Siemens 3RT23441AP00contactor, AC-1, 110 A/400 V/40 °C, S3, 4-pole, AC 230 V/50 Hz, 1 NO+1 NC, terminals screw SIRIUS 3RT23 contactor for the control of ohmic loads.\nThe 3RT23 contactors are an integral part of the SIRIUS modular system with its products perfectly coordinated with each other. They convince with great power in a compact design and high contact reliability. It is possible to combine them in many ways with other components in the startup. Many device combinations are already tested at the factory. The contactors offer the optimal connection to the controller (parallel, via AS-i or IO-Link) for every application. Integrated auxiliary switch blocks reduce the complexity of their mounting. Front connections simplify wiring. The 3RT23 contactors are tropicalised and have international approvals (e.g. IEC and UL/CSA).\nThey are available in various sizes and in a wide power range for AC and DC control. The devices are available not only with screw terminals but also with spring-loaded terminals for quick, maintenance-free and impact-resistant connection.\nThe wide range of accessories such as e.g. the auxiliary contact blocks, the auxiliary releases etc. is uniformly suitable for all construction sizes.\nSimple, efficient, always up-to-date - the SIRIUS modular system.

Read more less

Siemens 3RT10556AF363PA0power contactor, AC-3 150 A, 75 kW / 400 V AC (50...60 Hz) / DC control UC 110 ... 127 V auxiliary contacts 2 NO + 2 NC lateral, non-removable 3-pole, size S6 busbar connections drive: conventional SIRIUS 3RT1 power contactor for controlling motors.\nThe 3RT1 contactors are an integral part of the SIRIUS modular system with its perfectly matched products among them. They convince with great power in a compact design and high contact reliability. They can be combined in various ways with other components in the starter. The contactors offer the optimal connection to the controller for each application (direct or via PLC input). Integrated auxiliary switch blocks reduce mounting complexity. The 3RT1 contactors are tropicalised, with international approvals (e.g. IEC and UL/CSA) and IE3/IE4ready.\nThese relays are available in different sizes and with a wide power range. They can be controlled in AC or DC, some variants are equipped with a wide voltage range and an input for PLC control. In the main circuit it is possible to connect the devices with busbars or combinable terminals. For the auxiliary and control circuit they are also available with spring-loaded terminals for quick, maintenance-free and vibration-resistant connection.\nNumerous accessories are available for these contactors, such as e.g. wiring kits, which significantly reduce the wiring effort, auxiliary switch blocks or terminal covers.\nSimple, efficient, always up-to-date - the SIRIUS modular system.

Read more less

Schneider Electric LC1DT40D7LC1DT40D7 is a 4-pole TeSys D contactor from Schneider Electric for AC-1 load applications up to 40A/690V. It provides a 42V 50/ AC coil 60 Hz, integrated auxiliary contacts 1NO+1NC (NC mirror contact), power and control connections via screw terminals. Compact (45 mm wide), DIN rail mounting, for high operating speeds of up to 3,600 cycles/hour, guarantees high reliability and resistance. Available worldwide, it is certified to multiple standards (IEC, UL, CSA, CCC, EAC, for use in marine environments) and is Green Premium compliant (RoHS/REACH).

Read more less

Siemens 3RT20272AL20Power contactor, AC-3 32 A, 15 kW / 400 V 1 NO + 1 NC, AC 230 V 50/60 Hz, 3-pole frame size S0, terminal spring-loaded SIRIUS 3RT2 power contactor for controlling motors.\nThe 3RT2 contactors are an integral part of the SIRIUS modular system with its products perfectly coordinated with each other. They convince with great power in a compact design and high contact reliability. They can be combined in various ways with other components in the starter. Many of the device combinations are already tested at the factory. The contactors offer the optimal connection to the controller for every application (parallel, via AS-i or IO-Link). Integrated auxiliary switch blocks reduce mounting complexity. Front connections simplify simple wiring. The 3RT2 contactors are tropicalized, approved worldwide (e.g. IEC and UL/CSA) and IE3/IE4ready.\nThey are available in various sizes and in a wide power range for AC and DC control. The devices are available not only with screw terminals but also with spring-loaded terminals for quick, maintenance-free and vibration-resistant connection.\nAll accessories such as e.g. the auxiliary contact blocks, the auxiliary releases etc. they are uniformly suitable for all construction sizes. The available connection modules, function modules and the SIRIUS 3RV29 power supply system significantly reduce the wiring effort.\nThe 3RT2 power contactors replace the proven 3RT1 series (up to 55 kW).\nSimple, efficient, always up-to-date - the SIRIUS. modular system

