Description
6SL33101PE337AA0 SIEMENS
SINAMICS G120P Power Module PM330 unfiltered without integrated braking chopper 3AC380 ... 480V+10/-10% 47 ... 63Hz power without overload: 160kW at 150% 60 s, 100% 240s reduced overload power: 200kW at 110% 60s, 100% 240S ambient temperature 0 ... +40 °C 1447x 452x 328 (HxLxP), FSGX protection degree IP20 without Control Unit and BOP control panel approved for CU230P-2 from firmware version V4.6 Power Module SINAMICS Power Module PM330 with protection degree IP20 for industrial applications in the process industry for the SINAMICS G120P frequency converter. The PM330 Power Modules are particularly optimized for simple applications such as the drive of pumps, fans, and compressors with a load characteristic increasing at variable speed. Thanks to the optimal use of energy, they especially meet the high energy efficiency requirements. This is achieved with very high efficiency, proven according to EN 50598, various energy-saving functions, and automatic pulse frequency adjustment. The PM330 Power Modules are standard equipped with an electromagnetic interference filter compliant with the limits set for Category C3 and, thanks to the use of an external network filter, meet the limits for use in the first environment (Cat. C2) according to EN 61800-3. If necessary, different power du/dt filters or a Braking Module can be connected. Additionally, a connection for the intermediate circuit is available as standard. All available system components are perfectly suitable for the PM330. This way, specific customer electrical panel solutions can be safely and reliably realized, reducing the footprint thanks to the compact cabinet structure. The PM330 is also characterized by its robustness and, thanks to the components and coatings resistant to toxic gases, is suitable for installation in aggressive environments. All connectors and internal units are easily accessible. Through the output reactances, variable lengths of motor cables can be realized. Here, series connection is also permitted. The PM330 Power Modules are suitable for connection to grounded TN/TT networks and ungrounded IT networks, but not for 690 V networks with an external grounded conductor. The Control Unit CU230P-2 provided for the PM330 Power Modules does not have special Safety Integrated functions; however, safety functions can be implemented with external electrical panels. The PM330 Power Module with protection degree IP 20 powers motors in a power range from 160 kW to 630 kW. They are available for frame sizes from GX to JX in a three-phase voltage range from 380 V to 690 V. For selecting the suitable Power Module for applications, the following currents must be used. With reduced overload/low overload (LO), the base load current IL and with high overload/high overload (HO) the base load current IH. SINAMICS - the drive that suits me.
