Finder panel electrical socket 7U0082300010 The Type 7U.00 modular panel electrical socket is the ideal device for providing a safe and approved voltage point inside the electrical panel.Suitable for Schuko + Italian Bipasso plug, available in gray (7U) .00.8.230.00×0) and yellow (7U.00.8.230.00×2). There is also a version characterized by LEDs indicating the presence of voltage in the socket. Other features: – Rated voltage: 230 V AC– Rated current: 16 A– Width 45 mm– Mounting on 35 mm rail (EN 60715) ApplicationsControl panelsControl panels, distribution
€8,68
FINDER Surge Discharger (SPD) TYPE 3 275VAC 6KV 3 7P3682752003 Surge arrester, Type 7P.36 type 3 for systems with TT and TN-S neutralSingle-phase applications for built-in installation (503 boxes) and on DIN rail.Allows easy additional protection against surges in existing wall sockets.Y-shaped configuration with acoustic signaling in case of varistor failure and acoustic test function.Equipped with 3 wires of 150 mm length for a direct connection to the socket terminals . Mounting: apparent/recessed with telecommunications contact: no number of poles: 1 max. permanent AC voltage: 275 V. rated impulse leakage current (8/20) (L-N): 3 kA. nominal voltage AC: 230 V. test class type 3: yes protection level L-N: 1.65 kV. signaling in the luminaire: acoustic Degree of protection: IP20 with anti-interference filter: no Features: Protects sensitive electrical and electronic devices from impulse surges Complies with EN 61643-11:2012 ApplicationsControl panelsSurge protectionApparatus for road use, tunnelsElevator - elevatorsControl panels, distribution
€28,13
Finder surge arrester (SPD) type 2 4 poles 20KA | three-phase 7P2482750020 Surge arresters. Mounting: 35 mm blind bar with telecommunications contact: no number of conductors (excluding earth): 4 size: 4 UM max. permanent AC voltage: 275 V. rated impulse leakage current (8/20): 20 kA. nominal voltage AC: 230 V. test class type 2: yes protection level L-N: 1.2 kV. signaling in the device: optical permanent voltage DC max.: 350 V. Degree of protection: IP20 protection level N-PE: 1.5 kV. integrated auxiliary fuse: no mains form DC: no mains form IT: no mains form TN: no mains form TN-C: no mains form TN-S: yes mains form TT: yes other mains forms: no network form TN-C-S: no max. discharge current (8/20): 40 kA. short circuit resistance (Isccr): 50 kA. Replaceable modules, available with remote contact for signaling the status of the varistor. Features: Suitable for 230 V/400 V systems/applications for protection against induced and switching overvoltages To be installed on the border between the LPZ 1 and LPZ 2 zones Visual indicator of varistor status - working/needs replacement Remote contact signaling of the varistor status. Connector (07P.01) included in the package (depending on versions) Replaceable varistor and spark gap modules Complies with EN 61643-11:2012 Mounting on 35 mm rail (EN 60715) ApplicationsControl panels, distributionApparatus for road use, tunnelsElevators - elevatorsControl panelsSurge protection
€95,88
FINDER Surge arrester (SPD) TYPE 2 | PHOTOVOLTAIC SPD class 2 for photovoltaic 1020VDC 15KA 7P2390000015 Surge arresters. Mounting: 35 mm blind bar with telecommunications contact: no number of conductors (excluding earth): 2 size: 3 UM max. permanent AC voltage: 275 V. rated impulse leakage current (8/20): 20 kA. nominal voltage AC: 230 V. test class type 2: yes protection level L-N: 1.2 kV. signaling in the device: optical continuous voltage DC max.: 350 V. Degree of protection: IP20 max. PV voltage: 420 V. N-PE protection level: 1.2 kV. integrated auxiliary fuse: no mains form DC: no mains form IT: no mains form TN: yes mains form TN-C: yes mains form TN-S: no mains form TT: no other mains forms: no network form TN-C-S: yes max. discharge current (8/20): 30 kA. Features: Protects devices and equipment from direct and/or induced overvoltages.Replaceable modules.Available with remote contact for signaling the status of the varistor. Features: Visual indicator of the status of the varistor – in case of failure Remote contact signaling of the status of the varistor in the event of a fault. Connector (07P.01) included in the package (depending on versions) Replaceable modules Complies with prEN 50539-11:2012 Mounting on 35 mm rail (EN 60715) ApplicationsControl panels, distributionControl panelsSurge protectionAppliances for road use, tunnelsElevators - lifts
€62,00
