Omron NXPF0630NX Series, I/O Power Module 5V, 24Vdc

Read more less

Omron NXPD1000NX Series, Module for power supply connection for NX bus 24Vc.c

Read more less

Schneider Electric HMIG3X Schneider Electric type/model GTUX EXREME BOX

Read more less

Schneider Electric BMXXBP1200HHardened M340 rack, 12 slots, panel or plate mount. product range: Modicon M340 programmable controllers - type of accessories: reinforced rack - product for specific applications: for harsh environments. Benefits: .. Applications: ..

Read more less

SIEMENS BASEUNIT TYPE A0, BU15-P16+A10+2B  6ES71936BP200BA0  SIMATIC ET 200SP, Basic unit BU15-P16+A10+2B, BU type A0, Push-in terminals, with 10 aux. terminals, bridged to the left, WxH: 15 mmx141 mm General information:Product type designation BU type A0Hardware version from FS06 Supply voltageRated value (DC) 24 VExternal protection of power cables Yes; DC 24 V / 10 A circuit breaker with tripping characteristic type B or C Current carrying capacityfor busbar P1 and busbar P2, max. 10 Afor AUX bus, max. 10 Afor process terminals, max. 2 A Hardware configurationFormation of potential groups● New potential group No● Potential group continued from left Yes Slot● Number of slots 1; Type A0 InsulationInsulation tested with DC 707 V (Type Test) Environmental conditionsAmbient temperature in operation● Horizontal mounting position, min. -30 °C● Horizontal mounting position, max. 60 °C● Vertical mounting position, min. -30 °C● Vertical mounting position, max. 50 °CAltitude during operation, reference to sea level● Installation altitude max. above sea level 5 000 m; Limitations for installation altitudes > 2 000 m, see manual AccessoriesColor coding labels● for process terminals CC00 ... CC09● for AUX terminals CC71 ... CC73● for additional terminals not availableconnection technology Clamps● Clamp type Push-in clamp● shield connection integrated into the system Yes; opt.● Connection section min. 0.14 mm²; AWG 26● Connection cross-section, max. 2.5mm²; AWG 14● Number of process terminals for the I/O module 16● Number of terminals for the AUX bus 10

Read more less

SIEMENS SIMATIC ET 200SP 6ES7193-6BP20-0DA0 SIMATIC ET 200SP, Basic unit BU15-P16+A10+2D, BU type A0, Push-in terminals, with 10 aux. terminals, new load group, WxH: 15 mmx141 mm. General information Product type designation BU type A0Hardware version From FS07 Supply voltage Rated value (DC) 24 VExternal protection of power cables Yes; DC 24 V / 10 A circuit breaker with tripping characteristic type B or C Current capacity for busbar P1 and busbar P2, max. 10 Afor AUX bus, max. 10 Afor process terminals, max. 2 A Hardware configuration Formation of potential groups● New potential group Yes● Potential group continued from the left No Slot● Number of slots 1; Type A0 Potential separation between potential groups Yes Isolation Insulation tested with DC 707 V (Type Test)

Read more less

SIEMENS SIMATIC ET 200SP 6ES7-193-6BP00-0BA0 Basic unit BU15-P16+A0+2B, BU type A0, Push-in terminals, without aux. terminals, bridged to the left, WxH: 15x 117 mm. General information Product type designation: BU type A0Version Hardware: from FS06 Supply voltage Rated value (DC) 24 VExternal protection of power cables Yes; DC 24 V / 10 A thermal magnetic switch with tripping characteristic type B or C Main filter● integrated No Current range for busbar P1 and busbar P2, max. 10 Afor process terminals, max. 2 A

Read more less

SIEMENS SIMATIC ET 200SP 6ES71936BP000DA0 Basic unit BU15-P16+A0+2D, BU type A0, pushin terminals, without auxiliary terminals, new load group, WxH: 15x 117 mm. General informationProduct type designation: BU type A0Hardware version: from FS06 Supply voltage Rating (DC): 24 VExternal protection of power cables: Yes; DC 24 V / 10 A thermal magnetic switch with tripping characteristic type B or C Current flow for bus P1 and bus P2, max.: 10 Afor process terminals, max.: 2 A Hardware configuration Formation of potential groups● New potential group: Yes● Potential group continued from left: NoSlot● Number of slots: 1; Type A0 Potential separation between potential groups: Yes Isolation Insulation tested with: DC 707 V (Type Test)

Read more less

Rockwell Automation 2085-EP24VDCROCKWELL AUTOMATION : MICRO800 EXPANSION MODULE POWER SUPPLY, PLC Starter kit

Read more less

Siemens 6ES79538LG310AA0SIMATIC S7, Micro Memory card for S7-300/C7/ET 200, 3, 3V Nflash, 128 kbyte The necessary memories are offered for SIMATIC S7-300 in different sizes.

