FINDER SWITCHING POWER SUPPLY 50W 12VDC (4.5A) CHARGE. 785012301202 Type 78.50 low profile, high efficiency, modular switching power supply with 12 V DC output at 50 W for electrical panels.It features an adjustable voltage between 12 and 14V and ZVS technology. Features: High efficiency (up to 91%) Low stand-by consumption ( Internal thermal protection, with output shutdown Short circuit protection: Hiccup mode (automatic recovery) Overvoltage protection: Varistor Flyback circuit type ZVS (Zero-voltage-switching) technology, in a quasi-resonant way Complies with EN 60950-1 and EN 61204-3 standards Parallel connection for automatic redundancy: with OR-IN diode Dual and series connection Small dimensions: 70 mm (4 modules) wide, 61 mm deep Suitable for mounting on 35 mm rail (EN 60715) ApplicationsBuilding automationElevators - liftsAutomation of awnings, shutters, shuttersCranesControl panels, distributionPump control panels

Read more less

Finder PLC programmable logic -opta plus verses 8A0490248310 Programmable Logic Relay (PLR) with 8 inputs and 4 outputs. Programmable both with traditional languages ​​(Ladder, FBD, etc.) and with an innovative and open source language (IDE /ARDUINO). Equipped with USB (Type-C port) for programming, data logging and power supply during programming. Available in Lite, Plus, Advanced versions. Opta - Programmable Logic Relay, PLR, 4 outputs, 10 A, DC power supply type, nominal supply voltage 24 V, operation from 10.2 to 27.6 V, Number of inputs: 8 digital/analog inputs, NO contacts (SPST ) - EMR, PLUS version, Modbus RS485, RJ45 and USB port (type C port), ambient temperature from -20 to +55 °C Technical characteristics:DC operating range: 10.2...27.6 VContact configuration: 4 NOConnect: PLUS version, Modbus RS485, RJ45 and USB port (type C port)Nominal contact current: 10 ADimensions: 70x84x56.8 mmProgramming languages: Arduino via IDE, as option IEC-61131-3 (LD - SFC - FBD - ST - IL)Nominal voltage: 24 VAmbient temperature: -20...55 °CNominal contact voltage: 250 V ACType of power supply: DC type of power supply

Read more less

Finder mini relay for printed circuit and plug-in 16A 406190120000 The Type 40.61 mini relay is a device for mounting on PCB or 95 series sockets. Features: 1 Exchange 5.0 mm pitch Terminal length 3.5 mm for PCB mounting Terminal length 5.3 mm for plug-in relay DC coil (650 mW or 500 mW) Compliance with the glow wire test according to EN 60335-1 Protection category:– RT II – flux-proof (Standard)– RT III – washable (Special version)

Read more less

Finder new float level regulator  72C100000201 New space-saving float level controller Type 72.C1.0.000.0201 with 4-wire cable for filling or emptying operation even in domestic applications.Equipped with switch Automatic/Manual, protective bellows, maximum/minimum level float. Supplied with wall or pipe fixing bracket. Emptying/filling function.Suitable in all those situations where the use of a normal float could be compromised by lack of space. rated contacts: 250 V

Read more less

Finder Opta PLC programmable logic relay (PLR) 8A0490248300 OPTA is a Programmable Logic Relay (PLR) with 8 inputs and 4 outputs. Programmable both with traditional languages ​​(Ladder, FBD, etc.) and with an innovative and open source language (IDE /ARDUINO). Equipped with USB (Type-C port) for programming, data logging and power supply during programming. – Lite version with USB (Type-C port), ETH Technical data: Contact configuration: 4 NO Rated current/Max instantaneous current A: 10/15Rated voltage/Max switching voltage V AC: 250/400 Rated load in AC1 VA: 2500Rated load in AC15 (230 V AC) VA: 500Breaking capacity in DC1: 24/110/220 V A 10/0.3/0.12Minimum load switchable mW(V/mA): 300 (5/5) Contact opening/closing time ms: 6/4Standard contact material: AgNi Rated voltage (UN) V DC:  12…24Rated power W: 0.6…2.2 (depending on the type )Operating range V DC: 10.2…27.6