Read more less

Siemens 3TF68440CQ7 contactor, size 14, 3-pole, AC-3, 335kW, 400/380V (690V) auxiliary switch block 44 (4NO+4NC) AC control AC 380...460V 50/60Hz Vacuum contactor 3TF6 for the control of motors.\nThe 3TF6 vacuum contactors convince with high power in a compact design and high contact reliability. They are also characterized by a particularly long lifespan. They are therefore particularly suitable for frequent maneuvers in pulse operation. Pre-assembled auxiliary switch blocks reduce the complexity of their assembly. The devices have international approvals (e.g. IEC and UL/CSA) and are IE3/IE4 ready.\nThey are available in two sizes, with AC and DC control and in a wide power range. In the main circuit it is possible to connect the devices via busbars.\nMany accessories are available for these contactors, such as e.g. surge limiters, auxiliary switch blocks or terminal covers.

Read more less

Schneider Electric LC1D25P7TQSCHNEIDER CONTACTOR 25A 230VAC ALTERNATING CURRENT POWER

Read more less

Siemens 3RT20181AN21Power contactor, AC-3 16 A, 7.5 kW / 400 V 1 NO, AC 220 V, 50/60 Hz 3-pole, size S00 terminal a screw SIRIUS 3RT2 power contactor for controlling motors.\nThe 3RT2 contactors are an integral part of the SIRIUS modular system with its products perfectly coordinated with each other. They convince with great power in a compact design and high contact reliability. They can be combined in various ways with other components in the starter. Many of the device combinations are already tested at the factory. The contactors offer the optimal connection to the controller for every application (parallel, via AS-i or IO-Link). Integrated auxiliary switch blocks reduce mounting complexity. Front connections simplify simple wiring. The 3RT2 contactors are tropicalized, approved worldwide (e.g. IEC and UL/CSA) and IE3/IE4ready.\nThey are available in various sizes and in a wide power range for AC and DC control. The devices are available not only with screw terminals but also with spring-loaded terminals for quick, maintenance-free and vibration-resistant connection.\nAll accessories such as e.g. the auxiliary contact blocks, the auxiliary releases etc. they are uniformly suitable for all construction sizes. The available connection modules, function modules and the SIRIUS 3RV29 power supply system significantly reduce the wiring effort.\nThe 3RT2 power contactors replace the proven 3RT1 series (up to 55 kW).\nSimple, efficient, always up-to-date - the SIRIUS. modular system

Read more less

Schneider Electric LC1D115Q7TeSys LC1D contactor, 3 poles, AC3 440V 115A, 380 V AC. range: TeSys - product name: TeSys D - type of product or component: contactor - abbreviated name: LC1D - contactor application: resistive load, motor control - utilization category: AC-1, AC-3, AC-4 - number of poles: 3P - pole contact composition: 3 NO - Rated operational voltage [Ue]:

Read more less

Siemens 3RT23261AP004AA0contactor, AC-3, 32 A/15 kW/400 V, S0, 4-pole, AC 230 V/50 Hz, 1 NO+1 NC, screw terminals SIRIUS 3RT23 contactor for the control of ohmic loads.\nThe 3RT23 contactors are an integral part of the SIRIUS modular system with its products perfectly coordinated with each other. They convince with great power in a compact design and high contact reliability. It is possible to combine them in many ways with other components in the startup. Many device combinations are already tested at the factory. The contactors offer the optimal connection to the controller (parallel, via AS-i or IO-Link) for every application. Integrated auxiliary switch blocks reduce the complexity of their mounting. Front connections simplify wiring. The 3RT23 contactors are tropicalised and have international approvals (e.g. IEC and UL/CSA).\nThey are available in various sizes and in a wide power range for AC and DC control. The devices are available not only with screw terminals but also with spring-loaded terminals for quick, maintenance-free and impact-resistant connection.\nThe wide range of accessories such as e.g. the auxiliary contact blocks, the auxiliary releases etc. is uniformly suitable for all construction sizes.\nSimple, efficient, always up-to-date - the SIRIUS modular system.

