FINDER
-
FINDER 7P2182750020 |
Finder surge arrester (SPD) type 2 | AC single phase - DC three phaseFinder surge arrester (SPD) TYPE 2 | AC single phase - DC three phase 7P2182750020 7P.21 Type 2 (1 varistor) unipolar surge arrester for use in DC applications or single-phase AC low voltage systems. Varistor protection +/– or L/N (GND); –/+ or GND (L/N).Replaceable module. Available with remote contact for signaling the status of the varistor. Features: Suitable for AC and DC systems/applications for protection against induced and switching overvoltages To be installed on the border between the LPZ 1 and LPZ 2 zones Visual indicator of the status of the varistor – working/to be replaced Remote contact signaling of the varistor status. Connector (07P.01) included in the package (depending on versions) Varistor and spark gap modules, replaceable Complies with EN 61643-11:2012 Mounting on 35 mm rail (EN 60715), 17.5 mm per pole Also available in the versions: – 7P.21.8.130.1015 SPD Type 2 unipolar usable in DC applications or low voltage single-phase AC systems Varistor protection +/– or L/N (GND); –/+ or GND (L/N) Replaceable module – 7P.21.8.275.x020 SPD Type 2 unipolar usable in single-phase or three-phase applications (230/400 V) Varistor protection L/N(GND)-GND/(L/N) Replaceable module 7P.21.8.440.x020 SPD Type 2 unipolar for three-phase systems with nominal voltage 400 V AC Varistor protection L/N(GND)-GND/(L/N) Replaceable module Applications Control panels, distributionBedroom light controlSurge protectionApparatus for road use, tunnelsElevators - lifts
€31,00
-
FINDER 7M3884000112 | Finder 80A Bidirectional Multifunctional Three-phase LCD Energy Meter
FINDER BIDIRECTIONAL MULTIFUNCTION THREE-PHASE ENERGY LCD METER 80 A 7M3884000112 The 80A multifunction energy meters Type 7M.38.8.400.0112, Type 7M.38.8.400.0212 and Type 7M.38.8.400.0312 are MID certified devices at 80 A, 70°C for three-phase 3 or 4 wire systems and systems single phase. These meters are the ideal devices for electric vehicle charging stations. They are distinguished by the backlit matrix display, the multifunction touch button and the sliding/removable sealable tamper-proof terminal cover. They allow the display of the total and partial consumed (resettable) and the display of the following instantaneous values: V, A, PF, kW, kVA, kvar, Hz, THD V, THD A, phase angle and flow direction of power. Type 7M.38 is available in versions: 7M.38.8.400.0112 with double S0 pulse output for remote energy control and IR communication interface 7M.38.8.400.0212 with integrated Modbus RS485 and S0 pulse communication port for remote energy control and IR communication interface 7M.38.8.400.0312 with integrated M-Bus and S0 pulse communication port for remote energy control and IR communication interface Other features: Direct connection up to 80 A, double tariff, double pulse output S0 2 MID certified meters for active energy + 2 for reactive energy (national certification), 8 resettable meters Active energy precision class: Class B according to EN 50470-3 (MID) Reactive energy precision class: Class 2 according to EN 62053-23 Protection category II ApplicationsControl panels, distributionControl panelsElectrical energy controlMachine tools or productionApparatus for road use, tunnels Elevators - elevators
€181,60
-
FINDER 7M2482300010 | Finder 40A single-phase KW energy meter only
Finder energy meter 40A Solo KW single phase 7M2482300010 The bidirectional single-phase energy meters with LCD display Type 7M.24.8.230.0001, Type 7M.24.8.230.0010, Type 7M.24.8.230.0210 and Type 7M.24.8.230.0310 are the ideal solution for monitoring domestic consumption/ industrial and specifically they can be used in offices, for photovoltaic systems and for energy metering in campsites. They can be programmed via smartphone thanks to NFC technology, which allows you to read the measured energy even in the absence of the mains. They are also distinguished by the touch navigation and programming button and the power and control terminals with integrated anti-theft lock. Other features: 4 MID certified meters for imported and exported active and reactive energy 8 resettable counters for active, reactive, apparent absolute, imported and exported energy Extensive measurements available: V, I, Pf, f, THD of voltage and current and operating time for preventive maintenance activities Mbus and Modbus RS485 communication protocol ApplicationsControl panels, distributionControl panelsElectrical energy controlMachine tools or productionApparatus for road use, tunnels Elevators - elevators
€58,25
-
FINDER 7M2482300001 |