Read more less

Siemens 6ES79538LF310AA0SIMATIC S7, Micro Memory card for S7-300/C7/ET 200, 3, 3V Nflash, 64 kbyte The necessary memories are offered for SIMATIC S7-300 in different sizes.

Read more less

Siemens 6ES79538LJ310AA0SIMATIC S7, Micro Memory card for S7-300/C7/ET 200, 3, 3V Nflash, 512 kbyte The necessary memories are offered for SIMATIC S7-300 in different sizes.

Read more less

Siemens 6ES79538LP310AA0SIMATIC S7, Micro Memory card for S7-300/C7/ET 200, 3, 3V Nflash, 8 MB The necessary memories are offered for SIMATIC S7-300 in different sizes.

Read more less

Siemens 6ES79548LL030AA0SIMATIC S7, Memory Card for S7-1x00 CPU, 3, 3V Flash, 256 MB SIMATIC S7-1200 Basic Controller - flexible thanks to multiple communication options and SIMATIC S7-1500 Advanced Controller - the fastest Siemens controller for automation. For the SIMATIC S7-1200/S7-1500 family, SIMATIC Memory Cards are offered as optional or necessary accessories in different sizes.

Read more less

Siemens 6ES79548LF030AA0SIMATIC S7, Memory Card for S7-1x00 CPU/SINAMICS, 3, 3V Flash, 24 MB SIMATIC S7-1200 Basic Controller - flexible thanks to multiple options for communication and SIMATIC S7-1500 Advanced Controller - the fastest Siemens controller for automation. For the SIMATIC S7-1200/S7-1500 family, SIMATIC Memory Cards are offered as optional or necessary accessories in different sizes.

Read more less

Siemens 6ES79548LC030AA0SIMATIC S7, Memory Card for S7-1x 00 CPU/SINAMICS, 3, 3V Flash, 4 MB SIMATIC S7-1200 Basic Controller - flexible thanks to numerous options communication and SIMATIC S7-1500 Advanced Controller - the fastest Siemens controller for automation. For the SIMATIC S7-1200/S7-1500 family, SIMATIC Memory Cards are offered as optional or necessary accessories in different sizes.

Read more less

Siemens 6ES79548LE030AA0SIMATIC S7, Memory Card for S7-1x00 CPU/SINAMICS, 3, 3V Flash, 12 MB SIMATIC S7-1200 Basic Controller - flexible thanks to multiple options for communication and SIMATIC S7-1500 Advanced Controller - the fastest Siemens controller for automation. For the SIMATIC S7-1200/S7-1500 family, SIMATIC Memory Cards are offered as optional or necessary accessories in different sizes.

Read more less

Siemens Simatic S7, Memory Card for S7-1x 00 CPU 6ES79548LP030AA0 SIMATIC S7, Memory Card for S7-1x 00 CPU, 3, 3V Flash, 2 Gbyte. General informationProduct type designation SIMATIC Memory CardMemoryMemory type Flash-EPROMFlash YesMemory capacity 2 GBNumber of erase/write operations, min. 100 000Data retention (after last programming), min. 10 a; For erase/write operations erase/write operations > 90 000)DimensionsWidth 24 mmHeight 32 mmDepth 2.1 mmWeightsWeight, approx. 3 g

Read more less

Siemens 6ES76587BA002YB0SIMATIC Logon, Remote Access software for 3 clients, (WinCC flexible AB 2007 or WinCC TIA Portal), Single License for 1 E-SW installation, without SW, without documentation License Key on USB stick, class A, reference HW: PC/PG

Read more less

Siemens 6ED10580BA080YA1 LOGO! SOFT Comfort V8, single license for 1 installation E-SW, SW and documentation on DVD, in 6 languages, runs in Windows XP, 7, 8, 10 (32 and 64 bit), Mac OSx 10.7 Lion up to Mac OSx El Capitan included, Linux SUSE 11.3, SP3, K 3.0.76 LOGO! Soft Comfort V8 is the software for the intuitive programming of LOGO! modules. Over 40 different functional blocks can be selected and can be interconnected quickly and easily with a mouse click, as needed. When communication between several LOGO!s needs to be planned, in addition to the single mode, network mode representation is also available: in this case up to three programs can be displayed simultaneously, the mutual communication is configured automatically. The LOGO! programs of previous versions can be imported into version 8 without any problem.