Read more less

Schneider Electric LC1D183BLLC1D183BL is a 3-pole TeSys D contactor from Schneider Electric for motor applications up to 7.5 kW at 400 V. It provides a low-power 24 V DC coil, integrated auxiliary contacts 1NO+1NC (NC mirror contact) and connection via spring terminal. Compact, with DIN rail mounting, it guarantees high reliability and durability. Available worldwide, it is certified to multiple standards (IEC, UL, CSA, CCC, EAC, Marine) and compatible with Green Premium (RoHs/Reach).

Read more less

Schneider Electric LP1SK0600JDTeSys SK mini contactor, 2 poles (2NO). Suitable for non-inductive load applications up to 12 A/690V AC-1 and for 1-phase motor control applications up to 6 A/690V AC-3 (for 3-phase motors, an additional contact block LA1SK must be fitted on the contactor). It has a 12V DC control circuit without inrush consumption, connection via screw terminals. For operating speeds of up to 1200 cycles/hour and ambient temperatures -20/+50°C, it guarantees high reliability and durability. Compact (27 mm wide), for mounting on 35 mm DIN rail. Additional LA1SK contact blocks (power pole, instantaneous auxiliary contacts) and LA4SK snubber modules available to order separately. Certification according to various standards (IEC, UL, CSA, CCC, EAC), Green Premium compliance (RoHS/REACh).

Read more less

Schneider Electric LC1D09JLLow consumption contactor for controlling motors and electrical loads, built-in NC and NO contacts and possibility of additional contacts to be positioned frontally or laterally.

Read more less

Siemens 3RT20371AH00power contactor, AC-3e/AC-3, 65 A, 30 kW / 400 V, 3-pole, AC 48 V, 50 Hz, auxiliary contacts: 1 NO + 1 NC, screw terminals SIRIUS 3RT2 power contactor for controlling motors.\nThe 3RT2 contactors are an integral part of the SIRIUS modular system with its products perfectly coordinated with each other. They convince with great power in a compact design and high contact reliability. They can be combined in various ways with other components in the starter. Many of the device combinations are already tested at the factory. The contactors offer the optimal connection to the controller for every application (parallel, via AS-i or IO-Link). Integrated auxiliary switch blocks reduce mounting complexity. Front connections simplify simple wiring. The 3RT2 contactors are tropicalized, approved worldwide (e.g. IEC and UL/CSA) and IE3/IE4ready.\nThey are available in various sizes and in a wide power range for AC and DC control. The devices are available not only with screw terminals but also with spring-loaded terminals for quick, maintenance-free and vibration-resistant connection.\nAll accessories such as e.g. the auxiliary contact blocks, the auxiliary releases etc. they are uniformly suitable for all construction sizes. The available connection modules, function modules and the SIRIUS 3RV29 power supply system significantly reduce the cabling effort.\nThe 3RT2 power contactors replace the proven 3RT1 series (up to 55 kW).\nSimple, efficient, always up-to-date - the SIRIUS. modular system

Read more less

Siemens 3TF69440CQ7contactor, size 14, 3-pole, AC-3, 450kW, 400/380V (690V) auxiliary switch block 44 (4NO+4NC) AC control AC 380. ..460V 50/60Hz 3TF6 vacuum contactor for controlling motors.\nThe 3TF6 vacuum contactors convince with high power in a compact design and high contact reliability. They are also characterized by a particularly long lifespan. They are therefore particularly suitable for frequent maneuvers in pulse operation. Pre-assembled auxiliary switch blocks reduce the complexity of their assembly. The devices have international approvals (e.g. IEC and UL/CSA) and are IE3/IE4 ready.\nThey are available in two sizes, with AC and DC control and in a wide power range. In the main circuit it is possible to connect the devices via busbars.\nMany accessories are available for these contactors, such as e.g. surge limiters, auxiliary switch blocks or terminal covers.

Read more less

Siemens 3RT24461AP00contactor, AC-1, 140 A/690 V/40 °C, S3, 3-pole, AC 230 V/50 Hz, 1 NO+1 NC, cable clamps /screw terminals SIRIUS 3RT24 contactor for controlling ohmic loads (AC-1).\nThe 3RT24 contactors are an integral part of the SIRIUS modular system with its products perfectly coordinated with each other. They convince with great power in a compact design and high contact reliability. It is possible to combine them in many ways with other components in the startup. Many device combinations are already tested at the factory. The contactors offer the optimal connection to the controller (parallel, via AS-i or IO-Link) for every application. Integrated auxiliary switch blocks reduce the complexity of their mounting. Front connections simplify wiring. The 3RT24 contactors are tropicalized and have international approvals (e.g. IEC and UL/CSA).\nThey are available in various sizes and with a wide power range for AC and DC control with screw terminals.\nThe wide range of accessories such as the auxiliary contact blocks, the auxiliary releases etc. is uniformly suitable for all construction sizes.\nSimple, efficient, always up-to-date - the SIRIUS modular system.