Finder Energy Meter 40A KW single phase onlyFinder energy meter 40A single-phase kw only 7M2482300001 The bidirectional single-phase energy meters with LCD display Type 7M.24.8.230.0001, Type 7M.24.8.230.0010, Type 7M.24.8.230.0210 and Type 7M.24.8.230.0310 are the ideal solution for monitoring domestic consumption/ industrial and specifically they can be used in offices, for photovoltaic systems and for energy metering in campsites. They can be programmed via smartphone thanks to NFC technology, which allows you to read the measured energy even in the absence of the mains. They are also distinguished by the touch navigation and programming button and the power and control terminals with integrated anti-theft lock. Other features: 4 MID certified meters for imported and exported active and reactive energy 8 resettable counters for active, reactive, apparent absolute, imported and exported energy Extensive measurements available: V, I, Pf, f, THD of voltage and current and operating time for preventive maintenance activities Mbus and Modbus RS485 communication protocol ApplicationsControl panels, distributionControl panelsElectrical energy controlMachine tools or productionApparatus for road use, tunnels Elevators - elevators
€37,95
-
FINDER 786012302402 | Finder Switching power supply 60W 24VDC (2.5A)
FINDER SWITCHING POWER SUPPLY 60W 24VDC (2.5A) 786012302402 The Type 78.60 is a low profile modular power supply with 24 V DC output at 60 W for electrical cabinets. Equipped with ZVS (Zero-voltage-switching) technology and suitable for SELV systems (according to EN 60950). Features: High efficiency (up to 91%) and low stand-by consumption ( Small dimensions: 70 mm (4 modules) wide, 61 mm deep Internal thermal protection, with output shutdown Short circuit protection: Hiccup mode (automatic recovery) Overvoltage protection: Varistor Complies with EN 60950-1 and EN 61204-3 standards ApplicationsBuilding automationElevators - liftsAutomation of awnings, shutters, roller shuttersCranesControl panels, distributionPump control panels
€54,95
-
FINDER 782512302400 | Finder 25W 24VDC 1A switching power supply
FINDER SWITCHING POWER SUPPLY 25W 24VDC 1A 782512302400 Switching power supply power absorption: 56.4 VA. suitable for series installation: yes suitable for safety functions: no width in division units: 2 type of supply voltage: AC/DC power output: 25 W. regulated output voltage: no Electrical connection: screw connection mounting on carrier rail possible: yes wall mounting possible: no stabilized: yes 1st output voltage: 24 V. adjustable output voltage: no nominal supply voltage for AC 50 Hz: 110 to 240 V. nominal supply voltage for DC: 220 V. short-circuit proof: yes performance level according to EN ISO 13849-1: without max. output current 1: 1 A. rated value output voltage 1: 24 V. rated value output current 1: 0.75 A. SIL according to IEC 61508: without Degree of protection: IP20 Features: – Low consumption in stand-by (– Internal thermal protection, with output shutdown– Short circuit protection: Hiccup mode(automatic recovery)– Overvoltage protection: Varistor– Flyback circuit type– Compliant with EN 60950-1 and EN 61204-3 standards– Parallel connection for automaticredundancy: with OR-IN– Dual and series connection– Suitable for mounting on 35 mm rail (EN 60715) Also available in the version78.25….1200 with 12 V DC output, 25 W ApplicationsBuilding automationElevators - liftsAutomation of awnings, shutters, roller shuttersCranesControl panels, distributionPump control panels
€39,30
-
FINDER 782512301200 | Finder 25W 12VDC 2A switching power supply
FINDER SWITCHING POWER SUPPLY 25W 12VDC 2A 782512301200 Switching power supply power absorption: 56 VA. suitable for series installation: yes suitable for safety functions: no width in subdivision units: 2 type of supply voltage: AC/DC power output: 25 W. regulated output voltage: no Electrical connection: screw connection mounting on carrier rail possible: yes wall mounting possible: no stabilized: yes 1st output voltage: 12 V. adjustable output voltage: no nominal supply voltage for AC 50 Hz: 110 to 240 V. nominal supply voltage for DC : 220 V. short-circuit proof: yes performance level according to EN ISO 13849-1: without max. output current 1: 2.1 A. rated value output voltage 1: 12 V. rated value output current 1: 1 A. SIL according to IEC 61508: without Degree of protection: IP20. Features: – Low consumption in stand-by (– Internal thermal protection, with output shutdown– Short circuit protection: Hiccup mode(automatic recovery)– Overvoltage protection: Varistor– Flyback circuit type– Compliant with EN 60950-1 and EN 61204-3 standards– Parallel connection for automaticredundancy: with OR-IN– Dual and series connection– Suitable for mounting on 35 mm rail (EN 60715) Also available in the version78.25….1200 with 12 V DC output, 25 W ApplicationsBuilding automationElevators - liftsAutomation of awnings, shutters, roller shuttersCranesControl panels, distributionPump control panels
€39,30
-
FINDER 781212301200 | Finder 12W 12VDC (1A) switching power supply