Read more less

Siemens 6ES75511AB000AB0SIMATIC S7-1500, TM POSINPUT 2 counting units and position detection units for RS-422 incremental encoder or SSI absolute encoder, 2 channels, 2DI, 2DQ for channel SIMATIC ET 200MP is a modular, scalable I/O system for universal use in IP20 and offers the same system advantages as the S7-1500. It enables minimum bus cycle times and very fast response times even for large quantity structures. The distributed I/O system is particularly easy to install, wire and commission. Thanks to the scalable structure, the peripheral station can be customized exactly to the needs on site. The technology units offer hardware-level signal preprocessing for fast counting, exact measurement, position detection and pulse width modulation for a variety of transducers and actuators as well as for the control of stepper motor drives and servo drives via interface PTI.

Read more less

Siemens 6ES75121SM030AB0 SIMATIC DP, CPU 1512SP F-1 PN for ET 200SP, central processing unit with 600 KB work memory for the program and 2 MB for data, 1st interface: PROFINET IRT with 3-port switch, bit performance of 25 ns, SIMATIC Memory Card required, BusAdapter required for port 1 and 2 * *** observe approvals and certificates according to article 109817615 on support.industry.siemens.com ! **** With the SIMATIC ET 200SP, Siemens offers a distributed, multifunctional I/O system that can be easily put into operation thanks to its space-saving design. It is approved for IP20 protection and designed for installation in a compact distribution box. The system ensures maximum flexibility, allowing modules to be replaced quickly and easily at any time thanks to Multi Hot Swapping. Furthermore, the SIMATIC ET 200SP offers you a wide range of communication channels, both diverse and fast. Thanks to the integration of the IM155-6MF MultiFieldbus interface module, you can always react flexibly and use the optimal protocol for your application, as this function supports different Ethernet protocols. Assembly and service are simplified by a uniform identification system, based on reference identification plates and color-coded pin assignment. Siemens ensures you future-proof systems with the integration of innovative and at the same time long-lasting automation products, in fact as industry experts you are already investing in tomorrow's technologies today and thus redefining market standards. Continuous data availability, flexible application cases and versatile integration options ensure the excellent performance of the ET 200 products. Interface modules with integrated CPU and PROFINET connection are available for the SIMATIC ET 200SP. The functionality corresponds to that of a CPU from the SIMATIC S7-1500 family. For the operation of this module a SIMATIC Memory Card.is required

Read more less

Schneider Electric VW3M5D1AR50LXM28 5m motor cable. product range: Lexium 28 - product or component type: power band - accessory category: connection accessory - product compatibility: servo motor BCH2 at 100 W (40 mm) (without brake), servo motor BCH2 at 200 W (60 mm ) (without brake), 400 W (60 mm) BCH2 servo motor (without brake), 400 W (80 mm) BCH2 servo motor (without brake), 50 W (40 mm) BCH2 servo motor (without brake) , servo motor BCH2 at 750 W (80 mm) (without brake) - range compatibility: Lexium 28 - cable length: 5 m. Benefits: .. Applications: ..

Read more less

Siemens 6ES71942MH500AA0bus cable for ET-Connection M8, PUR cable, packaged on both sides with 2x M8 connectors, 4-pin, shielded, length 5.0m SIMATIC ET 200 AL is an IO system in block construction with a high degree of protection IP65/67, a particularly compact design as well as small space requirements and weight. It is especially designed for distributed control electronics in confined spaces as well as in motion and is configured and commissioned quickly and conveniently via the TIA Portal. Standard modules can be deactivated for safety-oriented groups. The I/O modules represent the interface of the SIMATIC ET 200AL to the process. The accessories available for the ET 200AL range from connectors and connecting cables (pre-assembled) to the bus and power supply through the identification plates up to the tool for quickly stripping the bus cable. Accessories for SIMATIC ET 200AL

Read more less