FINDER SPD limiter class 2 single phase 2P 275VAC 1+1 20KA 7P2282750020 Surge arresters. 7P.22 Type 2 (1 varistor + 1gas spark gap) for single-phase TT and TN-S systems with Neutral. L-N varistor protection + N-PE gas spark gap and with replaceable varistor and spark gap modules.Available with remote contact for signaling the varistor status. Mounting: 35 mm blind bar with telecommunications contact: no number of conductors (excluding earth): 2 size: 2 UM max. permanent AC voltage: 275 V. rated impulse leakage current (8/20): 20 kA. nominal voltage AC: 230 V. test class type 2: yes protection level L-N: 1.2 kV. signaling in the luminaire: optical Protection degree: IP20 N-PE protection level: 1.5 kV. integrated auxiliary fuse: no mains form DC: no mains form IT: no mains form TN: no mains form TN-C: no mains form TN-S: yes mains form TT: yes other mains forms: no form of the TN-C-S network: no max. discharge current (8/20): 40 kA. short circuit resistance (Isccr): 50 kA. Features: Suitable for AC and DC systems/applications for protection against induced and switching overvoltages To be installed on the border between the LPZ 1 and LPZ 2 zones Visual indicator of varistor status - working/needs replacement Remote contact signaling of the varistor status. Connector (07P.01) included in the package (depending on versions) Varistor and spark gap modules, replaceable Complies with EN 61643-11:2012 Mounting on 35 mm rail (EN 60715), 17.5 mm per pole ApplicationsControl panels, distributionControl panelsSurge protectionAppliances for road use, tunnelsElevators - lifts
€54,63
Finder Surge arrester (SPD) TYPE 2 | AC single phase - DC three phase 7P2182750020 7P.21 Type 2 (1 varistor) unipolar surge arrester for use in DC applications or single-phase AC low voltage systems. Varistor protection +/– or L/N (GND); –/+ or GND (L/N).Replaceable module. Available with remote contact for signaling the status of the varistor. Features: Suitable for AC and DC systems/applications for protection against induced and switching overvoltages To be installed on the border between the LPZ 1 and LPZ 2 zones Visual indicator of the status of the varistor – working/to be replaced Remote contact signaling of the varistor status. Connector (07P.01) included in the package (depending on versions) Varistor and spark gap modules, replaceable Complies with EN 61643-11:2012 Mounting on 35 mm rail (EN 60715), 17.5 mm per pole Also available in the versions:– 7P.21.8.130.1015 SPD Type 2 unipolar usable in DC applications or low voltage AC single-phase systems Varistor protection +/– or L/N (GND); –/+ or GND (L/N) Replaceable module – 7P.21.8.275.x020 SPD Type 2 unipolar usable in single-phase or three-phase applications (230/400 V) Varistor protection L/N(GND)-GND/(L/N) Replaceable module 7P.21.8.440.x020 SPD Type 2 unipolar for three-phase systems with nominal voltage 400 V AC Varistor protection L/N(GND)-GND/(L/N) Replaceable module ApplicationsControl panels, distributionBedroom light controlSurge protectionApparatus for road use, tunnelsElevators - lifts
€31,00
FINDER BIDIRECTIONAL MULTIFUNCTION THREE-PHASE ENERGY LCD METER 80 A 7M3884000112 The 80A multifunction energy meters Type 7M.38.8.400.0112, Type 7M.38.8.400.0212 and Type 7M.38.8.400.0312 are MID certified devices at 80 A, 70°C for three-phase 3 or 4 wire systems and systems single phase. These meters are the ideal devices for electric vehicle charging stations. They are distinguished by the backlit matrix display, the multifunction touch button and the sliding/removable sealable tamper-proof terminal cover. They allow the display of the total and partial consumed (resettable) and the display of the following instantaneous values: V, A, PF, kW, kVA, kvar, Hz, THD V, THD A, phase angle and flow direction of power. Type 7M.38 is available in versions: 7M.38.8.400.0112 with double S0 pulse output for remote energy control and IR communication interface 7M.38.8.400.0212 with integrated Modbus RS485 and S0 pulse communication port for remote energy control and IR communication interface 7M.38.8.400.0312 with integrated M-Bus and S0 pulse communication port for remote energy control and IR communication interface Other features: Direct connection up to 80 A, double tariff, double pulse output S0 2 MID certified meters for active energy + 2 for reactive energy (national certification), 8 resettable meters Active energy precision class: Class B according to EN 50470-3 (MID) Reactive energy precision class: Class 2 according to EN 62053-23 Protection category II ApplicationsControl panels, distributionControl panelsElectrical energy controlMachine tools or productionApparatus for road use, tunnels Elevators - elevators
€181,60
Finder energy meter 40A Solo KW single phase 7M2482300010 The bidirectional single-phase energy meters with LCD display Type 7M.24.8.230.0001, Type 7M.24.8.230.0010, Type 7M.24.8.230.0210 and Type 7M.24.8.230.0310 are the ideal solution for monitoring domestic consumption/ industrial and specifically they can be used in offices, for photovoltaic systems and for energy metering in campsites. They can be programmed via smartphone thanks to NFC technology, which allows you to read the measured energy even in the absence of the mains. They are also distinguished by the touch navigation and programming button and the power and control terminals with integrated anti-theft lock. Other features: 4 MID certified meters for imported and exported active and reactive energy 8 resettable counters for active, reactive, apparent absolute, imported and exported energy Extensive measurements available: V, I, Pf, f, THD of voltage and current and operating time for preventive maintenance activities Mbus and Modbus RS485 communication protocol ApplicationsControl panels, distributionControl panelsElectrical energy controlMachine tools or productionApparatus for road use, tunnels Elevators - elevators