Read more less

Finder industrial mini relay 16A 466180240040 The type 46.61 of Finder is an industrial power mini relay that allows mounting on a socket or direct connection via Faston. Features: 1 exchange 16 A Plug-in terminals/Faston 187 Available with: lockable test button, mechanical indicator and LED 8 mm, 6 kV (1.2/50 μs) insulation between coil and contacts Cadmium-free contacts Series 99 EMC signaling and protection modules and 86.30 type timer modules Alternative mounting adapters available Technical data: Type of electrical connection: ConnectorComplete with socket: noWith removable terminals: no Rated control voltage Us 50Hz AC: 24...24 VRated control voltage Us 60Hz AC: 24...24 VType voltage for the drive: AC Drive polarity: Non-polarizedSwitching type: Monostable Number of NC contacts: 0Number of NO contacts: 0Number of changeover contacts: 1Type of changeover contacts: Single contactWith forced actuation contacts: no Rated current: 16 A    

Read more less

Finder Industrial mini relay 8 - 16 A 466182300040 Mini industrial relay, 1 exchange 16A, with plug-in/Faston 187 terminals. Equipped with AC or DC coil. Available with: lockable test button and mechanical and LED indicator. With Cadmium-free contacts. European patent Technical description: Mini industrial relay, Plug-in terminals/Faston terminals, 1 contact, CO, 16 A, AgNi, AC coil, 230 V, operation from 184 to 253 V, power nominal 1.2 VA, resistance 28000 Ω, consumption 5 mA, holding voltage 184 V, release voltage 46 V, variant: Test button + mechanical indicator, ambient temperature -40 to +70 °C

Read more less

Finder Industrial mini relay 8 - 16 A 466180120040 Mini industrial relay, 1 exchange 16A, with plug-in/Faston 187 terminals. Equipped with AC or DC coil. Available with: lockable test button and mechanical and LED indicator. With Cadmium-free contacts. European patent. Technical description: Mini industrial relay, Plug-in terminals/Faston terminals, 1 contact, CO, 16 A, AgNi, AC coil, 12 V, operation from 9.6 to 13.2 V, power nominal 1.2 VA, resistance 80 Ω, consumption 90 mA, holding voltage 9.6 V, release voltage 2.4 V, variant: Test button + mechanical indicator, ambient temperature -40 to +70 °C

Read more less

FINDER MODULAR MULTIFUNCTION TIMER 12/240V 16A 800102400000 Multifunction & multivoltage modular timer Number of contacts: 1 CO Contact material: AgNi (A): 16 Power supply: AC/DC Volt AC: 240 V. Volt DC: 240 V. suitable for front mounting: no with plug-in base: no remote control possible: no only suitable for remote control: no flashing function with initial pause, fixed time: no flashing function with initial pulse, fixed time: no with semiconductor output: yes ON-delayed function: yes pass-through function with ON delay: yes star/delta function: no time range: from 0.1 to 86400 s. OFF-delayed function: yes Pass-through function with OFF-delay: yes Electrical connection: screw connection suitable for mounting on top rail: yes Degree of protection: IP20. Type 80.01T modular timer, multivoltage and multifunction, with screw terminals. Functions: AI: On delay DI: Interval SW: Symmetrical flasher start ON BE: Switch-off delay with control signal CE: On and off delay with control signal DE: Instantaneous interval with command signal Features: Compliant with standards EN 45545-2 +A1:2016 (protection against fire and smoke), EN 61373 (resistance to shock and vibration, category 1, class B), EN 50155 (resistance to temperature and humidity, class T1) Width 17.5 mm Six time scales from 0.1 s to 24 h High input/output isolation “Blade + cross” casing with regulator, rotary function selectors and time scales, 35 mm bar hook which can be operated with both slotted and Phillips screwdrivers New multivoltage versions with “PWM clever” technology Mounting on 35 mm rail (EN 60715) ApplicationsDoor controlInfotainment message panelsManeuvering desks

