every application (parallel, via AS-i or IO-Link). Integrated auxiliary switch blocks reduce mounting complexity. Front connections simplify simple wiring. The 3RT2 contactors are tropicalized, approved worldwide (e.g. IEC and UL/CSA) and IE3/IE4ready.\nThey are available in various sizes and in a wide power range for AC and DC control. The devices are available not only with screw terminals but also with spring-loaded terminals for quick, maintenance-free and vibration-resistant connection.\nAll accessories such as e.g. the auxiliary contact blocks, the auxiliary releases etc. they are uniformly suitable for all construction sizes. The available connection modules, function modules and the SIRIUS 3RV29 power supply system significantly reduce the wiring effort.\nThe 3RT2 power contactors replace the proven 3RT1 series (up to 55 kW).\nSimple, efficient, always up-to-date - the SIRIUS. modular system

Read more less