€58,25
Finder energy meter 40A single-phase kw only 7M2482300001 The bidirectional single-phase energy meters with LCD display Type 7M.24.8.230.0001, Type 7M.24.8.230.0010, Type 7M.24.8.230.0210 and Type 7M.24.8.230.0310 are the ideal solution for monitoring domestic consumption/ industrial and specifically they can be used in offices, for photovoltaic systems and for energy metering in campsites. They can be programmed via smartphone thanks to NFC technology, which allows you to read the measured energy even in the absence of the mains. They are also distinguished by the touch navigation and programming button and the power and control terminals with integrated anti-theft lock. Other features: 4 MID certified meters for imported and exported active and reactive energy 8 resettable counters for active, reactive, apparent absolute, imported and exported energy Extensive measurements available: V, I, Pf, f, THD of voltage and current and operating time for preventive maintenance activities Mbus and Modbus RS485 communication protocol ApplicationsControl panels, distributionControl panelsElectrical energy controlMachine tools or productionApparatus for road use, tunnels Elevators - elevators
€37,92
FINDER SWITCHING POWER SUPPLY 60W 24VDC (2.5A) 786012302402 The Type 78.60 is a low profile modular power supply with 24 V DC output at 60 W for electrical cabinets. Equipped with ZVS (Zero-voltage-switching) technology and suitable for SELV systems (according to EN 60950). Features: High efficiency (up to 91%) and low stand-by consumption ( Small dimensions: 70 mm (4 modules) wide, 61 mm deep Internal thermal protection, with output shutdown Short circuit protection: Hiccup mode (automatic recovery) Overvoltage protection: Varistor Complies with EN 60950-1 and EN 61204-3 standards ApplicationsBuilding automationElevators - liftsAutomation of awnings, shutters, roller shuttersCranesControl panels, distributionPump control panels
€54,93
FINDER SWITCHING POWER SUPPLY 25W 24VDC 1A 782512302400 Switching power supply power absorption: 56.4 VA. suitable for series installation: yes suitable for safety functions: no width in division units: 2 type of supply voltage: AC/DC power output: 25 W. regulated output voltage: no Electrical connection: screw connection mounting on carrier rail possible: yes wall mounting possible: no stabilized: yes 1st output voltage: 24 V. adjustable output voltage: no nominal supply voltage for AC 50 Hz: 110 to 240 V. nominal supply voltage for DC: 220 V. short-circuit proof: yes performance level according to EN ISO 13849-1: without max. output current 1: 1 A. rated value output voltage 1: 24 V. rated value output current 1: 0.75 A. SIL according to IEC 61508: without Degree of protection: IP20 Features: – Low consumption in stand-by (– Internal thermal protection, with output shutdown– Short circuit protection: Hiccup mode(automatic recovery)– Overvoltage protection: Varistor– Flyback circuit type– Compliant with EN 60950-1 and EN 61204-3 standards– Parallel connection for automaticredundancy: with OR-IN– Dual and series connection– Suitable for mounting on 35 mm rail (EN 60715) Also available in the version78.25….1200 with 12 V DC output, 25 W ApplicationsBuilding automationElevators - liftsAutomation of awnings, shutters, roller shuttersCranesControl panels, distributionPump control panels
€39,30
FINDER SWITCHING POWER SUPPLY 25W 12VDC 2A 782512301200 Switching power supply power absorption: 56 VA. suitable for series installation: yes suitable for safety functions: no width in subdivision units: 2 type of supply voltage: AC/DC power output: 25 W. regulated output voltage: no Electrical connection: screw connection mounting on carrier rail possible: yes wall mounting possible: no stabilized: yes 1st output voltage: 12 V. adjustable output voltage: no nominal supply voltage for AC 50 Hz: 110 to 240 V. nominal supply voltage for DC : 220 V. short-circuit proof: yes performance level according to EN ISO 13849-1: without max. output current 1: 2.1 A. rated value output voltage 1: 12 V. rated value output current 1: 1 A. SIL according to IEC 61508: without Degree of protection: IP20. Features: – Low consumption in stand-by (– Internal thermal protection, with output shutdown– Short circuit protection: Hiccup mode(automatic recovery)– Overvoltage protection: Varistor– Flyback circuit type– Compliant with EN 60950-1 and EN 61204-3 standards– Parallel connection for automaticredundancy: with OR-IN– Dual and series connection– Suitable for mounting on 35 mm rail (EN 60715) Also available in the version78.25….1200 with 12 V DC output, 25 W ApplicationsBuilding automationElevators - liftsAutomation of awnings, shutters, roller shuttersCranesControl panels, distributionPump control panels
€39,30