Read more less

Schneider Electric LC1D65008F7LC1D65008F7 is a 4-pole (2NO+2NC) TeSys D contactor from Schneider Electric for AC-1 load applications up to 80A/690V. Provides an AC coil 110V 50/60Hz, power connections via screw terminals and control via screw terminals. Without integrated auxiliary contacts, side and front mounted auxiliary contact blocks can be added (order separately). For high operating speeds of up to 3,600 cycles/hour, it offers high reliability and resistance. Available worldwide, it is certified to multiple standards (IEC, UL, CSA, CCC, EAC, for use in marine environments) and is Green Premium compliant (RoHS/REACH).

Read more less

Schneider Electric LC1D09R7LC1D09R7 is a 3-pole TeSys D contactor from Schneider Electric for motor applications up to 4 kW at 400 V. It provides a 440 V 50/60 Hz AC coil, contacts integrated auxiliaries 1NO+1NC (NC mirror contact) and connection via screw terminals. Compact, with DIN rail mounting, it guarantees high reliability and durability. Available worldwide, it is certified to multiple standards (IEC, UL, CSA, CCC, EAC, Marine) and compatible with Green Premium (RoHs/Reach).

Read more less

Siemens 3RT20281AN20Power contactor, AC-3 38 A, 18.5 kW / 400 V 1 NO + 1 NC, AC 220 V 50/60 Hz, 3-pole frame size S0 , screw terminal SIRIUS 3RT2 power contactor for controlling motors.\nThe 3RT2 contactors are an integral part of the SIRIUS modular system with its products perfectly coordinated with each other. They convince with great power in a compact design and high contact reliability. They can be combined in various ways with other components in the starter. Many of the device combinations are already tested at the factory. The contactors offer the optimal connection to the controller for every application (parallel, via AS-i or IO-Link). Integrated auxiliary switch blocks reduce mounting complexity. Front connections simplify simple wiring. The 3RT2 contactors are tropicalized, approved worldwide (e.g. IEC and UL/CSA) and IE3/IE4ready.\nThey are available in various sizes and in a wide power range for AC and DC control. The devices are available not only with screw terminals but also with spring-loaded terminals for quick, maintenance-free and vibration-resistant connection.\nAll accessories such as e.g. the auxiliary contact blocks, the auxiliary releases etc. they are uniformly suitable for all construction sizes. The available connection modules, function modules and the SIRIUS 3RV29 power supply system significantly reduce the wiring effort.\nThe 3RT2 power contactors replace the proven 3RT1 series (up to 55 kW).\nSimple, efficient, always up-to-date - the SIRIUS. modular system

Read more less

Schneider Electric LC1D65008E7LC1D65008E7 is a 4-pole (2NO+2NC) TeSys D contactor from Schneider Electric for AC-1 load applications up to 80A/690V. Provides an AC coil 48V 50/60Hz, power connections via screw terminals and control via screw terminals. Without integrated auxiliary contacts, side and front mounted auxiliary contact blocks can be added (order separately). For high operating speeds of up to 3,600 cycles/hour, it offers high reliability and resistance. Available worldwide, it is certified to multiple standards (IEC, UL, CSA, CCC, EAC, for use in marine environments) and is Green Premium compliant (RoHS/REACH).

Read more less

Siemens 3RT23261AB00contactor, AC-1, 40 A/400 V/40 °C, S0, 4-pole, AC 24 V/50 Hz, 1 NO+1 NC, terminals screw SIRIUS 3RT23 contactor for the control of ohmic loads.\nThe 3RT23 contactors are an integral part of the SIRIUS modular system with its products perfectly coordinated with each other. They convince with great power in a compact design and high contact reliability. It is possible to combine them in many ways with other components in the startup. Many device combinations are already tested at the factory. The contactors offer the optimal connection to the controller (parallel, via AS-i or IO-Link) for every application. Integrated auxiliary switch blocks reduce the complexity of their mounting. Front connections simplify wiring. The 3RT23 contactors are tropicalised and have international approvals (e.g. IEC and UL/CSA).\nThey are available in various sizes and in a wide power range for AC and DC control. The devices are available not only with screw terminals but also with spring-loaded terminals for quick, maintenance-free and impact-resistant connection.\nThe wide range of accessories such as e.g. auxiliary contact blocks, auxiliary releases etc. is uniformly suitable for all construction sizes.\nSimple, efficient, always up-to-date - the SIRIUS modular system.

