Schneider-Electric Vigirex RH99P 220/240VAC R.M 56273  RH99P is a front panel mounting differential protection relay. Protects from direct or indirect contact, fire hazards and motors. Measures the differential current in an electrical system across the associated toroid. PresentationRangeVigiPacTDevice nameRH99PProduct type Residual current protection relayrelay applicationProtection relayInstallationFront paneltype of differential protectionType AType of regulationSelectortype of residual differential sensitivity adjustmentAdjustable, 9 valuesEarth-leakage sensitivity0.03…30 AEarth-leakage time delayInstant for 0.03 A Adjustable, 9 values ​​0…4.5 s for 0.03…30 ACurrent sensors compatibilityVigiPacT TOA differential current sensorVigiPacT A differential current sensorVigiPacT L sensor differential current Conventional thermal current in enclosure [Ithe] 8 AMinimum load10 mA at 12 VRated supply voltage [Us]220. ..240 V AC 50/60 Hz 55...110%power consumption VA 4 VAMonitored distribution system1000 V - AC at 50/60 Hz (maximum) 1000 V - AC at 400 Hz (maximum)grounding system

Read more less

Schneider Electric Wireless PowerTag F63A 3PN upstream downstream A9MEM1570 PowerTag Energy F63 1P+N 110V is a wireless communication energy sensor. With its Flex design, it is dedicated to 3P+N devices, with rated current less than or equal to 63 A. It must be associated with a concentrator or gateway to provide circuit monitoring and diagnosis up to the load level. It is designed specifically for energy management, load monitoring and power availability applications. Includes accurate real-time measurements of active energy, active power, and voltage and power factor. In case of power failure, it sends voltage loss alarm and current value per phase before shutting down. PowerTag Energy 63A complies with IEC 61557-12. It's a PMD-i/DD/K55/1. The performance category is class 1. The maximum current of Imax is 63 A. The Base current Ib is 10 A. The saturation current is 130 A and the starting current Ist is 40 mA. The rated voltage Un is phase to neutral from 220VAC to 240VAC +/- 20% and phase to phase from 380VAC to 415VAC +/- 20%. The maximum consumption is less than or equal to 2 VA. It can be mounted on the top or bottom of the protection device. The color of the product is white (RAL 9003). The weight is 40 g. The degree of protection is IP20 and IK05. The operating temperature is between -25°C and +60°C. The storage temperature is between -40°C and +85°C. Mounting System With Screws: (clamps)Electrical Connection (VoltageSensing & Power Supply): Cables with cable endsWire Section: 1 rigid cable 1.5…16 mm²2 stranded cable 1.5…2.5 mm²2 rigid cable 1.5…2.5 mm²1 stranded cable 1.5…16 mm²Cable length: 0 ,25 mSupply Voltage: 220...240 V AC, +/- 20 %, phase to neutral380...415 V AC, +/- 20 %, phase to phaseMains Frequency: 50 Hz60 HzMaximum Power Consumption: 2 VAReference Standards: IEC 61557-12IEC 61010-1IEC 61010-2-030IEC 61326-1ETSI EN 300 328ETSI EN 301 487-1Height Sensing element: 20 mmWidth Sensing element: 54 mmDepth Sensing element: 46.6 mm

Read more less

Schneider-Electric Vigipact 200/440VAC 4P NSX250 LV429493 This is a Vigi differential module for the ComPact NSX 250 which provides earth leakage protection. It is used for 4 pole circuit breakers. PresentationProduct range"ComPacT NSX100...250 new generation""ComPact NSX100...250"Device nameVigiPacTProduct typeVigi add-onApplicationWiringRange compatibility"ComPacT new generation" "ComPacT NSX250 new generation" switch automaticCompact "ComPact NSX250" circuit breakerNumber of poles 4PRated current [In] 250 AType of differential protectionClass AClass ACType of residual differential sensitivity adjustmentAdjustabledifferential sensitivity0.03 A for class A0.1 A for class A0.3 A for class A0.5 A for class A1 A for class A3 A for class A10 A for class AC30 A for class ACResidual earth fault delay adjustment typeAdjustableResidual differential timing adjustment [Δt]0 ms60 ms150 ms300 ms500 ms800 ms1.2 s4 sTechnical characteristicsNetwork typeCAMains frequency50/ 60 Hz[Ue] rated operational voltage200...440 V AC 50/60 Hz conforming to IEC 60947-2differential protectionWith maximum interruption time800 ms overvoltage category IVEnvironmentProtection class against electrical dischargesClass II

Read more less

Schneider-Electric Energy sensor, PowerTag Flex (free mounting) 160A 3P/3P+N upper and lower position energy, PowerTag Flex (free mounting) 160A 3P/3P+N upper and lower position A9MEM1580 PowerTag Energy F160 3P/3P+N is an energy sensor for wireless communication. With its Flex design, it is dedicated to 3P and 3P+N devices, with 25 to 27 mm pitch between phases, with rated current up to 160 A.  PresentationProduct rangePowerLogicProduct namePowerTag F160Product type Monitoring sensorPoles3P3P + NMaximum current [Imax]160 Aproduct for specific applicationsEnergy managementOverload alarmPower factorLoad monitoringCircuit monitoringconcentrator compatibilityActi9 PowerTag Link CActi9 PowerTag LinkActi9 PowerTag Link HDHarmony Hub"EcoStruxure Panel Server Universal""EcoStruxure Panel Server Advanced"PrismaSet Activerange compatibilityActi9 Acti9 C120Acti9 Acti9 NG125 Compact Compact NSXmTeSys TeSys GV4Compact ComPacT INSActi9 Acti9 iSWActi9 Acti9 iSW-NAActi9 Acti9 iIDPowerPact PowerPact Bmeasurement type Active and reactive energyApparent energyActive and reactive powerApparent powerCurrentVoltagePower factorInternal temperatureFrequencyaccuracy classClass 1 active energy conforming to IEC 61557-12Class 2 reactive energy conforming to IEC 61557-12Class 2 apparent energy conforming to IEC 61557- 12Class 1 active power conforming to IEC 61557-12Class 2 reactive power conforming to IEC 61557-12Class 2 apparent power conforming to IEC 61557-12Class 1 current conforming to IEC 61557 -12Class 0.5 voltage conforming to IEC 61557-12Class 1 power factor conforming to IEC 61557-12Class 0.5 frequency conforming to IEC 61557-12

Read more less

Schneider Electric EcoStruxure Panel Server PAS800L  EcoStruxure Panel Server is a gateway that provides the connection of wired or non-wired smart IoT devices to edge control software or cloud application. Connect Schneider Electric wireless devices such as PowerTag Energy, PowerLogic HeatTag, Power Tag Ambiant, Power Tag control, and more. Technical dataPower consumption in W3.5 W 24 V Communication Network TypeEthernet, 10/100BASE-TWi-Fi "2.4 GHz"Wi-Fi "5 GHz"Wireless, "IEEE 802.15.4"Modbus RTU, Modbus RTU client odd/even or no parity, at "1.2...115.2 kbit/s" Communication port protocolModbus TCPDHCPHTTPSNTP/SNTP"IPv4""IPv6"TCP/IP Communication Port Protocol2 RJ45: EthernetScrew Terminal Block: RS485 Number of server32 server device(s)Modbus RTU - without repeater128 server device(s)Modbus RTU - with repeater128 server device(s)Modbus TCP/IP40 server device(s)wireless - mixed85 server device(s)wireless - a seconda della configurazione Number of clients64 Modbus TCP/IP capacità memoria"32 GB" "eMMC"512 MB NAND numero di ingressi2 digitale

Read more less