FINDER SWITCHING POWER SUPPLY 12W 12VDC (1A) 781212301200 Switching power supply power absorption: 32 VA. suitable for series installation: yes suitable for safety functions: no width in subdivision units: 1 type of supply voltage: AC/DC power output: 12 W. regulated output voltage: yes Electrical connection: screw connection mounting on carrier rail possible: yes wall mounting possible: no stabilized: yes 1st output voltage: 12 V. adjustable output voltage: no nominal supply voltage for AC 50 Hz: 110 to 240 V. nominal supply voltage for DC : 220 V. short-circuit proof: yes performance level according to EN ISO 13849-1: without max. output current 1: 1.25 A. rated value output voltage 1:12 V. rated value output current 1: 1 A. SIL according to IEC 61508: without Degree of protection: IP20 Features: Low stand-by power consumption ( Internal thermal protection, with output shutdown Short circuit protection: Hiccup mode (automatic recovery) Overvoltage protection: Varistor Flyback circuit type Complies with EN 60950-1 and EN 61204-3 standards Parallel connection for automatic redundancy: with OR-IN diode Dual and series connection Suitable for mounting on 35 mm rail (EN 60715) Versions also available:-78.12….1200 with 12 V DC output. 12 W, for general applications with 12 V DC loads-78.12….2402 with 24 V DC output, 12 W, SELV, LED Modular driver with 24 V DC output Applications Building automation Elevators - elevators Automation of awnings, shutters, roller shutters Crane Control panels, distribution Pump control panels
€37,30
-
FINDER 72B110000501 | Finder Dark water float regulator
Finder Dark water float regulator 72B110000501 Type 72.B1 level regulator equipped with a triple sealed chamber float designed for sewage systems with suspended agglomerate residues, industrial waters and lifting systems. Supplied with fixing kit. Features: 1 exchange 10 A (resistive load) 8 A (inductive load) Double or triple sealed chamber resistant to high pressures Cable length 5 m, 10 m, 15 m or 20 m Can be used for both the emptying and filling functions Contact materials AgNi ApplicationsIndustrial washing machinesSwimming pool equipmentWater and liquid control managementBottling machinesMilk processing machinesPump control panels
€64,60
-
FINDER 72A110000501 | Finder Clear water float regulator
Finder Fresh water float regulator 72A110000501 Finder 72A110000501 float regulator suitable for regulating the level of fluids in hydraulic systems and waste water with double watertight chamber with standard 5 m PVC cable. 1 contact 20A. Supplied with counterweight (230 g) with cable gland Features: 1 exchange 10 A (resistive load) 8 A (inductive load) Double or triple sealed chamber resistant to high pressures Cable length 5 m, 10 m, 15 m or 20 m Can be used for both the emptying and filling functions Contact materials AgNi Also available in the version: 72.A1.0000.xx02 – float level regulator with double sealed chamber Type, for food liquids and drinking water, it is suitable for liquids with a high chlorine content and/or high salinity. Supplied with counterweight (230 g) with cable gland, it is made with ACS certified cable and plastic for food use. ApplicationsSwimming pool equipmentIndustrial washing machinesWater and liquid control managementBottling machinesMilk processing machinesControl panels pump command
€27,95
-
FINDER 553490240094 | Finder industrial relay 4 contacts 7A
FINDER INDUSTRIAL RELAY 4 CONTACTS 7A 553490240094 Industrial relay. (A): 7 A. No. of contacts: 4 Contact configuration: CO Contact material: AgNi Electrical connection: push-in fitting Power supply: DC Volt DC: 24 V. monostable polarized Protection category: RT I. Optional: Test button+ LED+diode Accessories: Socket S.94.. Series Features: AC or DC coil Lockable test button and standard mechanical indicator Variant with LED and integrated protection module 94 series sockets for printed circuit, solder or for mounting on 35 mm rail (EN 60715) with Push-in, screw or spring terminals 99 series EMC signaling and protection modules and 86.30 type timer modules Alternative mounting adapters available UL Listing (relay/socket jumper) Cadmium-free contacts Contact material options European Patent ApplicationsAutomation of awnings, shutters, roller shuttersElectricity network control managementShipyardsApparatus for road use, tunnelsCranesSwitches and commutators Control panels, distributionControl panels
€9,85
-
FINDER 553490120094 | Finder Industrial Relay 4 contacts 7A
FINDER INDUSTRIAL RELAY 4 CONTACTS 7A 553490120094 Industrial relay. (A): 7 A. Number of contacts: 4 Contact configuration: CO Contact material: AgNi Electrical connection: push-in fitting Power supply: DC Volt DC: 12 V. monostable polarized Protection category: RT I. Optional: Test button+ LED+diode Accessories: Socket S.94. Series Features: AC or DC coil Lockable test button and standard mechanical indicator Variant with LED and integrated protection module 94 series sockets for printed circuit, solder or for mounting on 35 mm rail (EN 60715) with Push-in, screw or spring terminals 99 series EMC signaling and protection modules and 86.30 type timer modules Alternative mounting adapters available UL Listing (relay/socket jumper) Cadmium-free contacts Contact material options European Patent ApplicationsAutomation of awnings, shutters, roller shuttersElectricity network control managementShipyardsApparatus for road use, tunnelsCranesSwitches and commutators Control panels, distributionControl panels
€9,85