Read more less

Siemens 3RT10566SP36power contactor, AC-3 185 A, 90 kW / 400 V coil AC 50/60 Hz and DC 200-277 V x (0.8-1.1) PLC F 24 V DC input 3-pole size S6 auxiliary contacts 2 NO + 2 NC main circuit: busbar control circuit and auxiliary circuit: screw terminal SIRIUS 3RT1 power contactor for controlling high-power motors, specially designed and certified for simple implementation of safety applications up to SIL CL 3.\nThe 3RT1 contactors are an integral part of the SIRIUS modular system with its perfectly coordinated products. They convince with great power in a compact design and high contact reliability. It is possible to combine them in many ways with other components in the startup. For safety applications the contactors offer the optimal connection to the controller in the form of a fail-safe PLC input. Pre-assembled auxiliary switch blocks reduce mounting complexity. The 3RT1 contactors are tropicalised, have international approvals (e.g. IEC and UL/CSA) and are IE3/IE4ready.\nThe 3RT contactors with fail-safe control are available in various sizes and with a wide power range. They have a wide AC/DC voltage range and an input for PLC control. In the main circuit, the devices can be connected via busbars or cable clamps.\nNumerous accessories are available for these contactors, such as e.g. wiring kits, which significantly reduce the wiring effort, auxiliary switch blocks or terminal covers.\nSimple, efficient, always up-to-date - the SIRIUS modular system.

Read more less

Siemens 3TK15420AP0contactor, AC-1, 4 poles, 800A, Main contacts 4 NO, Auxiliary contacts 2 NO + 2 NC, AC control AC 220-230V 50Hz/AC 240V 60Hz.

Read more less

Siemens 3RH21222GG20auxiliary contactor, 2 NO+2 NC, AC 110 V, 50 / 60 Hz, with full-wave rectifier, size S00, spring terminal SIRIUS 3RH2 auxiliary contactor for the switching of control signals in the control circuit.\nThe SIRIUS 3RH2 contactor relays feature standard-compliant terminal designations and fast, reliable connection technology. Thanks to the multiplication of the outputs, simultaneous switching of multiple auxiliary circuits is possible. All contacts can be supplied with forced guidance for safety applications also as an SUVA variant. The auxiliary contactors are tropicalised, have high contact safety and are suitable for use worldwide thanks to the corresponding approvals (e.g. IEC and UL/CSA).\nThey can be supplied with AC or DC control and are available with screw or spring terminals. The basic design of the contactor auxiliaries is 4-pole and can be expanded to 8-pole with snap-in auxiliary contact blocks.\nThe numerous accessories for the 3RT2 contactors in frame sizes S00 to S3 can also be used for the contactors 3RH2 auxiliary contactors.\nThe 3RH2 auxiliary contactors replace the proven 3RH1 series.\nSimple, efficient, always up-to-date - the SIRIUS modular system.

Read more less

Siemens 3RT24461NB30contactor, AC-1, 140 A/690 V/40 °C, S3, 3-pole, AC/DC 20 ... 33 V, with varistor, 1NO+ 1NC, cable clamp terminals/screw terminals SIRIUS 3RT24 contactor for controlling ohmic loads (AC-1).\nThe 3RT24 contactors are an integral part of the SIRIUS modular system with its products perfectly coordinated with each other. They convince with great power in a compact design and high contact reliability. It is possible to combine them in many ways with other components in the starter. Many device combinations are already tested at the factory. The contactors offer the optimal connection to the controller (parallel, via AS-i or IO-Link) for every application. Integrated auxiliary switch blocks reduce the complexity of their mounting. Front connections simplify wiring. The 3RT24 contactors are tropicalized and have international approvals (e.g. IEC and UL/CSA).\nThey are available in various sizes and with a wide power range for AC and DC control with screw terminals.\nThe wide range of accessories such as the auxiliary contact blocks, the auxiliary releases etc. is uniformly suitable for all construction sizes.\nSimple, efficient, always up-to-date - the SIRIUS modular system.

Read more less