Read more less

FINDER SWITCHING POWER SUPPLY FOR OPTA 781212302482 Switching power supply power absorption: 28.2 VA. suitable for series installation: yes suitable for safety functions: no width in subdivision units: 1 type of supply voltage: AC/DC power output: 12 W. regulated output voltage: yes Electrical connection: screw connection mounting on carrier rail possible: yes wall mounting possible: no stabilized: yes 1st output voltage: 24 V. adjustable output voltage: no nominal supply voltage for AC 50 Hz: 110 to 240 V. nominal supply voltage for DC: 220 V. short-circuit proof: yes performance level according to EN ISO 13849-1: without max. output current 1: 0.63 A. rated value output voltage 1: 24 V. rated value output current 1: 0.5 A. SIL according to IEC 61508: without Degree of protection: IP20 Features: Low power consumption in stand-by ( Internal thermal protection, with output shutdown Short circuit protection: Hiccup mode (automatic recovery) Overvoltage protection: Varistor Flyback circuit type Complies with EN 60950-1 and EN 61204-3 standards Parallel connection for automatic redundancy: with OR-IN diode Dual and series connection Suitable for mounting on 35 mm rail (EN 60715) Versions also available:-78.12….1200 with 12 V DC output. 12 W, for general applications with 12 V DC loads-78.12….2402 with 24 V DC output, 12 W, SELV, LED Modular driver with 24 V DC output   ApplicationsBuilding automationElevators - liftsAutomation of awnings, shutters, roller shuttersCranesControl panels, distributionPump control panels

Read more less

FINDER SWITCHING POWER SUPPLY 12W 24VDC (0.5A) 781212302400 Switching power supply power absorption: 28.2 VA. suitable for series installation: yes suitable for safety functions: no width in subdivision units: 1 type of supply voltage: AC/DC power output: 12 W. regulated output voltage: yes Electrical connection: screw connection mounting on carrier rail possible: yes wall mounting possible: no stabilized: yes 1st output voltage: 24 V. adjustable output voltage: no nominal supply voltage for AC 50 Hz: 110 to 240 V. nominal supply voltage for DC: 220 V. short-circuit proof: yes performance level according to EN ISO 13849-1: without max. output current 1: 0.63 A. rated value output voltage 1: 24 V. rated value output current 1: 0.5 A. SIL according to IEC 61508: without Degree of protection: IP20 Features: Low power consumption in stand-by ( Internal thermal protection, with output shutdown Short circuit protection: Hiccup mode (automatic recovery) Overvoltage protection: Varistor Flyback circuit type Complies with EN 60950-1 and EN 61204-3 standards Parallel connection for automatic redundancy: with OR-IN diode Dual and series connection Suitable for mounting on 35 mm rail (EN 60715) Versions also available:-78.12….1200 with 12 V DC output. 12 W, for general applications with 12 V DC loads-78.12….2402 with 24 V DC output, 12 W, SELV, LED Modular driver with 24 V DC output   Applications Building automation Elevators - lifts Automation of awnings, shutters, roller shutters Crane Control panels, distribution Pump control panels

Read more less

FINDER TYPE 40.52 - MINI RELAY FOR PRINTED CIRCUIT 2 changeover contacts for printed circuit and plug-in coil 12V DC contact capacity 8A 405290120000 The Type 40.52 mini relay is a Series 95 socket-mounted printed circuit relay. Equipped with 2 8 A exchanges on printed circuit, 5.0 mm pitch, it is a versatile device suitable for multiple applications such as control panels, control and distribution panels, electronic cards, door and gate opening and much more. Features: Terminal length 3.5 mm for PCB mounting Terminal length 5.3 mm for plug-in relay DC coil (650 mW or 500 mW) Variant with Cadmium-free contacts 8 mm, 6 kV (1.2/50µs) insulation between coil and contacts Compliance with the Glowe wire test according to EN 60335-1 95 series sockets for printed circuit, or for mounting on 35 mm rail (EN 60715) with Push-in, screw or spring terminals Series 99 EMC signaling and protection modules and 86.30 type timer modules Protection category:• RT II – flux proof (Standard)• RT III – washable (Special version) ApplicationsElectromedical, dentistryControl panelsControl panels, distributionToysAutomation of awnings, shutters, shuttersOpening doors and gates Electronic cardsVending machines

Read more less